REPAIRS TO VARIOUS B/R RELATED ITEMS TO CERTAIN JCO/OR FAFA ACCN AND PATHAR QTRS IN WING III AREA UNDER GE NASIK ROAD.

Amount

Taking down window/ventilators frames with shutters of any size and any description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note:work is to be executed for high rise bldgs.

Taking down carefully window shutters of any size and description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed. Note:Work is to be executed for high rise bldgs and occupied qtrs on urgency basis,hinges shall also be cut as reqd to fit new window properly.contractors quoted rate deems to be inclusive of the said provision.

S&F aluminium (50 micron powder coated) frame for doors,windows,ventilators and glazed partition frame of any size with one or more rebates including joining cleat,beading,glazing clips and connected accessories as required for fixing etc.complete all as specified. Note.work is to be executed for high rise bldgs.

S&F aluminium (50 micron powder coated) door shutters,aluminium sections weighing 0.55kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,handles 2 nos in each door shutter,hinges,anodised aluminium snap beading screws etc complete all as specified. Note.Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) window and ventilator shutters,sliding type without sash bars,aluminium sections weighing 0.55kg/m including necessary joing cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws, locking etc. Note.Work is to be executed for high rise bldgs.

S&F aluminium(50 micron powder coated) window and ventilator shutters,side hung type without sash bars,aluminium sections weighing 0.55kg/m including necessary joing cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays/tower bolt 150mm long(1nos),hinges type B-21,100mm long(2Nos),suitable handle(2 Nos per shutter). Note.Work is to be executed for high rise bldgs.

S&F 4.0mm thick sheet glass,ordinary quality and glazing with silicon gel in square n. exc 0.5 sqm in each pane. Note.work is to be executed at any height and situation.

M&L for 3.0mm thick frosted sheet glass,ordinary quality and glazing with silicon gel in square n.exc 0.5sqm in each pane.

S&F 4.0 mm thick sheet glass,ordinary quality and glazing with silicon gel in square exc 0.5sqm in each pane. Note.Work is to be executed at any height and situation.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average witdth of aperture 1.40mm and fixed with stainless steel wire staples. Note. Work is to be executed at any height and situation.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm for wiremesh doors,windows etc over and including beading,screws as required to complete the work in all respect.

Dismantling wrought iron or mild any description such as steel gate,steel frame works,purlins,rafter,railings,balusters and window guard bars and directed by engr-in-charge. Note.work is to be executed at any height and situation.

S&F framed work as in grill,doors or gates of angle or other section with gusset plates,braces,etc. complete,drilled for fixing of steel sheeting or other coverings,doors,etc to be prepared for hanging or sliding with and inlcluding either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging;also fastening and fixing Fe Grade 290(Gde E-165) complete all over and including applying two coats of synthetic enamel paint over a coat of primer all as specified and directed by engr-in-charge. Note.work is to be executed at any height and situation.

M&L for complete removal of existing treatment on wall(Internal surfaces) by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,sealing holes,cracks of any width/depth with crack sealing compound(Premium quality as approved by GE) using gun. Note. work is to be executed at any height and situation.

M&L for complete removal of existing treatment on ceiling(Internal surfaces) by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,sealing holes,cracks of any width/depth with crack sealing compound(Premium quality as approved by GE) using gun. Note. work is to be executed at any height and situation.

M&L for 1.5 mm thick(in two coats) acrylic wall care putty on walls as per manufacturers instructions.

M&L for 1.5 mm thick(in two coats) acrylic wall care putty on ceilings as per manufacturers instructions.

M&L for 1.00 mm thick acrylic wall care putty on walls as per manufacturers instruction.

M&L for 1.00 mm thick acrylic wall care putty on ceilings as per manufacturers instructions.

M&L for applying two coats of interior primer over wall surfaces as per manufacturers instruction.

M&L for applying two coats of interior primer over ceiling surfaces as per manufacturers instruction.

M&L for applying one coat of interior primer over wall surfaces as per manufacturers instruction.

M&L for applying one coat of interior primer over ceiling surfaces as per manufacturers instruction.

M&L for applying two coats of acylic distemper oil emulsion on wall surfaces as per manufacturers instruction.

M&L for applying two coats of acylic distemper oil emulsion on ceiling surfaces as per manufacturers instruction.

M&L for applying one coat of acylic distemper oil emulsion on wall surfaces as per manufacturers instruction.

M&L for applying one coat of acylic distemper oil emulsion on ceiling surfaces as per manufacturers instruction.

M&L for complete removal of existing treatment on wall (external surfaces) by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,removing nails,removing vegetation/plant growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by water proof crack sealing compound(premium quality as approved by GE) Note.work to be executed at any height.

M&L for complete removal of existing treatment on ceiling(external surfaces) by brooming down or steel wire brushing;scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots; washing,removing nails,removing vegetation/plant growth of any size and penetration to the entire satisfaction of ground executives,sealing holes,cracks of any width/depth by water proof crack sealing compound(premium quality as approved by GE) Note.work to be executed at any height.

M&L for applying two coats of exterior emulsion paint on wall surfaces. Note.work to be executed at any height.make of paint as per PS.

M&L for applying two coats of exterior emulsion paint on ceiling surfaces. Note. work to be executed at any height.make of paint as per PS.

M&L for applying one coat of exterior emulsion paint on wall surfaces. Note. work to be executed at any height.

M&L for applying one coat of exterior emulsion paint on ceiling surfaces. Note. work to be executed at any height.

M&L for applying one coat of exterior primer on wall surfaces as per manufacturers instruction. Note. work to be executed at any height.

M&L for applying one coat of exterior primer on ceiling surfaces as per manufacturers instruction. Note.work to be executed at any height.

M&L for applying two coats of exterior primer on wall surfaces as per manufacturers instruction. Note. work to be executed at any height.

M&L for applying two coats of exterior primer on ceiling surfaces as per manufacturers instruction. Note. work to be executed at any height.

Taking down completely cement or cement lime plaster,any description on brick or stone walls etc. including raking out joints,hacking for key,scrubing down with water etc. Note. Work to be executed at any height and situation.

M&L for rendering 15mm thick in cement mortar 1:4 on wall/ceiling surfaces finished fair and even. Note. work to be executed at any height.

M&L for redering 10mm thick in cement mortar 1:6 on wall surfaces finished fair and even.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces finished fair and even.

M&L for preparation of old painted wooden surfaces of any description,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description,over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint of tint as directed by engr-in-charge.

Demolition of brickwork or stone/boulder masonry,built in cement mortar or cement lime mortar including all quoins,arches,pillars etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6

M&L for Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh, nails to hold fresh mortar/concrete including necessary formwork ,sccaffolding etc all as per site requirement. Note. work is to be executed at any height any situation.

M&L for plastering on walls in cement mortar 1:4 in patches not exc 3sqm on the building over and including taking down old plastering on walls,any description including finishing the surface including necessary sccaffolding etc. Note.work is to be executed at any height and situation.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs,soffits of the lintels etc. After fixing of new chowkhat or frame to match the existing surface. Note.work is to be executed at any height and situation.

Taking down chowkhats or frames with shutters(without taking off shutters from the frame) exc 1.5 sqm but n. exc 4 sqm each and making good the jambs,soffits of lintels etc. after fixing of new chowkhat or frame to match the existing surface.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each. Note. Work is to be executed at any height and situation.

Taking down shutters of any description exc 2 sqm each. Note. Work is to be executed at any height and situation.

Dismantling wall and ceiling boards(fibre,pulp,insulation,etc.) or insulation boards/slabs/blankets,kitchen cabinets board/CB shutter any thickness,including cover fillets,frame etc.

M&L for 18-20mm thick both side prelaminated(decorative type) solid wpc board as in kitchen cabinets,partition and CB shutters etc over and including suitable butt hinges of ss,magnetic catcher,beading,screws etc complete all as specified and directed to make the shutters/partition fully functional.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type modified flush door shutter with provision of fixing wiremesh of 0.56mm nominal dia of wire and average width of aperture 1.00mm (with provision of fixing mosquitto proofing in decorative fashion as directed by engr-in-charge) (with provision of fixing mosquitto proofing in decorative fashion) of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer -In- Charge. Note.wire mesh door shutter shall be factory made.quoted rate deems to be inclusive of all additional cost for cutting door in size and shape,wastage and wiremesh, beading etc.wiremesh shall not be paid separately.wiremesh shall be fixed between two wpc boards to bring thickness equal to thickness of shutter i.e. 35 mm.circular openings shall be provided as directed by engr-in-charge on both side of wpc boards to enable sufficent cross ventilation.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge over and including M.S. hold fast/ lugs or SS dash fasteners etc.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm(single/double rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

S&F 100mm stainless steel premium butt hinges complete all as specified and directed.

S&F 200mm size aluminium anodised,barrel tower bolts of extruded section and fixed.

S&F 300 mm size aluminium alloy,anodised,sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed.

S&F extruded aluminium alloy handles,125mm size,fabricated type,anodised.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing),removing debris out of MOD land and rubbish off the premises. Note.work is to be executed at any height and situation.

M&L for 40mm cement concrete type B0,1:2:4(12.5 mm graded aggregate) as in levelling course to flooring etc.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4.

M&L for 8-10mm thick double charged vitrified tile ,area of each tile not exceeding 0.36 Sqm as in flooring,laid in any shape/pattern over and including 15mm thick screed in CM 1:6 as in floors,jointed in neat cement slurry and pointed in white cement to match the shade of the tile.

M&L for 8-10 mm thick double charged vitrified tile as in skirting,laid in any shape/pattern over and including 10mm thick backing coat in CM 1:4 and pointed in white cement to match the shade of the tile.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth. After curing period, two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 3 days curing, testing shall be done by flooding for 24 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. Note.work is required to be executed on top priority basis.urgency factor and extra laobour cost shall be deemed to be included by contractor while quoting.Nothing extra shall be paid.

S&F in repairs Vitreous China water closet squatting pan, 'Orissa pattern' size 580 x 440 mm white,with intergral foot rests and P/S trap(excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S&F in repairs 10 litres capacity PVC valveless,syphonic action type,flushing cistern.low level,white,with inlet,ball valve.float and handle including flush pipe and brackets complete all as specified and directed.

S&F in repairs Vitreous china Premium/1st quality wash down water closet wall hung EWC white/ivory/off white(closed pattern incl all necessary accessories like rag bolts/gel gasket,sheet cover,jet spray etc over and including flush pipe complete in all respect all as specified.

S&F in repairs Vitreous china wash basin white,flat back,size 550 x 400 mm,including cutting for and pining in ends of bracket or erecting stand,with and including 32mm waste fitting brass,chromium plated with long screwed shank and fly nut,flange end bedded in red lead cement,brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore,including necessary packing,union and cap and fixed in repairs.

S&F in repairs for PVC(SWR) floor trap (75 mm dia),plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

Taking up or down steel tubing and connections 15 mm bore including bib taps,stop cock etc. Note.work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 15mm bore in new or old position(wall,ceiling,floors,etc.) Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 20mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

Taking up or down steel tubing and connections 20 mm bore. Note.work is to be done in multistorey bldgs(int and ext plumbing)

Refixing old steel tubing and connections 20mm bore in new or old position(wall,ceiling,floors,etc.) Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceiling or laid in floors. Note.GI tubing shall be concealed wherever directed by Engr-in-charge.contractors quoted rates deems to be inclusive of the said provision.

Supplying and laying of CPVC concealed pipes 25mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified(Internal plumbing shall be concealed)

S&F in repairs 15mm bore bib taps,fancy type,cast copper alloy,chromium plated with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule.

S&F in repairs hand shower(health faucet) 1Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and 15mm bore fixed in repair.

S&F Brass CP mixer for mixing hot and cold water,screwed down for iron pipe 15mm bore and fixed in repairs.

S&F in repair 15mm bore fancy type pillar taps,cast copper alloy,with capstan heads,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts.screwed for iron pipe and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated(anlge type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs 15mm bore stop valves,cast copper alloy,fancy type,chromium plated with long shank and cup(concealed type) screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm.

S&F 32mm bore low density polyethylene(LDPE) pipes of pressure rating 6kgf/sqcm including fittings.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joint,including fixing to steel pipe or union 15mm bore.

S&F in repars sink made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330 mmx 160mm.

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar.

M&L for 18 to 20 mm thick Granite(telephonic black) work (Table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick.over and including different type shade/colour all as specified and directed. Note : Granite shall be telephonic black only.In aluminium windows granite shall be used in jambs of windows,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.

M&L for machine cut cudappah stone slab 20-25mm thick over 10 mm thick cement screed base in CM 1:4,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polshing complete.

Rounding to edges of stone slabs one edge,such as in steps,cooking platform and other similar situations(stone slabs so provided shall not be less than 900mm in length).

Dismantling water tanks exc 250 & n exc 500 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage(capacity 500 ltr) tanks(cylindrical vertical with closed top & double layer) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing to store

S&F Rotational moulded polyethylene water storage(capacity 1000 ltr) tanks(cylindrical vertical with closed top & double layer) hoisted and fixed in position all as specified in SSR Part-I(ISI marked).

S&F ball valves,20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.(minimum weight 210 gms) fixed in repairs(ISI marked).

S&F in repairs 25 mm bore matt finish stainless steel(SS-304 grade) curtain rod ,weighing minimum 0.275kg/m best quality as approved by Engr-in-charge over and including suitable projecting type brackets end finals,socket for dead ends of pipe as the case may be.complete all as specified and directed.

Taking down carefully existing bituminious membrane/tarfelt treatment of any description and cleaning and making good only minor damaged surfaces of roof,parapet,facia etc as directed by engr-in-charge and removing rubbish out of defence land.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of concrete(unreinforced) of any description and in any position not otherwise specifically provided for and removing rubbish out of defence land.

M&L for plain cement concrete 1:2:4 type B-0(using 12.5 mm graded aggregate) in roof kerbs or mud stops,ridge,padding,rounded or chamfered on edges.

M&L for rendering 15 mm thick(minimum) in CM 1:4 with intergral waterproofing compound(200ml per bag of cement used) on roof surfaces,parapets,facias etc. Note. Waterproofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound ISI marked complete all as specified and as directed.

M&L for applying evenly a coat of hot blown bitumen grade 85/25 over roof,facia,parapet surfaces at the rate 1.20kg per sqm for fixing app membrane etc including cleaning of surfaces.

M&L for waterproofing on roof including flashing and junctions of parapet,kerb,wall etc as undere-: (a) Laying a layer of APP based polymeric membrane,3mm thick(minimum),weighing not less than 3.60kg/sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160gms/sqm) shall be applied over compatible primer(oil based) at 0.40 litre/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160cps or cold sticker,application of APP modified membrane shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100mm on the longitudinal direction. (b) APP membrane,Primer and bitumastic aluminium paint shall be of same brand. (c) For vertical surfaces of parapet,wall etc. app membrane shall be tucked into groove and sealed with silicon sealant(full width/depth of groove) i.e. "Dowsil 789 weatherproof silicon sealant" using gun. (d) Bitumen and aluminium paint shall be paid separately.

M&L for applying one coat of solar reflective bitumastic aluminium paint at the rate 0.10kg per sqm per coat over exposed app membrane surfaces(old/new) including cleaning of surfaces to the entire satisfaction of ground executives. Make:same as for app membrane.

Disconnecting existing tanks exc 250 n exc 500,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note. Work is to be execute at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000,setting aside(or lowering if required) cleaning and removing all scale,dirt etc. from the mouth of circulating pipes etc and hoisting if required,reconnecting and refixing in position. Note. Work is to be execute at any height and situation.

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc. Note.work is to be executed at any height and situation.

S&F PVC(SWR) pipes 110mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls as RWP over and including fixing clamps,bends,Tee etc. Note.work to be executed at any height and situation.

S&F PVC(SWR) pipes 75 mm bore single socketed,in any length with rubber ring joints,laid in trenches or in floors/walls including all bends,Tee,PVC fixing clamps etc. Note.work to be executed at any height and situation.

Demolition of concrete(unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish out of defence land.

M&L for Plain Cement concrete 1:4:8 type D-2(using 40 mm graded aggregate only) as in foundation,filling and mass concrete,sub bases to plinth protection etc.

M&L for rough shahabad stone 25mm to 30mm thick in flooring/plinth over and including 20mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in CM 1:4 complete all as specified and directed. Note. The quoted rate shall be deemed to be inclusive of providing filleting/edging to the sides in PCC 1:2:4.

Supply and fix in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm ,duly assembled and fixed to wall with wall screws/fasterners all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 'D' shape 20mm dia 600mm long.

NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 42,850.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

J Sams Contructions (BID ID -3122603)

MANOVANDANA CONSTRUCTION (BID ID -3132544)

MAHIMA CONSTRUCTION (BID ID -3132187)

Abhiraj Enterprises (BID ID -3122895)

Vinod Enterprises (BID ID -3128979)

UNITED ENTERPRISES (BID ID -3132723)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3132030)

Bidder Name

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

J Sams Contructions

UNITED ENTERPRISES

Vinod Enterprises

Abhiraj Enterprises

MANOVANDANA CONSTRUCTION