SPECIAL REPAIRS TO VERTICAL SHAFT EXTERNAL PLASTER AND CHAJJAS IN GH PROVN OF COVERED PASSAGE CONNECTING CHOWK NEAR CSD PARKING TO TRISHAKTI AND PROVISION OF ADDN ALTN TO JOINERY PROVISION OF BUILT IN WOODEN CABINETS AND ALLIED WKS AT BGS SECTT AT DS

Amount

Supplying and fabricating and placing in position of new TMT bars of any dia by welding or inserting by drilling holes and embeded in epoxy grout bonding agent of hilti or equivalent for all existing reinforcement repair works in any position wherever necessary complete all as specified and as directed by Engineer-in-charge. Note: The lap provided shall be 15 cm on either side of bar which has lost its sectional area all as specified and as directed

M & L for fair finished flat surfaces of concrete formwork to Chajjas and similar work including edges with scaffolding all as specified and as directed

M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in in chajjas complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as directed.

M & L for cement concrete in Type B1 1:2:4 (20mm gradede aggregate) for coping in chajja, balcony all as specified and as directed.

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (Below or above ground level)

Taking down steel tubing and connections, including cleaning for refixing of 20 mm bore complete.

Taking down steel tubing and connections, including cleaning for refixing of 25 mm bore complete.

Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 20mm bore all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 25mm bore all as specified and as directed.

Taking down CI pipe jointed in cement mortar from of wall upto100 mm dia

S/F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling

S/F(SWR) PVC pipe 75 mm single socketed in any length with ring joints to walls/ceiling

S/F In repairs for removal of old PVC/cast iron floor trap incl wall crossing pipe and fixed with new outlet 75mm PVC (SWR) floor trap with stainless steel grating and new wall crossing and filling with PCC 1:2:4 with water proofing compound including matchng with existing titile and joining with outer pipe line with solvent all as specified and directed by Engg in Charge.

S/F PVC (SWR) bends 110 mm bore with access door

S/FPVC (SWR) single Y 110 mm bore with access door

S/FPVC (SWR) double Y 110 mm bore with access door

S/FPVC (SWR) single Y 75 mm bore

S/F PVC (SWR) bends 75 mm bore with access door

S/FPVC (SWR) double Y 75 mm bore with access door

S/F (SWR) T Single socket equal or unequal (Junction Single) 75 mm with access door

S/F (SWR) T Single socket equal or unequal (Junction Single) 110 mm

S/F PVC(SWR) Vent cover 110 mm

S/F PVC(SWR) Vent cover 75 mm

M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly.

M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound in shaft portion including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work/concrete surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly.

Supply only integral water proofing compound complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L Preparing newly plastered surfaces on external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti-algal weather proof paint complete all as per manufacturer instruction as directed.

Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exe 50m and making good surface in hard/dense soil all as specified and directed.

M&L for Cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in foundations,filling and mass concrete

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240conforming to Fe-410-W(Gde-E-250) quality B complete all as directed by the Engr In Charge.

M&L for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality B complete all as directed by the Engr In Charge.

S&F poly carbonate sheet of approved colour 4 mm thick solid sheet half round of appropriate size including necessary drilling etc. fixed with self tapping screws complete all as directed by the Engr-in Charge.

S&F PVC(SWR) 150 mm dia half round Rain water gutter incl all joints etc complete all as directed by the Engr-in Charge.

S&F PVC(SWR) bends any radius 110mm bore provided with access door.

S&F Aluminium wind tie (flat) with 50 mmx 6mm thick including necessary cutting, drilling and fabrication etc including fixed with self tapping screws on new or old CGI/Polycarbonate roofing etc. all as directed by the Engr-in Charge.

Material and labour for two coat synthetic enamel paint on steel surface over one coat of red oxide primer incl prepareation of new or old steel surface complte all as spd and directed.

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil.

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 (40 mm graded aggregate) as in Sub base floor finished even and fair to receive top layer of floor etc all as directed by the Engineer In Charge.

M&L heavy duty vitrified unporcelain floor tiles of size 300x300 mm , 10 mm thick suitable for heavy vehicles movement, laid in floors/skirting of pattern as approved set and jointed with Epoxy grout with spacers to match over 20 mm thick cement mortar (1:6) all as specified and as directed.make Neo Deccan Natural of Somany , Endura of Johnson, Orient Bell or equivalent.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate steps, seismic and other similar bands, plinth courses string courses, lacingcourses,parapets and railing upto 60cm in height, copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slighty rounded or chamfered angles and throating, complete all as directed.

Removing excavated materialnot exc 1.50 km but n exc 5 km depositing where directed (Soils) at a level not exc.1.5mts above the starting point all as directed by the Engr In Charge.

Material and labour for applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer including preparation of old plasterd surface all as directed by Engr In charge .

Demolition of floor hearth or wall tiling laid bedded and pointed in any mortar (but not backing) incl removing debris from MD Land complete all as specified and directed.

Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc (below or above ground level)as in floors etc and removing debris MD Land complete all as specified and as directed.

Taking down old wooden partition including wooden framing carefully and refix on the same position incl necessary drilling,cutting and repair any damaged lap joints with necessary scantling pieces if required and finish the wooden surface and beading etc all as directed.

Dismantling boarding,partition and any description, fixed in any position with screws all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, removing debris from MD Land complete all as specified and as directed.

Supply and fix UPVC Partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc all as specifed and directed. by the Engr In charge.Make : Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design)

Material and labour for UPVC door with shutters .The construction profile shall be overall frame sectional size 60x 58mm with wall thickness 2.70+/- 0.2mm extruded sections.The corners shall be plastic welded.The hinge side vertical outer frame shall be reiforced with galvanised steel profileof wall using 8mm dia 80mm long MS screws minimum 3 Nos on each side.The glazing shall be fixed to door frame with UPVC standared beading s of sectional size 24.05x16mm & 2mm thick.The bottom portion of door shutter shall be providfed with UPVC board 5mm thick & 1Mtr in height and the balance shall be glazed excluding the shutter frame area.The shutter shall be fixed to frame using 3Nos of 3D hinges.The door shutter shall be provided with 6 mm thick toughened glass & 5mm UPVC board with EPDM rubber gasket,one mortice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified and as directed.The cost of glass, sheet etc shall be deemed with the quoted rate. Make :Madhu Industries / Fenesta / Qute /Sarvesh Multi Plast India Ltd/ SMP Impex /H20 Solution or equivalent.

M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and rough to receive the top finish as in sub base of floor etc all as directed by the Engineer In Charge.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and fair to receive the floor finish complete all as directed.

M&L Coloured Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified

Material and labour for Rendering in Cement Mortar ( 1:6) 15 mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed..

S&F blinds of approved make roller type, Zebra pattern using Polyester/PVC/Vinyl of approved colour /shade and pattern including operating arrangement such as chord/thread, counter weight, connecting chain etc and necessary fittings complete all as specified and as directed.Make : Vista Levolor/Aerolux/MAC

S&F for Toughened glass 10 mm thick,ordinary quality for wall mount shelf for office including fixing to brackets in the wall with suitable washers complete all as specified.

S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed.

Supply and fix in repairs 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.Make : Century/Action Tesa or equivalent.

Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/GODREJ/KAFF/HETTICH

Supply and fix Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix Magnetic closer of suitable size for cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix hydraulic silent soft closing channel for drawers of size 300 mm lenth for cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix lock for cupboard/wardrobe with two keys and key hole cover (silver,painted finish) fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH

S&F 6-8 mm thick PVC wall panels of interlocking types, width 300/305 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed with hidden screws to steel/wooden frame work including necessary frame work complete all as specified and as directed. Note : Quoted rates are inclusive of necessary frame work.

M & L for complete removal of existing treatment from old plastered surfaces of new/old plastered surface of walls and applying two coats of Asian paints Royale Shyne paint or Royale Luxury emulsion of Berger or Dulux Guardian or equivalent (approved colour) over a coat of deco prime primer over and including one coats of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed by GE.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows, ventilators & shelves including providing and fixing hinges/pivots/sliding and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S &F stainless steel wall Mounted Glass Shelf F Bracket 8 Inch length Silver colour | Multipurpose Glass Support Fitting Glass Fixing Clamp Clip Wall Mount Glass Holder for Thickness 6,8,10,12mm complete all as pecified and as directed.

M&L for preparation of new surfaces of walls and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved.

S&F Solid PVC ceiling consisting of 9-10 mm thick colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to steel/wooden frame work including necessary frame work complete all as per specifications and drawing . Make : M/S Marblex tiles/Polyfin Tiles/Armstrong/Krishna Vinyl Tiles/Square foot/Jain Irrigation system/SMP Implex 'SMP-Magma' or equivalent .Note : Quoted rates are inclusive of necessary frame work.

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Note :Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates. (a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.

Description all as per Item No-79 above but (b) One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No-79 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 1.50) sq. mm + (1 x 1.50) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. NOTE for item No. 81.00 &82.00 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed.

S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed.

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed.

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 6 modules all as directed.

S & F TV coaxial socket,1 module complete all as specified and as directed. Cat No.-ACVKTOW001 Make : Legcus of Legrand or Verona of Crabtree(Havells) or Livia of Schneider

S & F internet socket RJ-45, suitable for CAT 6 cable, shielded, folded metal 1 module complete all as specified and as directed. Cat. No. ACVKJWW451 Make : Legcus of Legrand or Verona of Crabtree(Havells) or Livia of Schneider

Supply and fix Coaxial TV cable, RG-6 with less signal losses all as per Cat No.WHOJTTKARG06 of Havells fixed with necessary accessories complete all as specified and as directed

S&F call Bell, AC, Buzzer Ding Dong type 230 Volt.complete all as specified and as directed.

S & F ceiling/wall/panel mounted LED TRACKLIGHT (WHITE COLOUR) 12 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=6500 K ,twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make: Cat No LSPT12 of Luker or techno-commercially equivalent in Philips/Havells Note: Track channel of1/2 Mtrs shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W,including LED Rojo lamps of rating 7W, green with B-22 bas integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips/Havells. Note: Track Lights 12 W shall be measured & paid separately under relevant items.

S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations of auto make the fitment completely capable for use as Engagement light & connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOAJE2TZ1I060, Model - Florentine or techno-commercially equivalent in Philips/Jaguar

S & F wall mounting decorative Picture light of rating 18W, 6500K warm white with aluminum die cast body and PC diffuser with all fixing arrangement forfixing above table and pictured complete all as specified and as directed. Make: Luker, Cat No : LMCL 18 or techno-commercially equivalent in Philips/Havells.

S & F in repair SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S & F in repair SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S&F Miniature circuit Breakers, SPN,of capacity 6-32 Amps C-Series 240 Volts with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers,capacity (6-32 Amps) single pole,C-Series 240 Volts as ordered with breaking capacity 10 KA.

Labour only for Removing and Refixing of serviceable LED decorative/Hanging Light fitting incl connecting Accessories incl proper cleaning and making electrical connections complete all as directed by Engr-in-charge.

S & F rigid non-metallic PVC conduits of external dia 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends with aluminium clamp, bolt, nuts etc for fixing complete all as specified and directed.Make:Precision/Finolex/Polycab

ACE PROMOTERS (BID ID -3238017)

m/s prabakaran (BID ID -3239023)

VENKATESH (BID ID -3240197)

K.AYYAPPAN (BID ID -3239439)

sree devi construction (BID ID -3235579)

shree jayam enterprises (BID ID -3238682)