Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.0 L
EMD Value
₹7,000
Closing Date
26 Nov 2026, 5:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
SE RANDB KHORDHA
O/o the Superintending Engineer R and B Division, Khordha
Repair and maintenance of electrical work in ULB Level MPIS at Banpur NAC in the district of Khordha Buildings.
2026_EICCL_145722_1
TCN-22-26-27
Open Tender
Electrical Works
Percentage
30 days
Khordha
2 documents required · 2 mandatory
₹4,000
₹7,000
Yes
26 Nov 2026
9 Nov 2026
27 Nov 2026
9 Nov 2026
26 Nov 2026
9 Nov 2026
9 Nov 2026 - 20 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and installation of 36Watt Surface/ Recess type Panel light 2x2 ft., Dimension-595mm x 595 mm x 70mm (+/- 10%) of following body material and construction as per IS : 10322 with metalic body driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, driver supply connection with Phase, Neutral and Earth terminal,THD < 10% , P. F. 0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Minimum 5 year OEM warranty. System lumen efficacy >= 130 lm/ Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.
(Thermal management: heat sink of aluminium housing such
that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/ State Govt/ Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) Powder coated die cast/ Extruded aluminium Body (Thickness > 1.20 mm) | 37 | nos | 5,069 | ₹1,87,553 |
| 2 | Supply and installation of 20 Watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F. 0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Minimum 1 year OEM warranty. System lumen efficacy 110 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.
(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/ State Govt/ Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) | 10 | nos | 940 | ₹9,400 |
| 3 | Supply, Installation, Testing and Commissioning of following sweep ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, 100% copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. (Make: USHA/ Havells/ Crompton) 1200mm sweep, BEE 5 star rating, service value 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) (Make: USHA(Technix)/ Havells(Pro28)/ Crompton(Niteo)) | 1 | nos | 4,060 | ₹4,060 |
| 4 | Supplying and fixing flame-retardant antibacterial two module stepped type electronic fan regulator conforming to IS 11037 compatible to existing modular plate having metal back plate & switch box including connections etc. as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) | 4 | nos | 1,083 | ₹4,332 |
| 5 | Supply and installation of 250Watt Flood Light, powder coated pressure die cast aluminium body, Precise lens, Polycarbonate (PC) Lens with built in driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F. 0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect. Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/State Govt/Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) | 37 | nos | 11,639 | ₹4,30,643 |
| 6 | Complete Servicing, overhauling with wet servicing of 1.5 / 2 Ton Split AC/ Ductable AC including checking of Both IDU & ODU Unit | 7 | nos | 4,300 | ₹30,100 |
| 7 | Supply & Installation of surface LED Luminarie of Entry/Exit Light with back up for 2 hrs. of make BAJAJ (CAT: BESL 03 LED SSD WBB) & equivalent of LT/Philips/Crompton | 2 | each | 5,050 | ₹10,100 |
| 8 | Digital Time Switche 2 output 16 A - 250 VA 50/60 Hz Astronomical function 2x28 programmes(Legrand/Schneider/ABB) | 1 | nos | 11,786 | ₹11,786 |
| 9 | Supplying and fixing following ISI Marked modular flame-retardant antibacterial switch/ socket conforming to IS 3854 and IS 1293 on the existing modular plate & switch box including connections as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) 5/6 AMP Switch | 8 | nos | 171 | ₹1,368 |
| 10 | Supplying and fixing following ISI Marked modular flame-retardant antibacterial switch/ socket conforming to IS 3854 and IS 1293 on the existing modular plate & switch box including connections as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) 15/16 AMP Switch | 8 | nos | 306 | ₹2,448 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_2.pdf
PDF • 1.66 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_619570.xls
BOQ • 0.26 MB
corrigendum22.pdf
PDF • 1.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .