Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹24,755
Closing Date
5 Aug 2026, 10:00 pm
Karnataka Power Transmission Corporation Limited
AEE7
9449875901
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
KPTCL/2026-27/IND0311/CALL-2
KPTCL/2026-27/IND0311/CALL-2
Open
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bagalkot
25 documents required · 25 mandatory
The Tenderer shall be a Manufacturer or Authorized Dealers and should have a minimum experience of Five years in and should have a minimum experience of 5 (Five) years in designing, manufacturing, testing and supply of 110V and higher rating battery sets as on the date of bid submission.(Tenderer shall have to upload the supporting documents such as Purchase Order/ order completion certificates/performance certificates demonstrating experience of minimum 5 years as Manufacturer of material/equipment specified in the tender).
The Tenderer should have manufactured and supplied at least 50% (25% in respect of Micro & Small Enterprises) of tendered quantity i.e., at least 1Nos (1Nos. in respect of Micro & Small Enterprises) of 110V and higher rating battery sets to State/Central owned Transmission Utilities/Generation Utilities.Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises.(Tenderers shall have to upload the supporting Documents such as Purchase order copies, order completion certificates/performance certificates issued by State/Central owned Transmission Utilities/Generation Utilities)
The Tenderer shall upload the performance certificates for at least 50%(25% in respect of Micro & Small Enterprises) of tendered quantity i.e., at least 1 Nos (1Nos. in respect of Micro & Small Enterprises) of 110V and higher rating battery sets. The performance certificate shall pertain only to the Battery sets commissioned in State/Central owned Transmission Utilities/ Generation Utilities.The issuing officer of performance certificates shall not be below the rank of Executive Engineer or equivalent Division head. The performance certificate shall indicate all necessary details such as rating of the equipment, make, voltage, name of the substation where it is installed, date of commissioning etc., in order to show that the above Battery sets were in successful operation for at least a minimum period of two years as on the date of bid submission. Tenderers shall have to upload the relevant performance certificates.Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises.
The Tenderer shall be individual Proprietorship firm or partnership firm or Company Registered under Companies Act 1956/2013.Tenderer shall upload Registration certificate/SSI Certificate/Udyam certificate (MSME)/Partnership deed/license issued by the Commerce & Industries department or any other Government statutory Authority shall be uploaded. For Proprietorship firm, PAN and GST registration certificate shall be uploaded.
The Tenderer should have Goods and Service Tax (GST) registration and shall upload the necessary supporting document to establish compliance for having GST registration
The Average Annual Financial Turnover of the Tenderer for best three years out of last preceding five financial years (2020-21, 2021-22, 2022-23, 2023-24 and 2024-25) should not be less than the Amount Put to Tender ie., Rs.12.39Lakh. However, it shall be Rs6.20 Lakh in respect of Micro & Small Enterprises. The Tenderer shall upload audited annual financial statements such as Profit & Loss statements, Balance sheets, turnover certificate for the above period duly certified by a Chartered Accountant. Micro & Small Enterprises shall upload valid MSME (UDYAM) registration certificate obtained from the competent authority certifying that tenderer is a Micro and Small Enterprises
The Liquid Assets as on last date of previous month of tender inviting date or at a later date before submission of the bid consisting of Cash at Bank plus Term Deposits plus availability of fund based credit facilities in any Nationalized/scheduled Bank shall not be less than 25% of the amount put to tender ie., Rs3.10Lakh. However, it shall be Rs 1.55Lakh in respect of Micro & Small Enterprises.The cash at bank, term deposits and availability of fund-based credit facilities shall be supported by a certificate issued by Nationalized/ Scheduled Bank and same shall be uploaded.If the Tenderer has banking with more than one Bank, then the available liquid assets mentioned above on a particular date i.e., as on last date of previous month of tender inviting date or any date before submission of tender shall be the same date for all the banks.In case of Fund based credit facility, the certificate issued by the Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on last date of previous month of tender inviting date or at a later date, before submission of the bid shall be uploaded.
The Tenderer shall upload Test reports not older than Ten years as on the date of bid submission for having conducted successful type tests and additional type tests as specified in tender technical specifications, on 110V battery sets as per the relevant IS/IEC standards at designated laboratories
KPTCL at its discretion, may conduct type tests and/or additional type tests as per technical specifications of the subject tender conducted as per the relevant IS/IEC standards at its cost, on a randomly selected Battery sets by KPTCL officials, at any point of time during the contract at CPRI Laboratory. In case KPTCL opts for conducting type tests and/or additional type tests at CPRI on the randomly selected Battery sets, the same will be conducted at KPTCLs cost. Applicable testing charges of CPRI shall be paid by the Battery sets supplier upfront and the same is reimbursable by the KPTCL as per actual, on submission of bills along with proof of payment, on successful passing of tests. However, the transportation and insurance charges shall be borne by the supplier himself. In case of failure of Battery sets during testing, the Battery sets will not be accepted by KPTCL and KPTCL will not reimburse the testing charges of CPRI to the laboratory. Further, the order placed on the Firm will be cancelled and the performance Bank Guarantee will be forfeited and Tenderer will be de-barred from participating in KPTCL tenders for a period of 1 year. For all the Battery sets already supplied, the Tenderer shall furnish an additional two years guarantee and shall extend the validity of Performance Bank Guarantee accordingly. Tenderer shall upload an undertaking agreeing to above criteria and to bear transportation and insurance charges
Any Tenderer/ Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Tenderer is registered with the Competent Authority. A certificate for having read the clauses specified in Section XVI of the tender documents under the heading Eligibility clauses in respect of restrictions on procurement from a Tenderer/ Bidder of a country which shares a land border with India shall be uploaded by the Tenderer/ Bidder in the following format i)I have read the clause regarding restrictions on procurement from a Tenderer/Bidder of a country which shares a land border with India, I certify that this Tenderer/Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Tenderer/ Bidder, fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached/uploaded.ii) I have read the clause regarding restrictions on procurement from a Tenderer/vendor having Transfer of Technology (ToT) arrangement. I certify that this Tenderer/vendor does not have any ToT arrangement requiring registration with the competent authority OR I have read the clause regarding restrictions on procurement from a Tenderer/Bidder/ vendor having Transfer of Technology (ToT) arrangement. I certify that this Tenderer/ Bidder/ vendor has valid registration to participate in this procurement. Self declaration in the prescribed format shall be uploaded
The Tenderer should not have been DEFAULTED in supplies against Purchase Orders placed by any State/Central Generating/ Transmission Utility/ESCOMs/Distribution companies or any Government Electrical Utilities/ PSUs. Self-declaration in the prescribed format shall be uploaded
The Tenderer should not be under order of debarment/Blacklisting from participating in a Tender by any State/Central Generating/ Transmission Utility/ESCOMs/Distribution companies or any Government Electrical Utilities/ PSUs, as on the last date of submission of bids.Self-declaration in the prescribed format shall be uploaded
The Tenderer should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Tenderer or any partner may result in rejection of Bid.Self-declaration in this regard shall be uploaded
The Tenderer shall upload the Power of Attorney in the prescribed format on Rs.500/- non-judicial stamp paper. Further Power of Attorney shall be sent in original to Chief Engineer, Electy Transmission Operation Zone KPTCL Bagalkote so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids. Note: a) The Bid Enquiry No. shall be clearly and legibly indicated.b) The offer of the Tenderer shall be rejected in the following cases: i.If the Power of Attorney is furnished on the stamp paper of value below Rs 500/ii.In case the date of execution of Power of Attorney is not mentioned.iii.In case the date of execution of Power of Attorney is prior to the date of purchase of Stamp paper. iv.In case the Power of Attorney is submitted without the signature of the Power of Attorney holder and signature of the person who has authorized the Power of Attorney holder.v.In case tender documents including technocommercial sheets are signed by the different person other than the Attorney holder or the person who has authorized the Attorney holder
The offer of the Tenderer taking deviations in following clauses will be summarily rejected. Validity of offer, Earnest Money Deposit/ Bid Security, Performance Security/Contract Performance Guarantee,Payment terms. Guarantee/Warrantee, Liquidated Damages/Penalty for delay in supplies,Stipulated Delivery Schedule, Price Basis, Type Tests, Change in offered quantity against tendered quantity
Any other relavant documents/undertakings/certificates
The Tenderer shall upload Guaranteed Technical Particulars of each rating of material/equipment specified in Annexure-A of the present enquiry in the prescribed format uploaded in Techno-commercial sheet, failing which the bid document is liable for rejection
The Tenderer will be disqualified if they have a record of poor performance against KPTCL orders such as abandoning the contract, not properly completing the contract, inordinate delays in completion of contract, if the failure rate of the equipment/materials supplied to KPTCL (either through direct orders or through EPC Contractors) placed in the preceding 5 years is more than 10% of the quantities of 110kV voltage class Battery sets supplied. Note: The disqualification applies to similar equipment/materials for which above mentioned poor performance is recorded/observed.
Note:1)In case, type test reports of 100V and higher rating battery sets other than those specified in the bid are uploaded, the same are acceptable for the ratios of battery sets specified in the tender, subject to the condition that the Tenderer shall establish similarity in design and construction between type tested battery sets and offered battery sets in the event of an award. In case design and construction similarity between the type tested battery sets and offered battery sets are not established, then the Tenderer shall furnish the type test reports for the class of offered battery sets at the time of inspection of battery sets by KPTCL officers, without affecting the Delivery Schedule and at no extra cost to KPTCL. Bidder shall upload an Undertaking agreeing to this effect along with the bid.2)In case, few of the type test reports and additional type test reports specified in KPTCL Technical specification are not available, the same are acceptable for tender evaluation purpose, subject to the condition that, the Tenderer shall upload an undertaking agreeing to submit all the type test reports and additional type test reports specified in KPTCL Technical specification for having conducted type tests at designated laboratories mentioned above for the highest rating of Battery set in each voltage class specified in the bid, at the time of inspection of Battery sets by KPTCL officers, if the order is placed on the Tenderer without affecting the Delivery Schedule and at no extra cost to KPTCL.3)In the event of an award, the delay in supplies of battery sets due to the delay in establishing design similarity as per Sl. No. (1) or due to delay in submission of all type test reports & additional type test reports as per Sl. No. (2) will be to the account of Successful Tenderer and KPTCL shall have no liability whatsoever in this regard
₹500
₹24,755
21 Jul 2026
21 Jul 2026
6 Aug 2026
24 Jul 2026
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Schedule I: Guaranteed Technical Particulars (TECHNICAL DATA REQUIREMENTS )
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Guaranteed Technical Particulars (TECHNICAL DATA REQUIREMENTS)
Please fill only in the light blue coloured cells.
Sl. No. GUARANTEED TECHNICAL PARTICULARS Units 110V 100AH, Plante type to , Battery sets
2 Plante/Grid Plate: Type reference:
3 Nominal Voltage per cell Volts
4 Manufacture’s Name
5 Standards to which battery is manufactured
6 IS Nomenclature
7 Number of cells in the battery bank
8 Nominal Voltage of Battery Volts
9 Declared Capacity at 27 degree C upto 1.85 ecv
iii). End of Life AH
10 Rated Capacity at minimum ambient temperature Ah
11 Rated Capacity at maximum ambient temperature Ah
12 Capacity in AH at various end cell voltages and duration of discharge
15 minutes 1.65
45 minutes 1.71
13 Open circuit voltage of each battery cell
a). Fully charged
b). Floating condition
c). When completely discharged at
ii). 5 hour rate
iii). 1 hour rate
iv). ½ hour rate
v). 1 Minute rate
vi). 1 second rate
14 Maximum momentary current for 1 min till 1.60 e.c.v.
15 Expected life of battery under normal operation & maintenance conditions Years
16 Internal Resistance of each cell (IR) milli ohms
a). at Fully charged condition
b). at Fully discharged condition
c). at Floating condition
17 Total Resistance of Battery including inter connectors between the cells Ohms
18 Loss in Capacity in 21 hours due to self discharge %
19 Recommended Charging rate for
a). Float charging
i. Limit current A
b). Boost Charging
i. Starting Current A
ii. Finishing current A
20 Trickle Charging Rate
21 Equalizing Charge
c). Duration Hrs.
d). Interval between successive equalizing charge Months
22 a). Time to full charge at finishing rate only Sec
b). Time to full charge at higher starting rate sec
c). Time for full charge to charge by two step charging at starting up and finishing rates Sec
23 Recommended Specific gravity of Electrolyte at 27deg. C
a). for first filling
b). at full charge
c). when Battery is discharged at 10 hours rate
24 Permissible max. temperature of electrolyte
a). During Initial Charging deg C
b). During Normal Charging deg C
25 a.Amount of electrolyte and Specific gravity at 27 deg. C
for first filling
b) Electrolyte conforms to Standard
26 Overall dimensions
i). Each cell L x W x H (tolerance of +/-2mm in each case) mm
ii). Complete Battery mm
27 Distance between cell centres mm
28 Quantity of Electrolyte per cell litres
29 Quantity of Electrolyte for battery (including 10% extra) litres
30 Weight (+/-5%)
Each cell i). without acid Kg
ii). With acid kg
31 Complete Battery i). without acid Kg
ii). With acid kg
32 Weight per cell Kg
a) Active elements- positive Kg
b) Active elements- negative Kg
33 Total shipping weight of Battery units Kg
34 Material and type of Plates
(i). Positive Plates
a). Material and Type
b). Height of Positive Plate mm
c). Thickness of Positive Plate mm
d). Area of Positive Plate Sq.m
e). No. of positive plates per cell
f). Whether positive plates of individual cells are interchangeable
(ii) Negative Plates
a). Material and Type
b). Height of Negative Plate mm
c). Thickness of Negative Plate mm
d). Area of Negative Plate Sq.m
e). No. of Negative plates per cell
f). Whether Negative plates of individual cells are interchangeable
35 Material and type of Separators
a). Material and Type
b). Thickness of separator mm
36 Clearance between bottom of the plate and the bottom of the container mm
37 Clearance between top of the plates and top of container mm
38 Clearance between edges of plates and inner surface of container mm
39 Sediment space (depth) mm
40 Whether explosion vents are offered
41 Type of Vent and Filling Plugs
a). Thickness of Container mm
b). Material of Container & Type
c). Outside dimensions (L x B x H)
a). Type of cover
b). Material of cover
45 Material of Inter-Cell Connectors
46 Thickness of Inter-Cell Connections mm
47 Method of connection
48 a). Inter-row, Inter-tier connectors and end take-offs furnished?
b). Description, Size, current rating, Type & Material
49 Connection hardware with 5% extra furnished?
50 Material of Bolt, Nut and Washer for inter-cell and Cable Connections
51 Cell insulators provided. If yes, material of insulator Yes/No
a). Number of racks per battery
b). Number of cells per rack
c). Type of racks
d). Material of rack
e). Dimensions of the racks
g). Shipping weight
53 Racks provided with
a). Numbering tags for cells
c).Whether anti acid coating is provided
54 Insulator with 5% extra furnished for
55 Ventilation requirements
56 Cubic content of battery rooms m3
57 Gas generation per single cell per hour Lit
58 No. of air exchanges required per hour
59 Standard Maintenance accessories provided Yes/No
60 Gasification Voltage per Cell Volt
61 Characteristic Curves (furnish curve numbers and attach separate sheet)
i). Charge Hours Vs Volts during Boost mode
ii). Discharge hours Vs AH in percent of 10 Hrs. Discharge rate (Capacities at various discharge rates).
iii). Capacity Vs Ambient temperature
iv). Discharge Rate Vs minimum Discharge Voltage
62 Curves showing the relation between the specific gravity & amount of charge in the battery for both charging & discharging conditions(whether furnished) Yes/No
63 Curves showing the relation between cell voltage & charging current when charged at i) finishing rate(whether furnished) Yes/No
ii). High starting rate Yes/No
iii). Two step charging by starting & finishing rate Yes/No
64 Curve of internal resistance at the end of various discharge rates (Whether furnished) Yes/No
65 Recommended Max. period of cell storage before the first Charge (After Installation and filling of Electrolyte)
66 Recommended Storage life of Battery (dry shelf life)
67 Does the battery meet the required duty cycle curve Yes/No
68 Short circuit current at Battery terminals when
a). Float at 2.1 Volts/Cell
b). Boost charge to 2.75 Volts/Cell
69 Time for which the Battery can withstand short circuit at terminals.
70 Dimensioned layout drawings of the rack & battery to be attached with the tender. Yes/No
Note:- Deviations if any from the specifications given here (Schedule-I), which provides for improvement in the functioning of the equipment will be accepted. Such deviations and their advantages shall be clearly brought out in Schedule-II of the tender.
Name of the Company
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- II TECHNICAL DEVIATION
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Please key in the Sl.No., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.
Please don’t insert your Bid values here or else your bid will not be considered for evaluation.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE CHIEF ENGINEER ELECTY., TRANSMISSION(OPERATIONS)ZONE, KPTCL, Bagalkote
I have read each of the Clauses mentioned in NIT, INVITATION FOR TENDERS, INSTRUCTION TO TENDERERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT, QUALIFICATION CRITERIA, SCHEDULE OF REQUIREMENTS, TECHNICAL SPECIFICATIONS with respect to Tender Enquiry No: KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents of Tender Enquiry No: KPTCL/BGKT/CEE/TZ/2026-27/batteryset110Vt for Tender for Design, Manufacture, Testing and Supply of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division, , KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading. These deviations and variations are exhaustive.Except these deviations and variations, the material shall be supplied as per specification and documents.
Sl. No. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS
Note : Deviations specified elsewhere in the specification will not be considered.
Date Name of the Firm, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- III COMMERCIAL DEVIATION
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Please fill Only in the Light Blue Couloured Box
Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.
This Sheet would be opened at the Techno-Commercial Opening.
For any further assistance for submitting your bids please call up KPTCL Office.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.
TO, THE Chief Engineer, Electy, Transmission Operations Zone KPTCL Bagalkote
I have read each of the Clauses mentioned in NIT, INVITATION FOR TENDERS, INSTRUCTION TO TENDERERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT, QUALIFICATION CRITERIA, SCHEDULE OF REQUIREMENTS with respect to Tender Enquiry No: KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V for Tender for Design, Manufacture, Testing and Supply of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division, , KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
The following are the Commercial Deviations and Variations from and exceptions to the Tender documents of Tender Enquiry No: KPTCL/2025-26/IND0191 for Tender for Design, Manufacture, Testing and supply of total quantity of 771 Nos. of 66kV class Current Transformers of various ratios i.e., 1000-600/1-1-1A, 200-100/1-1-1A, 1600-1000/1-1-1A, 800-400/1-1-1A, 1000-800/1-1-1A, 1200-800/1-1-1A, along with 86Nos. of Marshalling Box conforming to KPTCL technical specification, F.O.R.D at Store/Site basis, including insurance, transportation and unloading.
SlNO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/ VARIATIONS
Note : Deviations specified elsewhere in the specification will not be considered.
Date Name of the Firm, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
A) Details to demonstrate Manufacturing experience of 5 years
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
SHEET FOR TECHNO-COMMERCIAL OPENING
Please don’t insert your Bid values here or else your bid will not be considered for evaluation. Please fill only in blue coloured cells.
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate Manufacturing experience of 5 years Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
I) Details to demonstrate Manufacturing experience of 5 years
NOTE: Supporting documents to be uploaded
Sl. No. Name of the Manufacturer Name of the equipment Qty. Purchaser as specified in QR P.O Ref and Date of Order Date of Supply Date of commissioning Remarks
Date Name of the Firm, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(B) Details to demonstrate past supplies
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate past supply details Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
NOTE: Supporting documents to be uploaded
Orders placed by (Full address of Purchaser) Order No and Date Description of Goods ordered Quantity of Goods ordered Value of Order Date of Completion of Delivery Remarks indicating reasons for late delivery, Has the goods/ equipment been satisfactorily functioning. (Attach a Certificate from the Purchaser)
As per contract Actual
Date Name of the Tenderer, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(C) Details to demonstrate satisfactory Performance of equipment for 2 years
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of earlier orders to demonstrate satisfactory performance of the equipment for 2 years Complete in all respects executed by us,details of which are being furnished by us in the support of qualifying requirements of Tender Enquiry No. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
NOTE: Supporting documents to be uploaded
Orders placed by (Full address of Purchaser) Order No and Date Description of Goods ordered Quantity of Goods ordered Value of Order Date of Completion of Delivery Remarks indicating reasons for late delivery, Has the goods/ equipment been satisfactorily functioning. (Attach a Certificate from the Purchaser) Period in years of satisfactory functioning of Goods from the date of commissioning
As per contract Actual
Date Name of the Tenderer, Address & GSTIN Number
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
SCHEDULE- IV QUALIFYING REQUIREMENT DATA
(D) Details of Type test & additional type test reports
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)
We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)
We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)
Following (mentioned below) is the list of type test & additional type test reports of the equipment, which are being furnished by us in the support of qualifying requirements of Tender Enquiry No.KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
NOTE: Supporting documents to be uploaded
Name of the equipment Name of the Laboratory at which Type tests are conducted Date of Test report Name of the Test Test result Remarks if any
Date Name of the Tenderer, Address & GSTIN Number
SCHEDULE V ASSESSEMENT OF FINANCIAL CAPABILITY OF THE BIDDER
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
1 Name of the Tenderer
3 Details of Material to be supplied
4 Quantity tendered
Sl.No. Particulars
1 Annual Turnover for the last Five years Sl No. Year
2 Liquid Assets as per Financial Criteria
3 Capital assets for the last Five years
4 Current Ratio for the last year
5 Current Assets
6 Current Liabilities
7 Documents to be enclosed. 1 Audited Balance sheet for the last Five years
2 Banker's /Financial Institutions endorsement for limit of Financial leading.
Date Name of the Firm, Address & GSTIN Number
Place Desgination
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
Sl. No. Terms & Conditions As per tender As per Bidder
1 Name of the Firm To be furnished by the bidder
2 Place of Manufacture To be furnished by the bidder
3 Scope of the proposal Refer:SECTION II: A of Introduction of ITT, Scope of Tender
4 Power of Auttorney for signing the Documents To be Uploaded by the bidder
5 Bid Form To be uploaded
6 Bid Security/EMD As per Clause No 12 of NIT
7 Bid Validity 180 days from the last date of submission of bids
8 Manufacturer /Supplier As per SECTION VII : QUALIFICATION CRITERIA
9 Experience SECTION VII : QUALIFICATION CRITERIA
10 Quantity Tendered / offered SECTION V: SCHEDULE OF REQUIREMENTS AND DESIRED DELIVERIES
11 Prices The tenderer shall quote Firm Price only
12 Taxes & Levies as per tender condition
13 Payment Terms As per Clause 05 of SCC
14 Warranty/Guarantee As per Section III of GCC Cl.No.14
15 Penalty for delay in supplies As per Section III of GCC Cl.No.22
16 Delivery/Completion Schedule As per Section V of Schedule of requirement & desired deliveries
17 Termination of contract As per Section III of GCC Clause No.23
18 Performance Security As per Section III of GCC Cl.No.6
19 Guaranteed Technical Particulars To be furnished by the bidder as per Technical Specification
Date Name of the Firm, Address & GSTIN Number
Place Desgination
KARNATAKA POWER TRANSMISSION CORPORATION LIMITED
Tender Enquiry NO. KPTCL/BGKT/CEE/TZ/2026-27/batteryset110V
Tender for Design, Manufacture, Testing and Supply, installation and commissioning of 110V DC, 200AH Plante type Battery sets under Buy Back Scheme at 110KV Girisagar S/S and 110KV Hungund S/S under Operations Division KPTCL, Bagalkote conforming to Technical Specifications. F.O.R.D at Store/Site basis, including insurance, transportation and unloading
CHECK LIST FOR QUALIFYING REQUIREMENT
Please make sure that the following supporting document are uploaded without which the tender is liable for rejection.
Sl. No. Particular Tenderer’s Compliance
I Qualification Criteria stipulated in Section-VII Whether Documentary supports enclosed or not Indicate Yes/NO Type of documents uploaded
1 QR regarding status of Tenderer/type of company
For details, refer Section-VII
2 QR regarding GST registration
For details, refer Section-VII
A Technical Criteria: The Tenderer should establish their experience (the “Technical Capacity”) as set out below:
3 QR regarding manufacturing experience of 5 years.
For details, refer Section-VII
4 QR regarding past supply details
For details, refer Section-VII
5 QR regarding past performance of equipment
For details, refer Section-VII
6 QR regarding Guaranteed Technical Particulars of of each rating of material/equipment specified in Annexure-A of the present enquiry in the prescribed format to be uploaded in Techno-commercial sheet.
For details, refer Section-VII
7 QR regarding type test reports.
Type test reports and additional type test reports.
For details, refer Section-VII
8 QR regarding repetition of type tests and additional tests in case KPTCL insists.
Relevant undertaking adhering to this QR.
For details, refer Section-VII
B Financial Criteria: The Tenderer should have the following financial capacity (the “Financial Capacity”).
9 QR regarding Annual Financial Turnover of the Tenderer
For details, refer Section-VII
10 QR regarding Liquid Assets
For details, refer Section-VII
C General Criteria
11 Self-declaration in the prescribed format as per Section-XVI regarding “Eligibility clauses in respect of restrictions on procurement from a Tenderer/Bidder of a country which shares a land border with India”.
For details, refer Section-VII
12 Details of performance of past supplies of Tenderer
For details, refer Section-VII
13 Self-declaration in the prescribed format regarding DEFAULTED in supplies.
For details, refer Section-VII
14 Self-declaration in the prescribed format regarding debarment/Blacklisting.
For details, refer Section-VII
15 Litigation History: Self -declaration in the prescribed format regarding litigation history.
For details, refer Section-VII
16 Power of Attorney in the prescribed format Section VIII (Appendix C) on Rs.500/- non-judicial stamp paper and shall be sent in original to Chief General Manager (Tech), KPTCL, Bangalore so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids.
For details, refer Section-VII
17 No deviation certificate.
For details, refer Section-VII
II Other Details Whether uploaded or not Type of documents uploaded
1 Tender Form in the format prescribed at Section-VIII (Appendix A).
2 Details of Tenderer in the format prescribed at Section-VIII (Appendix B) along with supporting documents;
3 Power of Attorney for Signing of Proposal in the format prescribed at Section VIII (Appendix C)
4 Checklist of documents uploaded by the Tenderer along with the Tender prescribed at Section VIII (Appendix D)
5 Earnest Money Deposit in the manner and form at Section-IX as specified in Clause 13 of ITT
6 Technical Capacity of the Tenderer in the format prescribed at Section-XII, along with supporting documents
7 Equipment And Quality Control Employed By the Manufacturer in the format prescribed at Section-XIV
8 Techno–Commercial sheets duly filled in, Data requirement sheets/GTP.
9 All other relevant documents/ undertakings/declarations/details specified in the Tender document.
Date Name of the Tenderer, Address & GSTIN Number
Place Desgination
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
311 Call2.pdf
Others - NIT • 0.75 MB
Technocommercial sheets 110V Battery set.xlsx
Techno-Commercial Worksheet • 0.10 MB
Section 1 to 16 110V Battery set.zip
Tender Document • 1.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].