REPAIR MAINT OF EXTERNAL WATER SUPPLY DISTRIBUTION NETWORK OF PUMP HOUSE NO 1 AND RAW WATER PUMP HOUSE INCLUDING FILTRATION PLANT PUMP MOTORS STARTER AND CLEANING OF OHT AND UG SUMPS AT FARIDKOT MIL STN

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying pipes and getting out in soft/loose soil all as specified and directed by Engr-in-Charge

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm all as specified and directed by Engr-in-Charge.

Removing the excavated soil from the trench n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed by Engr-in-Charge.

All as per Ser item No 04 here-in-before but bore of pipe 200/150mm complete all as specified and directed

All as per Ser item No 04 here-in-before but bore of pipe 100/80mm complete all as specified and directed

Attending of complaints water supply and Detection of leakage in main water line by necessary excavation in any type of soil, in any situation/depth including bailing out leakage water by suitable measures, repair to GI/ CPVC/ HDPE/ PVC pipe of size 15 mm bore as occurring at Site including cutting threading for addition & alternation and for insertion of fittings/ accessories GI/ CPVC/ HDPE/ PVC all as required. Notes : (i) Rate quoted shall be including necessary excavation/ filling making good the existing surfaces with the necessary T&P as required all as directed by the Engineer-in-Charge. (ii) Pipe fittings shall be measured and paid separately

All as per Srl Item No. 07 here-in-before but 20 mm bore

All as per Srl Item No. 07 here-in-before but 25 mm bore

All as per Srl Item No. 07 here-in-before but 40 mm bore

All as per Srl Item No. 07 here-in-before but 50 mm bore

Supply only GI Elbow 20 mm bore complete all as specified and directed

Supply only GI Elbow 25 mm bore complete all as specified and directed

Supply only GI Elbow 40 mm bore complete all as specified and directed

Supply only GI Elbow 50 mm bore complete all as specified and directed

Supply only GI Union 20 mm bore complete all as specified and directed

Supply only GI Union 25 mm bore complete all as specified and directed

Supply only GI Union 40 mm bore complete all as specified and directed

Supply only GI Union 50 mm bore complete all as specified and directed

Supply only GI Socket 20 mm bore complete all as specified and directed

Supply only GI Socket 25 mm bore complete all as specified and directed

Supply only GI Socket 40 mm bore complete all as specified and directed

Supply only GI Socket 50 mm bore complete all as specified and directed

Supply only GI Nipple 20 mm bore of length 0.15m complete all as specified and directed

Supply only GI Nipple 25 mm bore of length 0.15m complete all as specified and directed

Supply only GI Nipple 40 mm bore of length 0.15m complete all as specified and directed

Supply only GI Nipple 50 mm bore of length 0.15m complete all as specified and directed

Supply only GI Tee 20X20X20 mm bore complete all as specified and directed

Supply only GI Tee 25X25X25 mm bore complete all as specified and directed

Supply only GI Tee 40X40X40 mm bore complete all as specified and directed

Supply only GI Tee 50X50X50 mm bore complete all as specified and directed

Taking up or down GI pipe and any type pipe and connections, including all fitting 15 mm bore complete all as specified and directed by Engr-in-charge.

Taking up or down GI pipe and any type pipe and connections, including all fitting 20 mm bore complete all as specified and directed by Engr-in-charge.

Taking up or down GI pipe and any type pipe and connections, including all fitting 25 mm bore complete all as specified and directed by Engr-in-charge.

Taking up or down GI pipe and any type pipe and connections, including all fitting 40 mm bore complete all as specified and directed by Engr-in-charge.

Taking up or down GI pipe and any type pipe and connections, including all fitting 50 mm bore complete all as specified and directed by Engr-in-charge.

S&F in repair GI water Tubing, 15 mm dia ISI Marked, 'Medium grade' galvanised, including tube fittings Viz Tees Socket elbows, union nipple etc screwed and socketed joint laid in wall and ceiling or laid in floors with all fitting complete all as specified.

S&F in repair GI laying steel water Tubing, 20 mm dia ISI Marked, 'Medium grade' galvanised, including tube fittings Viz Tees Socket elbows, union nipple etc screwed and socketed joint laid in wall and ceiling or laid in floors with all fitting complete all as specified.

S&F in repair GI laying steel water Tubing, 25 mm dia ISI Marked, 'Medium grade' galvanised, including tube fittings Viz Tees Socket elbows, union nipple etc screwed and socketed joint laid in wall and ceiling or laid in floors trenches/under road with all fitting complete all as specified.

S&F in repair GI steel water Tubing, 40 mm dia ISI Marked, 'Medium grade' galvanised, including tube fittings Viz Tees Socket elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified.

S&F in repair GI steel water Tubing, 50 mm dia ISI Marked, 'Medium grade' galvanised, including tube fittings Viz Tees Socket elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified.

Fixing only in repair of Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed 20 mm bore of pipe complete all as specified and directed by Engr-in-charge. Note: Gate Valves issued by department free for fixing.

Fixing only in repair of Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed 25 mm bore of pipe complete all as specified and directed by Engr-in-charge. Note: Gate Valves issued by department free for fixing.

Fixing only in repair of Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed 40 mm bore of pipe complete all as specified and directed by Engr-in-charge. Note: Gate Valves issued by department free for fixing.

Fixing only in repair of Gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed 50 mm bore of pipe complete all as specified and directed by Engr-in-charge. Note: Gate Valves issued by department free for fixing.

S&F in repair 80 mm CI / DI Pipe with Flanged ends Centrifugally cast Class A in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 100 mm CI / DI Pipe with Flanged ends Centrifugally cast Class A in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 150 mm CI/ DI Pipe with Flanged ends Centrifugally cast Class A in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 80 mm DI Pipe with Socketed ends flanged, Class K7 in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 100 mm DI Pipe with Socketed ends flanged, Class K7 in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 150 mm DI Pipe with Socketed ends flanged, Class K7 in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 200 mm DI Pipe with Socketed ends flanged, Class K7 in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair 300 mm DI Pipe with Socketed ends flanged, Class K7 in any length laid in trenches pipes "ISI" marked including suitable nuts and bolts and taking up old unserviceable pipe complete all as specified.

S&F in repair CI Fittings up to 300 mm i.e bends, any type radius and angle, Straight bend, Tee, Collar, caps and plugs complete all as specified and directed

M&L for comprehensive maintenance of sluice valve of size 300 mm dia including dismantling, inspection, repair & replacement of damaged parts like spindle, gland packing, seating ring, etc, cleaning, lubrication and reassembly to ensure proper functioning, lapping and polishing of seating surfaces, application of anti-corrosion coating if required, again refixing at same location etc all as specified and directed

M&L for comprehensive maintenance of sluice valve of size 200 mm dia including dismantling, inspection, repair & replacement of damaged parts like spindle, gland packing, seating ring, etc, cleaning, lubrication and reassembly to ensure proper functioning, lapping and polishing of seating surfaces, application of anti-corrosion coating if required, again refixing at same location etc all as specified and directed

M&L for comprehensive maintenance of sluice valve of size 150 mm dia including dismantling, inspection, repair & replacement of damaged parts like spindle, gland packing, seating ring, etc, cleaning, lubrication and reassembly to ensure proper functioning, lapping and polishing of seating surfaces, application of anti-corrosion coating if required, again refixing at same location etc all as specified and directed

M&L for comprehensive maintenance of sluice valve of size 100 mm gia including dismantling, inspection, repair & replacement of damaged parts like spindle, gland packing, seating ring, etc, cleaning, lubrication and reassembly to ensure proper functioning, lapping and polishing of seating surfaces, application of anti-corrosion coating if required, again refixing at same location etc all as specified and directed

M&L for comprehensive maintenance of sluice valve of size 80 mm dia including dismantling, inspection, repair & replacement of damaged parts like spindle, gland packing, seating ring, etc, cleaning, lubrication and reassembly to ensure proper functioning, lapping and polishing of seating surfaces, application of anti-corrosion coating if required, again refixing at same location etc all as specified and directed

M&L for comprehensive maintenance of cleaning sluice valve pit chambers of size 450X450X450mm to 1020x1020X1020 mm all as specified and directed

M&L for comprehensive maintenance of repair & replacement of damaged sluice valves gland packing suitable size and replacement of rushed nuts and bolts etc, reassembly to ensure proper functioning, all as specified and directed

S&F in repair of CI/DI Sluice valve flanged Type, class PN 1.6 , 200 mm bore (8") ISI marked conforming to IS- 14846-2000 complete with gunmetal spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable for CI/DI pipe line including jointing material i.e. nuts bolts, washer and gasket complete all as specified

Supply, installation and testing in replacement of CI/DI Sluice valve flanged Type, class PN 1.6, 150 mm bore (6") ISI marked conforming to IS- 14846-2000 complete with gunmetal spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable for CI/DI pipe line including jointing material i.e. nuts bolts, washer and gasket complete all as specified.

Supply, installation and testing in replacement of CI/DI Sluice valve flanged Type, class PN 1.6 , 100 mm bore (4") ISI marked conforming to IS- 14846-2000 complete with gunmetal spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable for CI/DI pipe line including jointing material i.e. nuts bolts, washer and gasket complete all as specified.

Supply, installation and testing in replacement of CI/DI Sluice valve flanged Type, class PN 1.6, 80 mm bore ISI marked conforming to IS- 14846-2000 complete with gunmetal spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable for CI/DI pipe line including jointing material i.e. nuts bolts, washer and gasket complete all as specified

S&F in replacement 80 mm bore cast iron air release valves, flanged type with two air out lets and including jointing materials such as nuts, bolts, washers and rubber sheet etc complete all as specified and directed by Engr-in-charge

M&L for comprehensive maintenance of non return valve of size 80/100 mm dia, inspection, repair & replacement of damaged parts such as valve plates, springs, seals, gaskets, etc, cleaning and removal of debris, dust and necessary lath work, reassembly all as specified and directed

M&L for comprehensive maintenance of non return valve of size 150/200 mm dia, inspection, repair & replacement of damaged parts such as valve plates, springs, seals, gaskets, etc, cleaning and removal of debris, dust and necessary lath work, reassembly all as specified and directed

M&L for comprehensive maintenance of non return valve of size 300 mm dia, inspection, repair & replacement of damaged parts such as valve plates, springs, seals, gaskets, etc, cleaning and removal of debris, dust and necessary lath work, reassembly all as specified and directed

S&F in repair and testing size of 300 mm bore NON Return Valves ISI marked with flanged both ends drilled, including jointing material i.e. nuts bolts, washer and gasket complete all as specified

All as per Srl Item No. 70 here-in-before but size of 200 mm bore

All as per Srl Item No. 70 here-in-before but size of 150 mm bore

All as per Srl Item No. 70 here-in-before but size of 100 mm bore

All as per Srl Item No. 70 here-in-before but size of 80 mm bore

S&F in replacement CI foot valve (Flanged) 300mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed.

S&F in replacement CI foot valve (Flanged) 200mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed.

S&F in replacement CI foot valve (Flanged) 150mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed.

S&F in replacement CI foot valve (Flanged) 100mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed.

S&F in replacement CI foot valve (Flanged) 80 mm dia confirming to IS 4038 including jointing with rubber fibre board gasket, nut bolts etc complete all as specified and directed.

Taking proper shut down in writing, disconnecting all the electrical connections, dismantling the motor from the base plate and transporting the same for repair to workshop for rewinding, dismantling the motor/rotor, cutting and removing the old heated up/burnt winding of the Starter/Roter, cleaning the slots, bearing, bushes etc ,rewinding the motor Starter/Roter with super enamelled copper winding wire of existing size , gauge and turns etc including all the insulating materials ie. varnish ,china glass paper, 'F' class paper, insulating paper etc and transportation back the same after winding , reassembling at original position and testing complete of electric moto 100 HP,3 phase,415 volts, AC supply all as specified and directed . Note:-(a) The contractor shall return the motor within week’s time after handing over for repairs to contractor otherwise a penalty of Rs. 1000/- per day will be charged from the contractor. (b)The rates quoted shall be deemed to include the cost of loading/unloading, transportation, nuts bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed. (c)The contractor shall arrange a visit of Engr-in-Charge to workshop for each job and cutting of complete burnt winding of motor shall be completed in presence of Engr-in-Charge

All as per Ser item No 80 here-in-before but of capacity 75 HP, complete all as specified and directed by Engineer in Charge.

All as per Ser item No 80 here-in-before but of capacity 40 HP, complete all as specified and directed by Engineer in Charge.

All as per Ser item No 80 here-in-before but of capacity 30 HP, complete all as specified and directed by Engineer in Charge.

All as per Ser item No 80 here-in-before but of capacity 12.5 HP, complete all as specified and directed by Engineer in Charge.

All as per Ser item No 80 here-in-before but of capacity 10 HP, complete all as specified and directed by Engineer in Charge.

All as per Ser item No 80 here-in-before but of capacity 5 HP, complete all as specified and directed by Engineer in Charge.

All as per Ser item No 80 here-in-before but of capacity 2-3 HP, complete all as specified and directed by Engineer in Charge.

Supply and laying XLPE LT Cable of size 10 Sqmm, 2 core, 1100 Volt grade heavy duty with XLPE insulated, stranded aluminium conductor served with an inner sheathening of PVC tape armoured with Galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-1) with latest amendments laid in trenches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and directed by Engineer-in-charge

S&F energy efficient LED security light filling of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 2 core flexible copper conductor cable 1Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of Gl tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-charge

S&F in repair Star Delta Starter, fully automatic, suitable for 50 HP, 415 volts complete all as specified and directed.

S&F in repair Star Delta Starter, fully automatic, suitable for 12 HP, 415 volts complete all as specified and directed.

S&F in repair Star Delta Starter, fully automatic, suitable for 7.5 HP, 415 volts complete all as specified and directed.

S&F in repair Star Delta Starter, fully automatic, suitable for 5.00 HP, 415 volts complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in in roof kerbs/coping/bed plates and the likes including weathering slightly rounded or champhered angles with necessary use and waste of formwork for pipe support, finishing even and smooth without using extra cement complete all as specified

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 100 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 75HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 40 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 30 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 15 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 12.5 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 5 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for disconnecting/dismantling, strip opening and overhauling of pumping set of any make and capacity of 3 HP, taking out bearing, bushes, impeller and coupling plates etc and greasing of bearings with superior quality and replacement of brass bushes, tyre coupling, slip, impeller grinding, bearing, shaft, gland bush rusted nut bolts and washer, seal etc and lath work on shaft including proper alignment and re-assembling, installing at original position and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M&L for removal of mud and sludge from the Fluculater tank including cleaning of internal side of fluculator with proper cleaning material complete all as specified and directed

Site clearance and surface dressing by cutting and removing of elephant/wild grass (sarkanda) from all around the periphery of raw water reservoir and removing from site to a distance not exc 50 m complete all as specified and directed

S&F in replacement flexible type coupling containing tread inside, of size TC-15 complete all as specified and directed

S&F in replacement flexible type coupling containing tread inside, of size TC-17/TC-19 complete all as specified and directed

Chemical examination of raw water of the plant at water point No 1 from authorised laboratory complete all as specified and directed. Note:- Report to be submitted in triplicate.

Bacteriological examination of clear water of the plant at water point No 1 from authorised laboratory complete all as specified and directed. Note:- Report to be submitted in triplicate.

Supply only vinegar suitable for spraying on grass at water supply installations complete all as specified and directed.

Repair and servicing of fluculators assembly, oiling, greasing of rotating and fixed arms, replacement of central thrust bearing , slip ring assembly , repair servicing of flocculator shaft including MS stirrers and blowers complete all as specified and directed

M&L for removing/cleaning of mud & sludge upto the bottom of raw water receiving basin of size 11.75 x 7.70 x 3.75 m deep including cleaning of weeds, bushes and vegetation etc inside the tank and upto 3 m distance in surrounding area of raw water basin and disposal of the removed silt/soil to a distance not exc 50 m and depositing where directed at a level n.exc.1.5 m above the starting point complete all as specified and directed

All as per Ser item No 111 here-in-before but upto bottom of sludge tank of size 12.00 m dia x 2.75 m deep complete all as specified and directed

Removal of mud and sludge from the wells including cleaning of internal side of jack well / fluculator with proper cleaning material complete all as specified and directed

Site clearance and surface dressing by cutting and removing of elephant/wild grass (sarkanda) from all around the periphery of raw water reservoir and removing from site to a distance not exc 50 m complete all as specified and directed

Chemical examination of raw water Pump House from authorised laboratory complete all as specified and directed. Note:- Report to be submitted in triplicate.

Bacteriological examination of raw water of Pump House from authorised laboratory complete all as specified and directed. Note:- Report to be submitted in triplicate.

S&F nut and bolts of different sizes including washers to be used for water supply machinery complete all as specified and directed

M&L for construction of Valve pit of size 1050mmX1050mmX1050mm (internal dimensions) (Type-B and 1:4 cement mortar) with brick masonry constructed including necessary excavation and earth work in suft/loose soil, brick work, plastering, white wash PCC coping, and all as specified and directed by Engr in-Charge

M&L for construction of Valve pit of size 900mmX900mmX900mm (internal dimensions) (Type-B brick and 1:4 cement mortar) with brick masonry constricted Including necessary excavation and earth work in soft/loose soil brick work plastering, white wash, PCC coping, and all as specified and directed by Engr-in-Charge

M&L for construction of Valve pit of size 450mmX450mmX450mm internal dimensions) (Type-B brick and 1:4 cement mortar) with brick masonry constructed Including necessary excavation and earth work in soft/loose soil, brick work, plastering, white wash, PCC coping, and all as specified and directed by Engr-in-Charge

Cleaning of RCC Overhead reservoir of capacity 0.75 to 1.00 Lakh gallon and at approx. 18 mtr staging by scrapping the bottom surface & side walls by brooming with hard wire brush, removal of sludge/mudibilt and other foreign materials from the bottom with the help of buckets & rope manually brought down to the ground level, preliminary washing properly, thereafter washing with concentrated bleaching powder solution (10 1) of water and bleaching powder respectively and disposal of collected sludge mud material to a distance exc. 50 m but not exceeding 100 m from the site including applying a coat of cement base primer and making water supply system functional Date of cleaning shall be written with white paint on the black strip approx size 30x24" all as specified and directed

All as per Srl item No 121 here-in-before but RCC Overhead reservoir of capacity: 0.50 Lakh gallon complete all as specified and directed

M&L for repair rewiring of motor of any starter of any capacity including connection with motor by new copper lugs and testing of motor at site complete all as specified and directed

M&L for pumping out drainage water tank with own arrangement including T & P and Removing/cleaning of mud & sludge upto the bottom of drain water receiving tank of size 35x35 to 3 mtr deep including cleaning of weeds, bushes and vegetation etc inside the tank and upto 3m distance in surrounding area of drainage water tank and disposal of the removed silt/soil to a distance not exc 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed

M&L in replacement Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for GI pipe 20mm and fixed complete all as specified and directed

mehar buildcon (BID ID -3482286)

SHIV SHAKTI BUILDERS (BID ID -3481811)