PROVN OF 10 X TOILET BLOCKS NEAR BLDG NO P-181 (PERS LINE) OF 423 FD HOSPITAL AT DIPATOLI MIL STATION

Amount

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregates as in foundation filling mass concrete complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

M&L for 75mm thick cement concrete as in sub base of floor with (1:3:6) type C2, using 40mm graded stone aggregate complete all as specified and as directed.

M&L for 40mm thick cement concrete (1:2:4) using 20mm graded aggregate as in floors over sub base, surface finished even and smooth without using extra cement complete all as specified and as directed.

Returning/filling in layers n exc 25 cm thick including spreading, levelling, watering and well ramming etc complete all as specified and as directed.

Removing excavated soil to distance n exc 50 mtr and deposited where directed at a level n exc 1.5 mtr high from starting point complete all as specified and as directed.

M&L for 15mm thick plastering on wall concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:4) on brick/concrete surface, finished the surface even and smooth with using water proofing compound complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperetely.

M&L for rendering 5 mm thick cement plaster in CM(1:3), on fair faces of concrete of ceiling surface complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for hard core of gauge n exc 63 mm of broken stone or boulders deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection /path etc complete all as specified and as directed.

S & F PVC door chowkhats of size (50mm x 47mm) made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F stainless steel butt hinges 75mm long medium weight complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section and fixed of 150mm size complete all as specified and directed.

S&F 125mm size aluminium handles, cast type anodised complete all as specified and directed.

S & F 15mm dia stop valve CP, fancy type, long body, screwed to union or GI pipe etc complete all as specified and as directed.

S & F 15mm dia stop valve CP, fancy type, long body, screwed to unioun or GI pipe etc (Concealed type) complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size complete all as specified and directed.

S & F GI water tubes medium grade 15mm bore with fittings laid in floors/wals etc complete all as specified and directed .

S & F soap dish, vitreous China white, approximate size (160x 160x90)mm complete all as specified and as directed .

S & F vitreous china squatting pan, 'Orissa' pattern, of size (580 x 440)mm white, with integral foot rests, including trap, set in and including concrete, connection to trap, and to flushing pipe, anti-syphonic pipe, etc complete including making good of floor (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F bib tap brass CP 15mm dia chromium plated with butter fly handle fancy type complete all as specified and directed.

S&F bib tap brass CP 20mm dia chromium plated with butter fly handle fancy type complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, long bend with and including flush pipe of PVC 32mm dia and connection to pipes etc complete all as specified and as directed.

S&F PVC connections 15mm size and 450mm length complete all as specified and as directed.

S&F 110mm dia PVC(SWR) WC connections short connections bent type complete all as specified and as directed.

S&F 110mm PVC (SWR) branch pieces, single equal or unequal complete all as specified and as directed.

S&F 110mm PVC (SWR) Bends any radius complete all as specified and as directed.

S&F 110mm PVC(SWR) vent cowls complete all as specified and as directed.

S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints, fixed in wall complete all as specified and as directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L for cast iron 100mm floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L for providing pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in manhole cover slabs, set in CM (1:4) including necessary form work complete all as specified and directed.

S&F 10mm dia and over deformed/TMT treinforcement, cut to length, bent to shape etc as required including binding with MS wire annealed not less than 0.90m dia complete all as specified and directed.

Description all as per srl item No. 43 here in before but 6 to 8 mm dia TMT bar complete all as specified and directed.

Description all as per srl item No. 43 here in before but 8mm dia TMT bars as in stirrups complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I with and including Ball brass valves, high pressure, with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore complete all as specified and directed.

M&L for preparing new surface of steel any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F vitreous china wash basin white flat back of size (550 x 400)mm including CI brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F 40mm low density polyethylene (LDPE) pipes complete all as specified and as directed.

S&F pillar cock 15mm dia CP fancy type complete all as specified and as directed.

S&F 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass complete all as specified and as directed.

S & F 3mm thick sheet glass, figured glaas, pin headed in square n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 15mm thick screed in CM (1:6) on brick or concrete surfaces for fixing of tiles as in floor complete all as specified and as directed.

S&F non skid ceramic colour tiles of size (300 x 300)mm x 7-8 mm thick as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F glazed ceramic colour tiles of size (300x200)mm x 7mm thick, as in dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 150mm bore, laid to slope including packing under and hanuching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and as directed. Note:- Excavation/earth work and concrete bed shall be measured and paid for separately.

M&L for PCC (1:2:4) type B-O, (using 12.5mm graded stone aggregate) as in manholes floors etc and to be finished even and smooth with uing extra cement complete all as specifed and as directed.

M&L for 10mm thick rendering in CM (1:4) on brick or concrete surfaces for fixing of tiles as in dado/skirting complete all as specified and as directed.

S&F stop valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

M&L for reinforced cement concrete (1:1½:3) (using 20mm graded aggregates) as in foundations, including rafts, footings, plinth beams etc complete all as specified and as directed.

Description all as per srl item No 64 above but in columns, pillars complete all as specified and as directed.

Description all as per srl item No 64 here in before but as in beams complete all as specified and as directed.

Description all as per srl item No 64 here in before but in floor/roof slab complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beam, and similar work, vertical or batter work fair finished flat surface of concrete complete all as specified and as directed.

Description all as per srl item No 68 here in before but as in columns/post complete all as specified and as directed.

Description all as per srl item No 68 here in before but in sides and soffits of beams complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slab, etc flat not exceeding 200mm thick, fair finished surface complete all as specified and as directed.

Formwork to edges of concrete flats, treads, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls etc for fair finished complete all as specified and directed.

M&L for forming construction joints (30 mm deep x 10 mm wide), filled with sealing compound (1 part of bitument and 3 part of sand) complete all as specified and as directed.

M&L forming square grooves in plaster n.exc 12mm deep and n exc 15mm on face complete all as specified and as directed.

M&L for roof treatment for non approachable roof:- (i) Rendering 10mm thick in cement mortar (1:3) mixed with liquid water proofing compound finished the surface fair and even (ii) Applying evenly a coat of bitumen primer @0.30kg/Sqm (iii) Applying APP modified polymeric membrane over the bitumen coat surface weight not less than 3.20-3.50Kg/Sqm and over lap 100mm and sealed by torch application as per manufactures instructions (iv) Applying a coat of alumunium paint @200gm/sqm in two coats over polymeric membrane.

M&L for point wiring with 2x1.5 Sqmm single core PVC insulated unsheathed copper multi stranded conductor (Phase-Red Colour and Neutral- Black Colour) in and including concealed PVC conduit of size 20mm for incomer circuit and 25 mm for out going circuit marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3mm thick sheet cover of suitable size complete including PVC insulated stranded copper conductor 1.5 Sqmm as earth wire (green colour) to common earth dolly for connection to ceiling rose to earth terminal including cutting chasses and making good distrubed surface to match with existing finish with plaster for One light/Fan point controlled by one one way switch complete all as specified and as directed.

Description all as per ser item No.76 here-in-before but for one 3 pin socket outlet 5 Amps on the same board complete all as specified and as directed.

Description all as per ser item No. 76 here-in-before but for point wiring with 2.5 Sqmm for 15 Amp socket out let with 2.5 sqmm earth continutiy complete all as specified and as directed.

S&F switch piano type single pole 5 amp 230 v complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 Pin, 5 amp complete all as specified and as directed.

S&F switch piano type single pole 15 amp 230 v complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 Pin, 5 and 15 amp complete all as specified and as directed.

S&F ceiling rose surface type bakelite (65x50) mm three terminals complete all as specified and as directed.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F LED tube light fitting 1x20 watt 230 Volt housing extruded aluminium heat sink, complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surface including fixing material/accessories complete all as specified and as directed.

S&F MCB SP 240 volt 6 to 32 Amps 'C' series 10 KA complete all as specified and directed.

S&F MCB DP 40 Amps 'C' Series 10 KA complete all as specified and directed.

Earthing complete with GI earth plate electrode 60cm x 60cm x 6mm buried directly in ground vertically to depth not less than 2.25mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth wire of size 4.00 mm dia by means of nuts, bolts, check nuts, & washers made out galvanised iron or steel earth wire protected by galvanised iron pipe 20mm bore (medium grade) and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cm x 30cm x 10cm with one handle for lifting made out of 8mm dia MS bar, funnel wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 3 of MES Sch Pt-I all as specified and directed.

M&L for sand filling in cable trenches for cable protection with clean dry sand unwashed incl gently punning, complete all as specified and as directed.

M&L for bricks Sub Class 'B' kiln burnt, well burnt, laid as in trenches/cable cover/protection, complete all as specified and as directed.

Supply, laying in trench/on walls as per site requirement, jointing, testing and commissioning with XLPE insulated, armourred, heavey duty, PVC sheathed electric cable with aluminum conductor, 1100 volts grade connecting to with new cable aluminium lug and cable glands of cross sectional area 16 sqmm 2 core complete all as specified and as directed.

Supply and laying under roads, under culverts along poles light GI pipe of 40mm bore dia cable protection complete all as specified and directed at site.

S&F metallic ventilating air fan single phase 300mm sweep, 900 RPM complete with louver shutter and including making of hole of suitable size fan base after cutting of brick/stone wall complete all as specified and directed.

S&F LED security light/street ligth fitting 35/36 watt with and including suitable size of GI bracket with clamp nut bolts, aluminium pressure die cast housing with touched glass cover (IP 66 protection) luminaire with high power LED as light source complete all as specified and as directed.

Boring of holes under road/hard standing or any other situation by manual mean for passing GI pipe 40mm bore grade and making good both the ends complete all as specified and directed.

Supplying, laying and jointing threading into trenches/wall/roof/floor etc 25 mm bore medium grade GI Steel water tubing including all fittings and accessories complete all as specified and as directed.

S&F Gun-metal glove or gate valves 25 mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M&L for ferrules for tapping from existing water mains, straight plain brass ferrules or connecting screws both ends and fixed 25mm bore GI Pipe complete all as specified and as directed.

Supply and fix LED Lamps 15 w capacity suitable for batten holder complete all as specified and as directed.

M/s Kundu Enterprises

RAMRAS BUILDERS

M/S ABHAY KUMAR AND BROTHERS