SPECIAL REPAIRS TO BLDG No III A AT ORDINANCE STORE AT MRC AND ROOFS SHEETS AND MISC WORK AT BLDG Nos XLVIII XIX XXIV AND T 4 SUPPLY DEPOT ASC UNDER GE WELLINGTON

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and frame work all as specified and directed.

GI frame work for grid of size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturers instructions all as specified and as directed.

Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over one coat of 3mm thick putty including preparation of surfaces complete all as specified and as directed.

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutters (without taking off shutters from frame) all as specified and as directed.

Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 sqm each with shutters (without taking off shutters from frame) all as specified and as directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

35mm thick second class Hard wood made plain, framed, panelled shutters (any No of panels) with veneered particle board medium density, 12mm thick wood partical board with commercial face venners complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified and directed.