CONSTRUCTION OF SUB REGISTRY OFFICE AND REGISTAR RESIDENCE AT RAJAULI, NAWADA FOR YEAR 2025-26

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durability as per direction of Engineer-in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.

Providing Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

08 mm dia Bar

10 mm dia Bar

12 mm dia Bar

16mm dia Bar

20mm dia Bar

25mm dia Bar

Providing Brick work with fly ash bricks in CM(1:6) in foundation and plinth

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand Extra tor Brick work in superstructure above plinth level upto floor V cum

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand Extra tor Brick work in superstructure above plinth level upto floor V cum

Providing and applying white cement based putty of average thickness 2 sqm 46.50 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l,

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 100 mm

Providing designation 100 A flyash brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l

Providing designation 100 A flyash brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/lExcavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead

SIGNAGES flat frame technology of required dimension to form suggested usages/made up of alumnium extruded section duly anodised

Supply and fitting and fixing of 1 HP crompton gravel submersible pump with D.S.P. submersible pump strainer etc.all complete.

Providing and fixing carbon-di-oxide fire extinguishers

Providing and fixing ABC powder type fire extinguishers with capacity 6 kg(IS:15683)

Providing and Supply Executive table with side unit -Table Top size (1800Lx900Dx760H)mm with 50mm table top thick & side runner size (1200Lx400Dx760H) with 35 mm thk. Straight Line table with two wire manager ,mobile pedestal with 3 drawer /center lock ,interchangeble side runner with 3 drawer with lock, one open shelf ,one closed shutter with lock ,key board trey & CPU Trolly . all complete job.The product should be BIFMA ,Green Guard ,AGSI Certified,ISO 14001, ISO 50001:2011 Certified.

Providing and Supply Executive High Back chair with revolving size (seat -510x480,Back -660x510,Height -min. 470mm max. 540mm) chrome plated base with gas height adustment and central tilting with single locking machenaism. Armrest with padding . all complete job.The product should be BIFMA ,Green Guard ,AGSI Certified,ISO 14001, ISO 50001:2011 Certified.

Providing and Supply Reception table with side unit -Table Top size (1500Lx750Dx750H)mm with 25mm table top thick & side runner size (900Lx400Dx750H) with 25 mm thk. Straight Line table with two wire manager ,mobile pedestal with 3 drawer /center lock ,interchangeble side runner with 3 drawer with lock, one open shelf ,one closed shutter with lock ,key board trey & CPU Trolly . all complete job.The product should be BIFMA ,Green Guard ,AGSI Certified,ISO 14001, ISO 50001:2011 Certified.

Providing and Supply Computer Table size (900x600x1050)mm the table top thk will be 25mm PLPB board and top supported with 50x50mm C legs with the provisionlock ,key board trey & CPU Trolly . all complete job.The product should be BIFMA ,Green Guard ,AGSI Certified,ISO 14001, ISO 50001:2011 Certified. all complete job.

Providing and Supply Office chair(C 2) Back chair with revolving size (seat -450x460,Back -530x460,Height -min. 420mm max. 520mm) nylon base with gas height adustment and central tilting with single locking machenaism. with Armrest . all complete job.The product should be BIFMA ,Green Guard ,AGSI Certified,ISO 14001, ISO 50001:2011 Certified.size (all complete job.

Providing and Supply visiting chair (C-3) for waiting room 3 seater visitor chair Length 1775 mm Xd 690mmxH755mm metal perforated sofa option1) seat &back sigal section2) seat is 410mm from ground Perforated stainless steel seat thickness 1.15 mm seat width 52 Beam mild steel with balck power coating thic kness 1.66 mm staineless stel border for every seat & back stainless stell Handles & die pressed legs at the end of chairs gross weight 30 Kgs the steel is of grade 2502

Sloted angle rack (L) 900m x (D) 450 mm x (H) 2 MTS Slotted Angle racks with 7 panels angle: 40 x40 x 2mm Panels:-20 Gauge the product should b e certified company BIFMA ISO 5000, Green Guard/ Green PRO Sedex, AIOTA, IGBC, AGSI, FSC & PEFC

Steel Almirah with 4 Shelves (L) 900mm x (D) 450mm x (H) 1980 mm Storewell with 4 shelves gauge Body 22 Gauge doors 20 Gauge the Product should be Certified Company BIFMA ISO-50001 Green Guard/Green Pro, Sedex, Aiota igbc agsi, fsc &pefc.

Estimate for Provision of E/W & E/I in Proposed Sub-Registry Office and Registrar Residence at Rajauli, (Nawada).

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections etc. As required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As reqd.

Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/submain wiring along with earth wire with the following size of FRLS PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required.

4 X 6 sq. mm + 1 X 6 sq. mm earth wire(light + computer DB)

4 X 10 sq. mm + 1 X 6 sq. mm earth wire(Power +AC DB)

Supplying and fixing stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. As required.

S/F electronic musical call bell suitable for single phase 230 volts complete bell as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required.

Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required .(but without MCB/RCCB/Isolator)

S/F following rating, 240/415 volts, 'C' curve circuit breaket suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as reqd.

Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. (For Non- residential building)

Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying & fixing of following types lamp in the existing electrical fitting/fixtures etc. As reqd.

Supply, Instaiiation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling Fan with BLDC motor, class of insulation: B, 3 nos blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/MM) minimum 6.00, Air delivery minimum 210 cum/min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. Make :- Bajaj/Crompton/Orient/Usha.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

P/F following capacity rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections etc. as required.

Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter- connection copper conductor cable/solid copper strip, switchgears etc.

Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required.

Supplying of copper strip of all sizes for busbar strip/ interconnection including drilling holes etc as reqd. (2 no bus bar for power busbar & light bsbar)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as reqd.

Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required.

Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required.

Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required.

Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal and salt as required.

Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

Supplying and drawing of UTP 4 pair CAT 6A LAN cable, 100 LSZH, yellow colour witSO/IEC 11 801, EN 501, confirming ANSI/TIA, F/UTP speed upto 10 GB in the existing surface/ recessed PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

SITC of 2MP IR Outdoor PTZ Camera - 1/2.8" Progressive Scam CMOS, 1920 X 1080 at 60fps, 4.8 mm to 153 mm, 32XOptical, 16X ditital zoom, color: 0.005 Lux at F1.6, B/W: 0.001 Lux at F1.6, ICR, ONVIF, support H.265, MJPEG, 120 db WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360˚ endless, Tilt: From - 15˚ to 90˚ (auto-flip), Pan Speed - from 0.1˚/s to 160˚/s, Preset Speed: 240˚/s, Tilt Speed - from 0.1˚/s to 120˚/s, Preset Speed: 200˚/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm Output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Region Entrance Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. (HI-PoE Injector under Si Scope, if PoE is used)(Model no DS-2DE7232IW-AE (Camera) + DS-1602ZJ (wall mount Bracket) or DS-1602ZJ-pole (Vertical Pole Mounting Bracket)) (Approved Makes: HIKvision/Honeywell/Bosch)Equivalent

SITC 2 MP IR Bullet Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 x 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF (PROFILE S) , Support H. 265, H 264, MJPEg, DWDR, 3 D Digital Noise Reduction, Three iidividually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics - Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus)

SITC 2 MP IR Indoor Dome Fixed Camera- 1/2.8" Progressive Scan CMOS, 1920 x 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR ICR, ONVIF Support H. 265, H 264, MJPEG, DWDR, 3 D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics - Line crossing detection, Intrusion detection, Motion detection, Video tampering UL, CE, FCC certified (Approved Makes: Hikvision/Honeywell/CP Plus)

SITC of 43 Inches Commercial Display (Approved Makes: LG /Samsung/Panasonic) /Equipment

SITC of 16 ch Network Video Racoraer Communication OS, Up to 12 Megapixels Resolution , Two independent HDMI outputs, one HDMI output of 4K resolution , 1VGA output with output upto 1920 x 1080, Support H.265, MIPEG , Support N+1 hot space system , Support Dual Power - Redundant, Incoming Bandwidth 320 Mbps, 4 SATA Hard Disk, ANR Technology, 4 SATA interface for 4 HDDs and capacity of each HDD upto 4TB, 3 x USB at least 1 x USB with 3.0, Alarm I/O 16/4, RS-485, RS- 232,2 RJ-45 10/100/1000 Mbps self - adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL cerfiied, (Approved Make:-

SITC of 4TB Surveillance Hard Disk(Approved Makes:

SITC of 08 port Unmanaged Giga Network PoE Switch : 08 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at , PoE port, Uplink ports (Approved Makes:

SITC of Network Rack 12U with Standard accessries (Approved Makes:

Supply, Installation, Testing and Commissioning of CAT 6 UTP cable 23 AWG solid copper conductor for Connectivity of Hub room to End Point. (Approved Makes:

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mana/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/Gl structure of suitable strength with following components complete as required:a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.b) Power Conditioning Unit (PCU) of 350- 800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection.f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.

Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call Each boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover complete with all connections etc, as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line. matching transformer etc. complete as required

station in surface/recess suitable for operation on simplex mode. complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable. Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections etc. As required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As reqd.

Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/submain wiring along with earth wire with the following size of FRLS PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. As required.

Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required.

Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

S/F following rating, 240/415 volts, 'C' curve circuit breaket suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as reqd.

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required.

Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

Supplying & fixing of following types lamp in the existing electrical fitting/fixtures etc. As reqd.

Supply, Instaiiation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling Fan with BLDC motor, class of insulation: B, 3 nos blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/MM) minimum 6.00, Air delivery minimum 210 cum/min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. Make :- Bajaj/Crompton/Orient/Usha.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required.

Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.

Providing and fixing following capacity double pole/ four pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required.

Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as reqd.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required.

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mana/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/Gl structure of suitable strength with following components complete as required:a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.b) Power Conditioning Unit (PCU) of 350- 800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection.f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.

Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call Each boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover complete with all connections etc, as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line. matching transformer etc. complete as required

station in surface/recess suitable for operation on simplex mode. complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable. Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

SPLIT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to 50 deg. C & heating within 0 deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. 0utdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost.

Supply installation testing and commissioning of Atomatic Voltage Stabilizer of Capacity 4 KVA, input voltage -130V± 10% and output-220 V ± 10% of Capacity & input Range 130V to 280V Model (For 1.5 Ton AC)

Supply and fixing of 20/24'' ready made M.S. prepainted wall stand structure suitable for 1.5/2.0 TR split AC Machine including all accessories.

Refrigerant:- Supply and additional refrigerant charge of refrigerant R410/410A & equivalent Eco friendly green gas to compensate the additional piping done at site for all systems including testing commissioning as required.

Drain piping :- Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification.

Copper piping: - Supply, installation, testing and commissioning of interconnecting copper refrigerant pipe work (19mm/13mm thick) duly insulated with elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. And exposed piping should be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as per specification.

Control cable: - Supply and laying, testing & commissioning of following sizes of copper conductor control cables on existing tray including fixing clamps & proper connections to equipment etc. complete as required.

Part C

total