Electrical Works

Amount

fo|qr uxjh; forj.k e.My&f}rh;] xkft;kckn ds vUrxZr fo|qr uxjh; forj.k [k.M&f}rh;] xkft;kckn dk;Z{ks= esa fctusl Iyku 2024&25 ¼ikVZ&2½ en esa 11@0-4 dsoh midsUnzksa dk fuekZ.k o {kerko`f)] 33 ds0oh0 ykbZu dk lqn`<+hdj.k] 33@11 ds0oh0 midsUnzksa dk lqn`<+hdj.k ,oa izksVsD’ku lEcU/kh dk;Z bZ&fufonk }kjk okg~; ,tsUlh ds ek/;e ls djkus gsrqA

Construction of plinth of size 2MX2MX1.5M above ground level and one ft. below the ground level of 9”. After excavation of 4” earth, brick ballast shall be provided and rammering will be done properly after that a retaining wall of 9” width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled upto one ft. below the top of the plinth. After this brick ballast shall be provided upto 6” from the earth level and froper rammering shall be done. One no. jaal of 12mm MS Tor shall be fixed in the hollow of the plinth and one ft. thick RCC in 1:2:4 ratio of cement , sand and stone ballast shall be laid on the top of the plinth. The 12mm thick plastering shall be done all around the plinth in ratio 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of supervising Engineer. It includes the cost of labour, T&P, carrier etc. required for proper completion of the work (This material will be provided by the Contactor).

Fabrication of wire mesh fencing frames of different size fabricate out of MS angle iron of size 3x3x2M. Each frame duly welded and fixing with wire mesh of size 25x25x10 SWG hot dipped galvanized within the frame pressed under MS flats of size 40x5mm inside the angle on all four side with help of approx. 20No. Bolts & Nuts of 10mm diameter 45cm legs of frame will be grouted in 1:2:4 cement coarse sand and 20mm gauge stone blast in the size of 0.22x0.22x0.45meter. Each will be painted with one coat of red oxide and two coat of Alluminium paint of approved mark after proper cleaning. Fixing of wire mess fencing around on plinth of T/F with wire gauge 25x25mm, MS Angle 35x35x5mm with gate.

Safe Carriage of ST Pole 11 Meter Long from PVVNL Store Sahibabad/Ghaziabad/Noida to site of work including loading & unloading at both side.

Safe Carriage of ST Pole 13 Meter Long from PVVNL Store Sahibabad/Ghaziabad/Noida to site of work including loading & unloading at both side.

Safe Carriage of PCC Pole 8.5 Meter Long from PVVNL Store Sahibabad/Ghaziabad/Noida to site of work including loading & unloading at both side.

Safe Carriage of 250 KVA Transformer from PVVNL Store Sahibabad/Ghaziabad/Noida to site of work including loading & unloading at both side.

Safe Carriage of LT ABC (3x95+1x70+1x16) Sq.mm. from PVVNL Store Sahibabad/ Ghaziabad/ Noida to site of work including loading & unloading at both side.

Safe Carriage of ACSR Dog Conductor from PVVNL Store Sahibabad/ Ghaziabad/ Noida to site of work including loading & unloading at both side.

Safe Carriage of 36 No. 11 KV Composite Polymeric Pin Insulator, 36 No. 11 KV Composite Polymeric Disc Insulator, 39 No. 33 KV Polymeric Pin Insulator, 24 No. 33 KV Disc Insulator with fittings (70KN), 24 No. Distributuion Box 3 Phase AND 36 No. 11 KV Disc fitting 45KN (T&C) from PVVNL Store Sahibabad/ Ghaziabad/ Noida to site of work including loading & unloading at both side.

Safe Carriage of 300 Meter. XLPE Aluminium Cable 1x240 sqmm, 14 No. Earth Rod (2540x20mm) and 04 No. VCB Outgoing from PVVNL Store Sahibabad/ Ghaziabad/ Noida to site of work including loading & unloading at both side.

Erection, Grouting & Installation of 11 Meter STP Single Pole Structure including all the accessories to be mounted on pole and proper completion of work as per requirement of site.

Erection, Grouting & Installation of 13 Meter STP Single Pole Structure including all the accessories to be mounted on pole and proper completion of work as per requirement of site.

Erection, Grouting Installation of 8.5 Meter PCC Single Pole Structure including all the accessories to be mounted on pole and proper completion of work as per requirement of site.

Normal Laying of LT ABC (3x95+1x70+1x16) Sq.mm. Proper completion of work as per requirement of site and as per RESPO Norms.

Dismantling of Damaged Conductor. Proper completion of work as per requirement of site and as per RESPO Norms.

Installation of 250 KVA Transformer. Complete work as per requirement of site & as per RESPO norms.

Fixing of Distributuion Box 3 Phase. Complete work as per requirement of site.

Work of Chemical Earthing by providing all the required material for completion of work. Complete the work as per RESPO norms.

Concreting of Poles as per RESPO Norms.

Earthing of Pole by providing Earth Rod (2540x20mm) as per RESPO norms.

PROVIDING AND FIXING M.S. Channel 100x50 mm.

PROVIDING AND FIXING Danger board with clamp 11 KV

PROVINDING AND FIXING D.O. Fuse Set 11 KV

PROVINDING AND FIXING No. Plat with clamp

PROVINDING AND FIXING Cross Arm 33 KV 10X50X6 mm

PROVINDING AND FIXING Crimping Al. Lug 240 sq.mm.

PROVINDING AND FIXING Crimping Al. Lug 400 sq.mm.

PROVINDING AND FIXING Nutt & Bolts

PROVINDING AND FIXING Suspension Clamp with Eye-Hook

PROVINDING AND FIXING Dead End Clamp with Eye-Hook

PROVINDING AND FIXING LT Insulating Clamps 120 sq.mm.

PROVINDING AND FIXING G.I. wire 6 SWG

PROVINDING AND FIXING G.I. wire 4mm 8 SWG

PROVINDING AND FIXING Cross Arm Holding Clamp

Carriage of Old & Used 100 KVA Transformer from site to PVVNL Store Sahibabad/Ghaziabad/Noida including loading & unloading at both side.

Yash Contractor (BID ID -4888962)