CERTAIN PETTY REPAIR OF B R NATURE, WELCOME MAINTENANCE TO OFFICER S MD ACCN AND REPAIRS TO PLUMBING, TOILETS SUNKEN FLOORS ETC AT DAMANA UNDER GE JAMMU

Amount

Preparation of old plastered surfaces by scraping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of white wash on walls complete all as specified and as directed.

Preparation of old plastered surfaces by scrapping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying two coat of white wash on walls complete all as specified and as directed.

Preparation of old plastered surfaces by scraping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of white wash on ceilling complete all as specified and as directed.

Preparation of old plastered surfaces by scraping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of oil bound destemper as on ceilling complete all as specified and as directed.

Preparation of old plastered surfaces by scraping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying one coat of oil bound destemper on wall complete all as specified and as directed.

Preparation of old plastered surfaces by scraping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying two coat of oil bound destemper over a coat of wall putty as on wall complete all as specified and as directed.

Preparation of old steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old plastered surfaces by scraping down smoke dust,mould,moss and efflorescent salt and removing oily and greassy spots etc and applying two coat of plastic emulsion paint over a coat of wall putty as on wall complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and diirected.

Rendering 15mm thick in cement mortar 1:6 (in patches) on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on concrete surface in CM 1:3 as in ceiling,chajja,shelves cornics including PCC 1:2:4 as in benching etc finished even & smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceilling complete all as specified and directed.

Preparation of new plastered surfaces and applying two coat of weather proof paint over a coat of wall putty complete all as specified and directed by Engr-in-charge.

M&L for two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engr-in-charge.

Taking down and Refixing of shutters in same opening of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Glazed ceramic coloured tiles, (Premier quality), of size 350 x 250 x 7mm/ 450 x 350 x 7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendring in CM 1:4 all as specified & directed. Note : Design, shape and pattern of fixing of tiles shall be as directed by Engr-in-Charge.

M&L for colored non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc of tiles, over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 all as specified and as directed at site.

M&L for colored non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc of tiles, over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 all as specified and as directed at site.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) light shade polished, area of each tiles n exc 0.36 sqm in floors etc set and jointed in neat cement slurry over 15mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) light shade polished, area of each tiles n exc 0.36 sqm on skirting, dado set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over 10mm thick screed in CM 1:6 all as specified and as directed.

M&L for granite of any type 12 to 15mm thick of size as approved by GE, machine cut bedded jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick in cement screed bedding layer in CM 1:4 including cutting grinding and polishing to granite stone and removal of floor finishes complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area all as specified and directed by Engr-in-Charge.

M&L for PCC (1:2:4) type B0, (using 12.5mm thick stone agg)mixed with liquid water proofing compound and laid on RCC sunken Slab as base layer for receiving top layer all as specified and as directed by Engineer in charge.

Supply only Liquid water proofing compound all as specified and as directed.

M&L preparation of surface, the surface must be sound & free from dirt, dust & loose particles. Thoroughly wire brush the surface & clean the dust, wash the surface with water. Any damage surface must be repaired by using polymer modified repair mortar with Dr. Fixit Pidicrete URP. Clean the surface, saturated with water and remove the excess water if any and bring to touch dry state. Applying the first coat of mixed (@ 0.75 sqm/kg, 1mm thick for 2 coats) Dr Fixit Pidifin 2K on the prepared surface & allow to dry for 4 to 6 hours. Prepare another batch of Dr Fixit Pidifin 2K and apply 2nd coat in direction 90 degree to first coat. Overlay proctected screed, using cement sand 1:3 along with Dr Fixit LW+ complete all as specified and as directed.

S & F in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall all as specified and as directed.

S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall all as specified and as directed.

S&F in repairs WC Orissa pattern white with integral foot rest 580x440 mm including PCC bedding in 1:2:4 and making good disturbed floor portion including connecting to drain /outgoing pipe and to flushing pipe complete all as specified and directed.

S&F PVC (SWR) P trap 110/110mm bore all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete as specified and as directed by Engineer-in-Charge.

S&F in repair vitreous china wash hand basin white flat back end of size 550 x 400mm including brackets, cutting for and pinning in ends for brackets errecting stand complete including brass CP waste coupling and PVC 32mm bore waste pipe with chain and plug and porcelain stopper all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen with plugs washers or waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx100mm including waste pipe etc complete all as specified and as directed.

S&F stainless Steel plate rack made out of 1mm thick sheet of size 750x600x250mm of size having partition as per sample kept in AGE B/R office and fixed with steel fasterners or steel screwed complete all as specified and directed.

S&F toilet paper holder box type complete all as specified and as directed.

Dismantling plain or corrugated AC sheet in roof covering complete all as specified and as directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets fixed with ‘J’ type or ‘L’ type cranked hooks bolts with bitumen washer complete all as specified and directed.

All as per Ser Item No 39.00 above but except sheet all as specified and as directed.

S&F 6mm thick asbestos cement one piece plan angular ridge fixed with L or J type or cranked hook bolt complete all as specified and directed.

All as per Ser Item No 41 above but except ridge complete all as specified and directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.

S&F 4mm thick of size 605X605 mm ,White pre-premiered, self embossed, Reinforced Designer Board for false ceiling Conforming to IS-14862 and ISO-8336:1993. As per specification under mention: (i)GI section frame work (POWDER COATED) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web)X 24mm flange .33mm thick powdered coated main tee 38(Web) X24mm flange 0.33mm thick. wall angle screwed fixed to brick wall/partition wall/concrete/RCC with the help of nylon sleeves and screws @ 610 mm C/C , Then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions. Suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge.

M&L for prelaminated partical board 18/19mm thick ,interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work fixed in repair complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls and ceilling or laid in floor all as specified and as directed.

All as per item No. 46 above but except tubing all as specified and as directed.

Taking up or down steel tubing 15mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and as directed.

S&F chromium plated doom 125mm dia with waste hole (minimum weight 40gms) all as specified and as directed.

S&F Hand Shower (Health Faucet) (ABS Body) with 1mtr long PVC Tube and wall Hook fixed to wall with and including CP Brass screws etc complete all as specified and as directed.

Dismantling PVC water tank/demolition of RCC water storage tanks of capacity upto 1000 ltrs and removing from site all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank including, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs including making connections,20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe anf fixed (min wt210 gram) complete all as specified in SSR Part I all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames ) not exc 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish(without any extra cost to Govt), & removing from site all as specified and directed by Engr-in-charge.

All as per item 54 above but exc 1.5 sqm and not exc 4 sqm each all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

M&L Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & including PCC 1:3:6 type CO in back filling of chowkats & tarring back of chowkats and holdfasts all as specified and as directed.

As per ser item No 57 above but frame size125x60mm all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as specified and as directed.

S&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails Mild steel frame shall be coverred with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail. lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement suppling and fixing in the frame at site as per specification clause No 8B.1 to 8 B.10 and drawing on page No 156 of MES SSR-2010 Part-II all as specified and as directed.

S&F 2nd class hard wood, plain framed, panelled shutters(two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated 35mm thick complete, all as specified and directed by Engr-in Charge.

S&F 2nd class hard wood, glazed and skelton shutter 35mm thick open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats, all as specified and as directed.

S&F steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm single rebated comprises glazed Skelton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 all as specified and as directed.

S&F steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm single rebated comprises wire gauged Skelton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos of FI section complete welded to frame for holding wire mesh with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 all as specified and as directed.

S&F Framed work such as grills,gratings etc with ends of bars shouldered and/or riveted or forged into spikes,framed guard bars ,barred iron doors,ladders ,framed balusters,walk ways,railing,frame work of water tanks, Cupboard frame etc (including cutting holes in brick masonery walls and fixed with PCC 1:11/2:3) and similar work confirming to Fe.290.Gde-E-165 all as specified and as directed.

M&L applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including prepartion of new surface over 10cm width or girth all as specified and as directed.

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface all as specified and directed.

Supply and fixing GI tubing 20 mm bore medium grade including all necessary fittings laid in floors or fixed in walls or ceilings complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connection, including cleaning for refixing or removal of unserviceable pipe to store complete all as specified and as directed.

S&F ball valves high pressure of PTMT with appoxy coated alluminium rod and high density plastic ball screwed for iron pipe 15mm bore fixed in repair all as specified minimum weight 210gms all as specified and as directed.

S&F ball valves high pressure of PTMT with appoxy coated alluminium rod and high density plastic ball screwed for iron pipe 20mm bore fixed in repair all as specified minimum weight 210gms all as specified and as directed.

Supplying and fixing in repairs Bib taps, cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supplying and fixing in repairs Bib taps, cast copper alloy fancy type chromium plated ( long body) with crutch or butterfly handle,screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supplying and fixing in repairs Stop cock, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete, all as specified and as directed.

Supplying and fixing in repairs Stop cock, chromium plated fancy type cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 20mm dia bore complete, all as specified and as directed.

Supplying and fixing in repairs Stop cock, chromium plated fancy type with long shank and cup ( concealed type ) cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete, all as specified incl cutting walls /tile and making good the diturbed surface complete all as specified and directed.

Supplying and fixing in repairs chromium plated angular stop cock, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete, all as specified and as directed.

Supplying and fixing in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,of size 15mm dia bore complete, all as specified and as directed.

Supplying and fixing in repairs Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms) of 15mm dia bore including necessary fittings complete, all as specified and as directed.

Material and Labour for Repairing of old chromium plated Bib taps, Pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engr-in-Charge complete, all as specified and as directed at site.

Supply and fixing Waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified and as directed.

Supply and fixing Waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 40mm complete all as specified and as directed.

Supply and fixing Looking mirror of size 600mmx450mm with PVC moulded frame and hard board back white colour complete all as specified and as directed.

Supply and fixing PVC connection 15mm bore and 450 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.

Supply and fixing PVC waste pipe 32mm bore complete, all as specified and as directed.

Supply and fixing PVC waste pipe 40mm bore complete, all as specified and as directed.

Material and Labour repairing of PVC low level/high level cistern by changing its internal fitting including PVC flush pipe etc complete all as specified and as directed at site.

Cleaning of water storage tank completely by removing all scale dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint including all Material and Labour of capacity exe 250 ltrs and not exc.500 ltrs including dismantling and refixing if required all as specified and as directed.

Cleaning of water storage tank completely by removing all scale dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint including all Material and Labour of capacity 1000 ltrs including dismantling and refixing if required all as specified and as directed.

Supply and fixing in repairs PVC seat cover for EWC, white colour including brass CP hinges complete all as specified and directed at site.

Supply and fixing in repairs CP brass jet spray with flexible pipe n.less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site.

S&F PVC flushing cistern 10 ltr capacity make should be engraved on the body including flushing pipe Chormium plated 90 cm long, pair of bracket etc complete all as specified and as directed.

Supply and fixing in repairs Tubular towel rail, 20mm dia, D type 60cm long between flanges of brass chromium plated all as specified and as directed.

Supply and fixing in repairs Brass chromium plated shower rose with arm n.less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.

S&F 125 mm dia steel grating fixed in position complete all as specified and as directed.

S&F 125 mm dia steel grating with hole fixed in position complete all as specified and as directed.

S&F Alluminium door stoper 150mm for doors complete all as specified and as directed.

Supply and fixing in repairs Helical door spring of size 300 mm including welding to steel chowkhats, complete all as specified and as directed at site.

S&F Galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exe 0.5 sqm in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from the wooden frames glazing with puttyor fixed with wooden beads complete all as specified and as directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane of thickness 3mm complete all as specified and as directed.

Mild steel sliding bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolt plate and two on staple plate, 250mm long all as specified and as directed.

Mild steel sliding bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolt plate and two on staple plate, 300mm long all as specified and as directed.

S&F in repairs Aluminium anodized, barrel tower bolt of extruded section, 100mm long all as specified and as directed.

S&F in repairs Aluminium anodized, barrel tower bolt of extruded section, 150mm long all as specified and as directed.

S&F in repairs Aluminium anodized, barrel tower bolt of extruded section, 200mm long all as specified and as directed.

S&F in repairs Aluminium handle, cast type, anodized, 150mm size all as specified and as directed.

S&F in repairs Aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 250mm long all as specified and as directed.

S&F in repairs Aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section ,300mm long all as specified and as directed.

S&F Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 75mm size all as specified and as directed.

S&F Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized 100mm size all as specified and as directed.

S&F Floor door seal one mtr long of mild steel body with fiber brushes all as specified and as directed.

S&F 15 mm dia bore in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed.

S&F hasp and staple 150mm long safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screw fixed in repair complete all as specified and as directed.

Jagbir Singh and Co

MADHAV CONSTRUCTION COMPANY

Bidder Name

MADHAV CONSTRUCTION COMPANY

Jagbir Singh and Co

bushan kumar