Construction of Clock tower at Lanka Road Tiniali in ward no-01(Lumding Town) Under 14th FC (1st and 2nd installment) for the year 2019-20

Amount

EARTH WORK

2.8.1>Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches… All kinds of soil

CE(B) Approved Analysis>FLAT BRICK SOILING Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. …

2.25>Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

4.1.5>PLAIN CEMENT CONCRETE WORKS Providing and laying in position cement concrete of specified grade…. 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1>Foundations, footings, bases of columns, etc. for mass concrete

5.9.5>Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.2>Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

5.9.6>Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3>Suspended floors, roofs, landings, balconies and access platform

5.9.16.1>Edges of slabs and breaks in floors and walls 5.9.16.1 Under 20 cm wide

REINFORCEMENT

5.22.6>Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

5.22A.6>Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

5.1.2>REINFORCED CEMENT CONCRETE WORKS(UP TO PLINTH) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement … 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

5.2.2>REINFORCED CEMENT CONCRETE WORKS(ABOVE PLINTH) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc…… 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.3>REINFORCED CEMENT CONCRETE WORKS(ABOVE PLINTH) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

PLASTERING

13.2.1>CEMENT PLASTERING (In Fine Sand) 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

GRANITE STONE

8.2.3.2>Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required ...... Granite stone slab all colour and texture except black, Cherry/ Ruby red 8.2.3.2 Area of slab over 0.50 sqm

12.2>Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

CLOCK

NSR1>Outdoor GPS Time Clock -5 Feet Clock dial GPS Clock Mechanism Clock Movement- Electro Mechanical movement made with waterproof high precision hard and rust free stainless steel and brass wheel, center shaft, warm wheel center wheel, canon pinion, Hour Wheel, Minute Wheel, Arm Bushes and bearing driven. Clock Hands- Aluminium CLock Hands GPS CLOCK CONTROLLER- With Battery back-up for 48-72 Hours

NSR2>Fitting and fixing of DIGITAL BELL SYSTEM (OPTIONAL FEATURE) Spekaers Bell System Amplifier for 48-72 Hours

ELECTRIFICATION

Internal electrification of total civil works

External electrification of total civil works

EXTERIOR ARCHITECH DESIGN

Ornamental & Relief work of total civil works

ANIMESH MISHRA (BID ID -271804)