SPL REPAIRS TO CERTAIN ROADS AND ROAD FURNITURE AT JALIPA AND JASAI MIL STN UNDER GE (A) BARMER

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400sqm and depth exc 50mm and not exc 100mm and removing all material complete all as specified and directed by Engineer-in-Charge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400sqm and depth not exc 50mm and removing all material complete all as specified and directed by Engineer-in-Charge.

M&L repair to pot holes any depth area not exceeding 1.0sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to atleast 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) making good by applying tack coat VG-10 at 5kg per 10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10sqm, blinded with 0.09cum of stone chippings, 6.3mm sze and again well rammed (including supply of premix macadam, binder and chippings) with 8 to 12 tonne power roller all as directed by Engineer-in-Charge.

M&L for Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc all as specified and directed by Engineer-in-Charge.

M & L for applying evenly priming/tack coat with paving bituminous primer VG-10 @10 kg per 10sqm with mechanical sprayer all as specified and directed by Engineer-in-Charge.

M&L for premixed bituminous macadam mixed in fully automatic hot mix plant with pavement bitumen VG-40 content 4% by weight of total mix laid by mechanical paver and rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) by 8 to 12 Tonne capacity power roller complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing cakeed mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc all as specified and directed by Engineer-in-Charge.

M & L for applying evenly priming/tack coat with paving bituminous primer VG-10 @ 5 kg per 10sqm with mechanical sprayer all as specified and directed by Engineer-in-Charge.

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content of paving bitumen VG-40 by weight of total mix using mechanical paver, rolled and compacted to required camber and gradient by 8 to 10 Tonne capacity power roller complete all as specified and directed by Engineer-in-Charge.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to IP 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers/ fire equipment engineers/ dish steel fab or equivalent approved make.

Supply and fix in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA strip lens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers, fire equipment engineers, dish steel fab or equivalent approved make.

Supply and fix in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make:- Dark eye/ Road Star/ 3M/ SNI/ ace polymers/ fire equipment engineers/ dish steel fab or equivalent approved make.

Dismantling wrought iron or mild steel of any description not otherwise provided for

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed

S&F 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for cement concrete 1:3:6 of type C2 (using 40mm graded stone aggregate) as in filling and mass concrete all as specified and directed.

M&L for applying two coats of synthetic enamel paints on old steel surfaces over a coat of red oxide primer including surface preparation.

Material & Labour for providing and fixing stainless steel (Grade 304) railing (sign board) made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S&F in repair retro reflective sheet on road sign board of any colour as per road standard norms complete all as specified and directed by Engr-in-Charge.

S&F in repair retro reflective sheet writing letter or figures( block, roman, italic or indian) on road sign boards as per road sign board norms.

m/s jogaram sujaram