Replacement of conventional fittings into LED

Amount

Supplying and fixing IP65 rated 20 Watts LED Post top Lantern including all acessories similar to Crompton Model LPTH-20-CDL in the existing pole.

Supplying and fixing 8 Watts LED Bollard fitting with all acessories similar to PHILIPS Model No 15473/30/16 including PCC base and all acessories.

Supplying and fixing 20 Watts LED Post top lantern with acessories similar to C&S CETUS Model No CETUS /20 W in the existing Pole.

Supplying of 7 Watts LED sleek recess fitting with all acessories Similar to PHILIPS SM250C LED7S- 6500 PSU WH.

Supplying of 7 Watts LED Wall fitting with lamp and all acessories Similar to PHILIPS Model No 1738030 PN.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc. as required.

Supplying of following decorative A.C. Ceiling fan with five star, ISI mark and all accessories. Equivalent to ANCHOR STILER PLUS (Make: Bajaj/Usha /Crompton/Anchor etc.)

a) 1200 mm Sweep

Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of following sizes XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: 7098 (Part I) and IS No: 1554 (Part-I) 1988 as applicable.(make :Havells / Polycab/ Finolex. etc as required.

10 Sqmm X 4 core

Supplying and laying of one number double walled corrugated high density polyethlene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS: 14930 PART-I & II Complete with necessary HDPE fittigs for protection of 1.1 KV grade under ground cable directly in ground at a depth of 50 cm i/c excavation and refilling the trench.

40mm outer dia and 32mm inner dia

laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size in the exising DWC/HUME/METAL pipe as required.

a) Upto 35 Sqmm

Supplying and making indoor end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed / XLPE aluminium conductor UG cable of 1.1KV grade as reqd.

A) 3x 10 Sqmm(22 mm)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Providing and fixing pole mounting weather proof cable looping loop out box made out of SMC and of size 170 mm x 170 mm x 105 mm out side and 140 mm x 140 mmx 95 mm inside for providing with hinged door and locking arrangements i/c providing and fixing the following mounting and fixing the box on street light pole with suitable bolt & nuts.

6 A SPMCB (Indoasian / Havells)

63 A rating modular connector 4 way -01 No.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 6 way ,Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

A) Single pole

Supplying and fixing following rating, double poles, 240 volts, isolater in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) 40 Amps

Fabrication, installation, testing and commissioning of L.T outdoor type self supported cubical non extendable type LT Panel board of Suitable size shall be not less then 1500 X 1500 X 400 mm), dust and vermin proof made out of 2 mm thick CRCA sheet with front opening, double leaf hinged door with locking arrangement embedded in PCC 1:2:4 with 04 Nos Aluminium strips of size 50 X 12 X 700 mm fixed with insuators with supplying and fixing i/c making connection / interconnection of heavy duty porceline cutouts of 300 Amps ( 03 Nos) and aluminium lugs of sizes etc. All the cutouts and busbar should be interconnected with Aluminium strips of size 50 X 12 mm. Busbar shall be provided with colour coded rubberized sleeves bands for phases and neutral identification and duly painted with two coats of metal primer and two coats of synthetic enamel etc complete as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 4 way (4+12),Double door

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) 63 Amps

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreader in existing cubicle panel board including drilling holes in cubicle panel, making connections etc as required.

100A,16kA,TPMCCB

125A,16kA,TPMCCB

M/s G K Construction

ICONAGENCIES

DAYAL HALDER

RAVI RAJ ELECTRICALS

A Fakrudeen