Re-Invite-Providing and fixing weld mesh panels 5 ft height powder coated near Gate no.2 MDU Rohtak

Amount

Construction of weld mesh panel(5`) with powder coated fencing and all fittings complete as per entire satisfaction of Engineer-in-charge. Specification:1. Weld mesh panels with fitting accessories: (a). Weld Mesh Panels:(i) Weld mesh panels should be produced by electrical resistance welded galvanized wires and subsequently powder coated as per below spec. (ii) Weld mesh panels for fence will meet the standards of EN 10223-7, EN 10245-1 with the following key specifications apart from the other points in the governing specification: (iii) Panel size: 2500mm x 1500mm . Tolerance of plus /- 2% (iv) Weld shear strength: Minimum 50% of the breaking strength of the smallest wire ( In case of vertical wire) (v) Mesh wire: Galvanized MS wire Horizontal wire, Dia. 5 mm ( plus /- 0.05mm) : Vertical wire, Dia 5 mm ( plus /- 0.05 mm) Tensile Strength of wire : Min 500 N/sq.mm Specification for wire: IS 280 (vi) Galvanizing of wire: 40-50 GSM as per IS 4826 (Measurement as per IS 6745) Uniformity of coating : As per IS 2633 Adhesion test for coating: As per IS 2629 (1985) (vii) Powder coating: The galvanized panels are subsequently single powder coated after welding with a thickness of 60 to 80 microns. (viii) Colour: RAL 6005 Coating Standard : EN 10245-1? IS 13871 (xi) QTY : 400 Panels / KM (b) Omega clamp with Profile cover plate : to be used when fence line is straight (i) Omega clamp is used to fix the mesh on the poles by using suitable fasteners. The profile cover plate provides the necessary holding strength and as such the shape of the cover plate. (ii) Material : MS flat 35 mm Width and 2.5 mm thick, as per IS 1730 (iii) Powder coating : The omega clamps are subsequently single powder coated (iv) Colour : RAL 6005 Coating Standard : EN 10245-1 /IS 13871 (v) QTY : 1203 Clamps/KM (c) Mushroom Head Bolts with security nuts : (i) Each Omega clamp shall be supplied with two sets mushroom headed bolts with security nuts and washers. (ii) Material : SS anti theft (iii) Size : M8 X50 mm (iv) QTY : 2406 nos /KM 2. Fence Post and accessories (a) Fence Post (i) Type : Square Hollow section. (ii) Specifications : IS 1161-2014 (Medium Grade) (iii) Outer Diameter : 60 mm plus /- 2% (iv) Thickness : 2 mm plus /- 10% (medium grade) (v) Length : 1950 mm plus /-2% (vi) Powder Coating : The fence post are subsequently single powder coating (vii) Colour : RAL 6005 Coating Standard : EN 10245-1 /IS 13871 (viii) Qty : 401 Nos /KM (b) Anchor rod for fence post (i) MS rod anchored with fence post at bottom using Tie wire (ii) Material : MS rod (iii) Size : 10 mm dia with 250mm long (iv) Qty : 802 nos / KM Including excavation, cement concrete, painting , loading, unloading, scaffolding and carriage complete as per entire satisfaction of Engineer-in-charge.