8288 REPAIR / REPLACEMENT / MAINT TO PROTECTIVE SYSTEM, CABLE, PANELS, STREET LIGHT, EXT ELECT / INTERNAL ELECT SYSTEM LIGHT FITTINGS CORRODED PIPE LINE VALVE CHAMBERS AND OTHER MISC WKS IN THE DAD QTR AREA AND OTHER CONNECTED AREA UNDER GE S PUNE

Amount

Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for laying cables, foundation for pole etc and getting out in soft/loose soil complete all as directed.

Excavation in trenches not exceeding 1.5 m wide and exc. 1.5 m depth but not exc. 3.0m for laying cables, foundation for pole etc and getting out in soft/loose soil complete all as directed.

Removing excavated material to distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

Returning filling in incl spreading leveling watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Material & labour cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation complete all as specified and directed.

Material & labour PCC 1: 3 : 6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in stays and coping of poles including necessary form work complete all as specified and directed.

Dismantling unserviceable steel poles/struts any size all as specified complete and removing from site complete all as specified and as directed.

Dismantling unserviceable stay assembly complete and removing from site complete all as specified and as directed.

Dismantling cross arms of MS channel or angle sections etc complete and setting aside for reuse within 50M complete all as specified and as directed.

Dismantling unserviceable galvanized earth steel wire 3.15 or 4 mm dia and existing hexagonal cradle guard HT/LT poles and removing binding wire and removal of the same from site complete all as specified and directed.

Dismantling old ACSR conductor any size from over head lines, poles by removing binding wire, service wire, cables and removal from site complete all as specified and directed.

Dismantling insulator any type/ any size from LT poles complete all as directed.

Supply, errecting & fixing in replacement in steel tubular pole swaged ,type 410 SP 55 in true vertical position, pole conforming to IS-1678 of 11Mtr length, at complete as specified & directed.

Supply, errecting & fixing in replacement in steel tubular pole swaged ,type 410 SP 31 in true vertical position, pole conforming to IS-1678 of 9Mtr long, at complete as specified & directed .

Supplying and fixing in replacement galvanized stay stranded wire of size 7/4 mm and fixing to stay assembly complete all as shown in electrical plate No 1 of SSR-2009 (Part-I) complete all as specified and directed.

M & L for GI Stay assembly set comprising of 14 mm dia 400 mm iron stay bow, 2150 mm long stay rod 20 mm dia, stay plate 300 x 300 x 6 mm thick complete with all aceessories as shown in electric plate no 1 of MES schedule Part I complete all as specified and as directed. (Note :- Earth work, PCC, loop type insulator, galvanized stay stranded wire will be measured separately)

Supply & fixing loop type insulator, vitreous porcelain, white brown or green with over all dimensions 90 mm x 140 mm, clearance of hole 25.5 mm suitable for 11000 volts complete all as specified and directed.

Material & labour for Cross Arms bracings supports, clamps, eye hook and back plates fabricated from structural steel sections including pole clamps stay clamps, D clamps nuts, bolts , washers welding bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

Supply and fixing of cradles, hexagonal/Rectangular, fabricated with galvanized steel wire 4 mm dia including stretching, sagging and jointing in position as a continuous earth wire on pole and for guarding complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium conductor steel reinforced (ACSR) of any size for LT OH lines on poles including stringing ,binding with aluminium wire 14 SWG or aluminium tape incl jumpers complete connecting of disconnected cable,service cable and street light connection complete all as specified and directed.

Taking up UG cable of size 16 sqmm 2/4 core to 35sqmm 3.5core from trenches including bricks as required complete all specified and as directed.

Taking up UG cable of size 50 sqmm 3.5 core to 95 sqmm 3.5core from trenches including bricks as required complete all specified and as directed.

Taking up UG cable of size 120 sqmm 3.5 core to 150 sqmm 3.5core from trenches including bricks as required complete all specified and as directed.

Supply and laying XLPE Insulated armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core complete all as directed

All as per Sch 'A' item No. 24 here in above but size 16 sqmm 2 Core complete all as specified and as directed.

All as per Sch 'A' item No.24 here in above but size 16 sqmm 4 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 25 sqmm 4 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 35 sqmm 3.5 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 50 sqmm 3.5 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 70 sqmm 3.5 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 95 sqmm 3.5 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 120 sqmm 3.5 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 150 sqmm 3.5 Core complete all as specified and as directed.

All as per Sch 'A' item No. 24 here in above but size 185 sqmm 3.5 Core complete all as specified and as directed.

Material and labour for sand cushioning with crushed stone sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as directed.

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified and as directed.

Supply and fixing in replacement of GI Pipe , light grade 40 mm bore , confirming to IS-1239, for cable protection on poles/ walls/ Road crossing/ floor crossing complete all as specified and as directed.

All as per item No. 37.00 here in above but 50mm bore complete all as specified and as directed.

All as per item No. 37.00 here in above but size 80mm bore complete all as specified and as directed.

M&L for straight through (Heat shrinkable) suitable for LT UG cable 1.1 KV including cable connection on pole complete of following sizes :- (Make: M-seal/Dension or equiavalent Make)

16 to 35 Sqmm 3 1/2 Core

50 to 95 Sqmm 3 1/2 Core

120 to 185 Sqmm 3 1/2 Core

M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm, 2 nos half round (for bottom and top) shall be leveling complete all as specified and directed.

S&F LED street light fitting 35W 230V AC outdoor type with high pressure die cast aluninium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

All as per Sl. Item No. 42.00 above but 60 Watt complete all as specified and as directed.

All as per Sl. Item No. 42.00 above but 70 Watt complete all as specified and as directed.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down from MCB DB / Main switch, old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note :- Making good of disturbed surfaces will be done by contractor without any claims.)

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

One light point controlled by two 2 way switches with cable 1.5 sqmm

All as per Sl. Item No. 47.00 above but with 4.0sqmm PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked for 15 A switch socket on independent board complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC insulated copper conductor FRLS cable 1100 Volts grade complete with & including PVC casing and caping and accessories with PVC ISI marked switch board, including continuous PVC insulated copper earth wire 1.5 Sqmm connected to common earth dolly, for the following :-

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

One light point controlled by two 2 way switches with cable 1.5 sqmm

All as per Sl. Item No. 49.00 above but with 4.0sqmm PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked for 15 A switch socket on independent board complete all as specified and as directed.

S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.

S&F bell push,flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F bell electrical ding dong including hard\wood board bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals,240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole,240 volts complete all as specified and as directed.

S&F piano type switch 5 amps two way,240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. complete all as specified and as directed.

S&F in repairs of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution.CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivelent in Havells/HPL/Philips

M & L for submain wiring complete with two single core 4Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, in existing conduit, including continuous PVC insulated copper earth wire 4.0 Sqmm complete all as specified and as directed.

All as per Sl. Item No. 62.00 above but with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts,including continuous PVC insulated copper earth wire 6 Sqmm complete all as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4.0 sqmm in and including PVC casing caping complete all as specified and as directed.

All as per Sl. Item No. 64.00 above but with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts,including continuous PVC insulated copper earth wire 6 Sqmm complete all as specified and as directed.

M & L for Sub main wiring complete with four single core 6 sqmm ,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with two continuous copper earth conductor of 4 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge (Note :- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 4 runs of 6 Sqmm conductor and two run of 4 Sqmm earth wire shall be measured as one unit length.)

M&L for cutting chases, pinning in making good to facing where required and poinitng in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10 cm girth all as specified and directed by engineer in charge (Note : Making good of disturbed surfaces will be done by the contractor without any claims)

S&F MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted all as directed and specified.

S&F MCB DB SPN 8 way, double door, with 200 amp rated busbar 240 V,recess mounted all as specified and directed by engineer in charge.

S&F vertical 4 way TPN double door,recess mounted/wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory all as specified and directed

S&F MCB DB SPN 4 way double door with 200 amp rated busbar, 240V recess mounted with common earth dolly all as directed and specified by engineer in charge.

S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and as directed. (Note :- GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supplying and fixing in repairs LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution conforming to CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivelent in Havells/HPL/Philips complete all as specified and as directed.

Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro Phillips / Havells all as specified here-in-after including taking down old fitting.

Taking down fans,removing to workshop for servicing, cleaning, lubricating, spray painting one coat with synthetic enamel paint, writing MES No., replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations complete all as specified and as directed. (Note:- Spares like Capacitor, bearing, terminal connector, gun metal bush, PVC cable shall be measured and paid seperately as supply only)

Ceiling fans of any size

Exhaust fan of any size

Supply only the following spare parts :-

Capacitor 2.5mfd 230 volts Make - Asian or equivalent

Capacitor 4mfd 230 volts Make - Asian or equivalent

SKF bearing 6200 to 6203 ZZ Make - SKF or equivalent

Terminal conductor 3 way Bakelite

Self adhesive PVC electrical Insulation tape 7 mtr long, ISI Mark with superior quality.

Supply only PVC three core sheathed cable with stranded copper conductor of size 1.5 sqmm complete all as specified and as directed.

Supply only brass gun metal bushing suitable of size 1200/1400mm sweep ceiling fan complete all as specified and as directed,

Supply and Fix in replacement canopy for ceiling fans(Set of two) complete all as specified and as directed,

Supply and Fix in replacement MS clamp with rubber reel,nuts,bolts,split pin etc suitable for 1200/1400 mm swwep ceiling fan complete all as specified and as directed.

M&L for replacement of burnt winding of fans, rewinding complete with super enamelled copper wire of same guage and weight, replacement of insulation paper, varnishing, heating up and testing complete including refixing the fan at positions to the satisfaction of Engr-in-charge for the following :-

Ceiling fan 1200/1400mm sweep

Exhaust fan upto 300mm sweep

Wall mounting fan of any size,working on 230 volts AC supply

S&F in replacement down rod of size 2 ft long made out of GI pipe medium grade 15mm dia with fan clamps incl drilling cutting threading etc all as directed for ceiling fan 1200/1400 sweep complete all as specified and as directed.

S&F in replacement of burnt out and unsv fan motor assembly complete incl double bearing,copper winding with metal plate top & bottom side suitable for usha or any other existing make at any location complete all as specified and directed

M&L for replacement of fan blades suitable for 1200 mm Sweep fans as per sample all as specified and directed.

S&F in replacement of sleek LED Cadila mirror light fitting complete in all respect having high output diffuser of 2 feet length,9 W LED.Cat Part No HLPLEDCAD09CW of HPL or of equivalent in Havells/Philips/Wipro Fortune Art make specified here- in - after.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 100mmx100mm and 50mm deep complete all as specified and as directed. (Note :- Making good of disturbed surfaces will be done by contractor without any claims.)

All as per Sl. Item No. 90.00 above but 175x100x50 mm deep complete all as specified and as directed.

All as per Sl. Item No. 90.00 above but 200x150x50 mm deep complete all as specified and as directed.

All as per Sl. Item No. 90.00 above but 250x200x50 mm deep complete all as specified and as directed.

All as per Sl. Item No. 90.00 above but 350x300x50 mm deep complete all as specified and as directed.

M&L for replacement of ventilating fan 250mm, 230V fixed in position all as specified and directed

Taking up or down carefully steel water tubing/PP-R pipes and connection from trenches, wall & floor including cleaning of serviceable pipes for refixing of size 20 mm bore complete all as specified and as directed.

Taking up or down carefully steel water tubing/PP-R pipes and connection from trenches, wall & floor including cleaning of serviceable pipes for refixing of size 25 mm bore complete all as specified and as directed.

Taking up or down carefully steel water tubing/PP-R pipes and connection from trenches, wall & floor including cleaning of serviceable pipes for refixing of size 40 mm bore complete all as specified and as directed.

Taking up or down carefully steel water tubing/PP-R pipes and connection from trenches, wall & floor including cleaning of serviceable pipes for refixing of size 50 mm bore complete all as specified and as directed.

Taking up or down carefully steel water tubing and connection including from trenches, wall & floor cleaning of serviceable pipes for refixing of size 80 mm bore complete all as specified and as directed.

Taking up or down carefully steel water tubing and connection including from trenches, wall & floor cleaning for refixing of size 100 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 20 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 25 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 40 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 50 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 80 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 100 mm bore complete all as specified and as directed.

Supply and fix complete to walls / ceilings or laid in floors steel water tubing galvanised medium grade with all fittings of sizes 20 mm size complete all as specified and as directed.

Supply and fix complete to walls / ceilings or laid in floors steel water tubing galvanised medium grade with all fittings of sizes 25 mm size complete all as specified and as directed.

Supply and fix complete to walls / ceilings or laid in floors steel water tubing galvanised medium grade with all fittings of sizes 40 mm size complete all as specified and as directed.

Supply and fix complete to walls / ceilings or laid in floors steel water tubing galvanised medium grade with all fittings of sizes 50 mm size complete all as specified and as directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 20 mm bore complete all as specified & directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 25 mm bore complete all as specified & directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 40 mm bore complete all as specified & directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 50 mm bore complete all as specified & directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 80 mm bore complete all as specified & directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 100 mm bore complete all as specified & directed.

M&L for disconnecting, taking out under ground LT cable of length not more than 3 m and of size 10 sqmm to 25 sqmm including excavation, taking out bricks and relaying the old cable in loop and making connection with proper new thimbles in cut out boxes,Feeder pillar boxes, MCBs ,junction boxes etc including refilling of sand, relaying old bricks and returning, filling in soil complete all as specified and as directed

S&F Spreader terminals suitable for end connections of MCCB 3Pole upto 100A (set of 6) complete all as specified and as directed.

S&F Spreader terminals suitable for MCCB 4 Pole upto 100A (set of 8 ) complete all as specified and as directed.

Disconnecting and taking down HT UG cable from HT pole/ Transformer and cutting faulty end portion of the cable, dressing properly and making good end termination, out door type with and including suitable size of cold shrinkable new jointing kit 22KV grade and aluminium lugs duly crimped with crimping tool for the cable size of HT 120sqmm to 185 sqmm XLPE cable complete all as specified and as directed.

Disconnecting and taking down HT UG cable from HT pole/ Transformer and cutting faulty end portion of the cable, dressing properly and making straight through joint, out door type with and including suitable size of cold shrinkable new jointing kit 22KV grade and aluminium lugs duly crimped with crimping tool for the cable size of HT 120 sqmm to 150 sqmm XLPE cable complete all as specified and as directed.

Disconnecting and taking down HT UG cable from HT pole/ Transformer and cutting faulty end portion of the cable, dressing properly and making good straight through joint out door type with and including suitable size of cold shrinkable new jointing kit 22KV grade and aluminium lugs duly crimped with crimping tool for the cable size of HT 185 sqmm XLPE cable complete all as specified and as directed.

M&L for new transformer oil as per IS:335 reqd for topping in various transformers all as specified and directed.

M&L Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to GI strip 32mmx6mmdia GI wire upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Testing and fault locating of HT underground cable with the help of cable fault locating machine at site including removal of moisture content from cable complete all as specified and as directed. (Note:- The machine for locating of fault will be arranged by the contractor .The quoted rate is included for the fault locating machine. Necessary excavation, earthwork etc measured and paid separately under Sch 'A').

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

S&F in repairs bell electrical ding dong 5 amp, 240 volts complete all as specified and as directed.

S&F in repairs ceiling rose surface type three terminals, 240 volts complete all as specified and as directed.

S&F in repairs socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F in repairs socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F in repairs piano type switch 15 amps single pole, 240volts complete all as specified and as directed.

S&F in repairs lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. complete all as specified and as directed.

S&F in repairs of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.

S&F in repairs MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted complete all as directed and specified.

S&F in repairs MCB DB SPN 8 way, double door, with 200 amp rated busbar 240 V,recess mounted all as specified and directed.

S&F in repairs vertical 4 way TPN double door,recess mounted/wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory all as specified and directed.

S&F in repairs MCB DB SPN 4 way double door with 200 amp rated busbar, 240V recess mounted with common earth dolly all as directed and specified.

S&F in repairs MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

S&F in repairs MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F in repairs MCB TPN 63 amps ,10KA,415 V,'C' series complete all as specified and as directed.

S&F hylem sheet 3mm thick cut to shape as per site reqmt including cutting slot for fixing switches, sockets, fan regulators all as specified and directed

S&F in replacement of LED flood lights 70 watts 230V AC outdoor type woth thermal mamagement in multiple optics and equipped with IP-66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed

All as per Sl. Item No. 147.00 above but 100 W complete all as specified and as directed.

All as per Sl. Item No. 147.00 above but 120 W complete all as specified and as directed.

Attending complaints of No light, short circuit fault, light fittings, DBs, Switch boards, Panel boards (Internal & External) require to be make it functional by replacing fuse, small piece of wire etc by providing one electrician and one helper in the complete area of DAD residential area round the clock for and including Sundays and Holidays complete in working hours as decided by the MES and maintaining proper complaint register and upkeeping complaint slips duly signed by JE E/M and checked by Engineer in charge all as specified and directed

M&L for replacement of garden bollards complete with MS pipe 40mm and Polycarbonate globe of 200mm dia complete with LED lamp 5watt all as specified and directed

metro electrical services

A K ENTERPRISES

ganesh electricals and airconditioners

Mahindra Electric Stores

M/S - SUJIT ELECTRICALS

Reliable Enterprises