PROVN OF GUARD ROOM NEAR HELIPAD AND PROVN OF VERANDAH TO BLDG NO P 211 FOR 627 ME BN AND PROVN OF TOILET NEAR BLDG NO P 353 OF 627 EME BN AND PROVN OF RAMP TO BLDG NO P 412 AT KALIMPONG MIL STN UNDER GE 867 EWS

Amount

M&L for Excavating over areas exc 1.5m depth, complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Soft/ loose soil, complete all as specified and as directed.

Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil, complete all as specified and as directed.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point in soils, complete all as specified and as directed.

M & L PCC (1:4:8) type D-2 (Using 40 mm grade crushed stone aggregate) in foundation, filling and mass concrete, complete all as specified and as directed.

M&L for brickwork with flyash brick, straight or curved on plan nexc in mortar (1:6) using pre cast cement concret Block (1:3:6) type C-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken stone or boulders, complete all as specified and as directed.

Morum/red bajri filling in floors or paving laid in layers n exc 15cm thick, spread, levelled and rammed incl waterings, complete all as specified and as directed.

M & L 75 mm thick Cement concrete (1:3:6) type D-2, (40mm graded crushed stone aggregate) as in subbase, complete all as specified and as directed.

M&L PCC (1:3:6) Type C1 (using 20mm graded crushed stone aggregate) as in plith protection, complete all as specified and as directed.

M & L Damp proof course 40 mm thick in cement concrete (1:2:4) Type B-0 to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed.

M&L for RCC Nominal Mix (1:2:4) Type B1, (20 mm grade crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

M&L for RCC Nominal Mix (1:2:4) Type B1, (20 mm graded crushed stone aggregate) Beams, cantilevers, bressumm?ers, lintels over 1.5m, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundationand plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

Form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams,etc., complete all as specified and as directed.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M & L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

S&F for structural steel work as in roof trusses (framed), trussed, purlins, framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E?165, complete all as specified and as directed.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal all as per manufacturers specifications, complete all as specified and as directed.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal all as per manufacturers specifications, complete all as specified and as directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction, complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM (1;6) finished even and rough, complete all as specified and as directed.

M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded complete over and including 15 mm thick backing plaster in CM (1:4) finished even and rough, complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite, complete all as specified and as directed.

M&L rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed, complete all as specified and as directed.

M&L rendering 20 mm thick in two layer(10+10mm) CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with intergral water proofing compound @ 3% by weight of cement (WPC measured and paid separately), complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

M&L for preparation on newly plastered/previously untreated surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed.

M&L for three coats of white wash on new plastered surface including prepration of wall surface, complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers, complete all as specified and as directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F 35mm thick second class hardwood, Glazed and skeleton shutters, openrebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S & F Butt hinges, 100 mm size, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F Mild steel barrel tower bolts 200 mm, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed.

S & F 150mm long aluminium handle cost type anodised, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S & F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints, complete all as specified and as directed.

Surface dressing n exc 15 cm deep and getting out in soft/loose soil, complete all as specified and as directed.

M&L Brick work with flyash bricks, straight or curved on plan to any radius in half brick wall built in CM (1:4), complete all as specified and as directed.

M&L for concrete (1:4:8) type D2 in 150mm bore pipe bed to drain pipes incl packing under and haunching against the side of pipes after they are laid and tested, complete all as specified and as directed.

M&L for providing Pre-cast RCC (1:2:4) type B1 as in cover slabs of manhole and similar location (using 20mm graded aggregates) including necessary form work and set in all cement mortar (1:4), complete all as specified and as directed.

M&L for providing cement concrete (1:3:6) in Type C1 (using 20mm graded crushed stone aggregates) lintel upto 1.5m clear span, cills, steps, seismic and other similar bands plinth course, string courses, lacing courses, parapets and railing upto 60 cm in height copings, kneelrs apex stones, bed plates, kerbs not provided. water troughs and the like incl weathering slightly rounded or chamfered angels and throating, complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and as directed.

M&L 350X250 mm X7mm thick / 450X350X7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick backing plaster in CM (1:4) finished even and rough, complete all as specified and as directed.

M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry as in floors includig 20mm thick screed bed CM (1:6), complete all as specified and as directed.

M&L for 100mm thk cement concrete type C-2 (using 40mm graded aggregates) (1:3:6) as in sub base, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S & F Butt hinges, 100 mm size, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and as directed.

S & F vitreous China wash down water closet pan (pedestal) wihie (excluding fixing bolts, flushing cistern and flush pipe) incl plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, whit, with inlet, ball valve float, flush pipe and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and as directed.

S&F tolet paper holder, vitreous china box type, complete all as specified and as directed.

S&F Health facucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl maing connection fixed in position complete in all repect, complete all as specified and as directed.

S & F bib taps 15mm bore cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore, complete all as specified and as directed.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and as directed.

S&F Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets, complete all as specified and as directed.

S&F brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges, complete all as specified and as directed.

S&F shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms, complete all as specified and as directed.

S&F Brass chromium plated shower rose 125mm size, complete all as specified and as directed.

S&F Soap dish, CP, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S & F Stop cock 15 mm bore cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and as directed.

Cutting chases, pinning in brick/pcc block wall and making good to facings where equired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

M &L PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

S & F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint fixed to wall (ISI Marked), complete all as specified and as directed.

S & F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint laid in trenches or in floor (ISI Marked ), complete all as specified and as directed.

S&F PVC ( SWR ) bends 75 mm bore, complete all as specified and as directed.

S&F PVC ( SWR ) bends 110 mm bore, complete all as specified and as directed.

S&F PVC (SWR) branch pieces 75 mm (Single Y) equal or unequal, complete all as specified and as directed.

S&F PVC (SWR) branch pieces 110 mm (Single Y) equal or unequal, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces as in soft/loose soil, complete all as specified and as directed.

M&L PCC (1:3:6) Type C-2 using 40mm graded stone aggregate) as in foundation, filling/mass, complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including finished even and smooth (without using extra cement, complete all as specified and as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) having compressive strenght not less than 75 kg/Sq cm, complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM (1:4) mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for RCC M-25 (20 mm graded stone aggregate) in RCC lintel, band etc, complete all as specified and as directed.

S&F Fe-410-W(Gde-E-250)quality-B Plates of 6mm thick (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and as directed.

S&F steel work in tubular truss or post of different size bend to shape, cut to length etc,including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240, complete all as specified and as directed.

M & L Mild steel plates ,plain or chequered , 5mm thick or over FE -290 (Gde E-165), complete all as specified and as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings built in cement mortar.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and as directed.

Forming jambs, etc. To openings (to foregoing item), including cutting, toothing and properly bonding into old work, of cement work (1:4) also facing, jointing and pointing to match existing work, complete all as specified and as directed.

M&L Applying two coats of acrylic distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the, complete all as specified and as directed.

M&L Glazed Ceramic tiles 8 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in CM (1:4), complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.

S&F Anodised aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc, complete all as specified and as directed.

S&F 5 mm thick tinted/heat absorbing glass of any size with aluminium bedding and, complete all as specified and as directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and as directed.

S & F Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and as directed.

M&L Providing, cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in roof kerbs ,coping or mud stops, rounded or chamfered on edges, complete all as specified and as directed.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of MS terminal boxes of suitable size with cover plate and frame for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces for one light point controlled by one, one way switch 5/6 Amps, complete all as specified and as directed.

Description all as per item No 99.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No. 99.00 here in before but using 2.5 Sqmm size FRLSH copper conductor cable for one 16 Amp socket outlet on independent board

Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and fix Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and Fixing ceiling rose surface bakelite 65 X 50 mm three terminal, complete all as specified and as directed.

Supply and fixing lamp holder insulated body with back plate for batten fitting, complete all as specified and as directed.

Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 10W, complete all as specified and as directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC, complete all as specified and as directed.ed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria, operating voltage range 150-270V AC, complete all as specified and as directed.

Supply and fixing LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 4 way 240 Volts AC, concealed in wall, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 16Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including all fixing arrangement, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1, 50 mm thick precast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I, complete all as specified and as directed.

Supply and fixing electric water heater storage type wall hanging mounting type with powder coated metallic body BEE 5 Star rated with diamond glass lined inner tank with maximum operating pressure of 8 bars incuding factory fitted thermostat maximum 75 Celsius with automatic thermal cutout and multifunctional saftey valve inculding suitable nuts & bolts for fixing arrangement operates on 230V ,maximum power consumtion -2kW of capacity 25 Ltrs , with all accessories and connection pipe 15mm bore 2 Nos for hot and cold water supply,geyser saftey cord with 16Amps ELCB, complete all as specified and as directed. Make : Havells Cat Part No : Monza Nu GHWAMUSWH025 or equivalent Racold, Bajaj.

Supply,laying,jointing and testing, fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 10 sqmm 2 core ISI marked ( IS - 7098 Part-1) and its latest amendments, complete all as specified and as directed.

M & L for Supply and pour natural river sand for cushioning of underground cable in trenches 8 cm below the cable and 15 cm thick over the cable all as directed and specified including watering and consolidation, complete all as specified and as directed.Note: Punned thickness of sand to be consider for measurement purpose.

M&L Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick, complete all as specified and as directed.

S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clams with bolts nuts and wasers, complete all as specified and as directed.

M&L for GI tubing 25 mm dia Medium grade with all fittings laid in trenches or fixing in wall, complete all as specified and as directed.

M&L for GI tubing 20 mm dia Medium grade with all fittings laid in trenches or fixing in wall, complete all as specified and as directed.

Supply and Fix Rotational moulded poly-ethylene water storage tanks (cylindrical vertical closed top) 1000 Lts Capacity icluding suitable outlet tank ipple and locking arrangements hoisted and fixed in position, complete all as specified and as directed.

Cutting , screwing, threding and fixing GI tubing for alteration or addition size of 25/ 23 mm dia GI tubing, complete all as specified and as directed.

S&F for Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25 mm dia GI tubing, complete all as specified and as directed.

S&F for Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20 mm dia GI tubing, complete all as specified and as directed.

S & F in replacement of angles, chanels or Tee sections fixed independently interconnecting with welding work without connecting plates (cut to ordinary lengths indicated) for water tanks staging etc conforming to Fe 410-w (Gde-E-250) quality B & painting with two coat of black bituminious paint over a coat of red oxide primer, complete all as specified and as directed.

S & F of PVC float valves high pressure with polythene float and flynuts complete screwed for iron pipe or PVC ferrule and fixed of size 25mm bore in repairs, complete all as specified and as directed.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

PRASAD PRADHAN AND SON (BID ID -3353688)

GARGO TRADERS (BID ID -3352429)

Sri Gupta Construction (BID ID -3354316)

GEETA CONSTRUCTION (BID ID -3352456)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3353689)

MANOJ JINDAL (BID ID -3353751)

G K SUTHAR (BID ID -3353673)