Special repair of PHC Sohansra in Bhiwani Distt.. (Reinvite)

Amount

Dismantling brick work, Tile masonary or tile linning & tile terracing in cement (HSR 8.5,b)

Dismantling of mud phaska HSR- 8.8g

Stripping and stacking slates or tiles of a roof (HSR 8.10)

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled :- (a) doors (HSR 8.18,a)

Dismantling cement conglemerate/terrazzo floors 25mm to 50 mm thick including concrete base.(HSR 8.25)

Dismantling white or coloured glazed tiles (to be carefully removed)(HSR - 8.38)

Scraping of (a)white wash & colour wash (e) brick dismantled from brick work in lime or cement. (HSR- 8.32a & e)

Brick dismantled from brick work in lime or cement (HSR 8.32e)

Terracing consisting of tiles 22.86cm x 11.43cm x 3.81cm laid over 87.50mm mud filling on layer of 25mm mud plaster and an other layer of mud mortar for laying the tiles , including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc..(HSR 13.13)

Cement concrete 1:2:4 gola 10cm x 10 cm quadrant Along junction of roof with parapet wall finished Smooth ,where specially pecified.`(HSR 13.64)

Providing and fixing PVC Rain Water pipe 6kg. Pressure of ISI mark in cement mortar during masonry work.(HSR 13.89,a,b) 100MM dia PVC pipe 6kg. Pressure

150MM dia PVC pipe 6kg. Presure

Providing & fixing PVC Bend ISI Mark (HSR 13.90,a,b) 100MM dia PVC Bend

150MM dia PVCBend

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand or stone filling (HSR 14.1)

Screed of 40 mm thick lime concrete 1:2:8 to be laid below the topping (HSR 14.7)

Precast chequred tiles of 20mm thickness in ordinary grey cement without chips laid on 20mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors treads of steps and landings ( HSR- 14.45+note)

Providing and fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pttern as specified over base of 20mm thik cement coarse sand morar 1:3 and jointed with white cement slurry mixed with pigment tomatch the shade to tiles (HSR 14.89)

Providing and fixing Ist quality ceramic glazed wall tiles confirming to I.S. 5622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry including pointing in white cement mixed with pigment of matching shades complete (b) Size of ceramic glazed tiles 300x450mm HSR- 14.92b)

Preparation of plastered surfaces for oil bound distemperinluding sand papering the surface applying one coat of linseed oil and filling with approved quality filler consisting of white lead linseed oil varnish and chalk miti including finishing the surface to the required finish complete (HSR 16.52)

Distempring with wahable oil bound distemper (of approved manufacture) two coats on old distempered wotk (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint.(HSR 16.79,b)

Painting two coats with synthetic enamel paint in all shades on new wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Painting two coats with synthetic enamel paint in all shades on new wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Factory manufactured solid flush door shutters , with block board core as per IS 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot –pressed , conforming to IS 2202 part I and II , fixed in position , including iron hinges , screws , chocks /cleats and stops , etc (excluding the cost of any fittings other than specified above , but including labour for fixing the same in position . Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges. (ii) 30mm thick(HSR 17.93,ii)

Providing and fixing aluminium work for doors windows, ventilators and parti-tions with extruded built up standard tubular sections/appropriate Z section and other sections ofapporved make conforming to IS , 733 and IS :1285 fixed with rawplugs and screws or with fixing clips or with expansion hold fasterner including necessary filling up of gaps at junctions at to, bottom and side with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/panclling C.P. brass/stainless steel screws, all complete. Fixed oprtion (Anodised aluminium transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)(HSR 17.95)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 grade I type II in panelling fixed in aluminium doors. Windows shutters and partition frame with c.p. brass / stainless steel screw etc. complete. (HSR 17.97)

Providing and fixing glazing in aluminium door windows ventilator shutter and partitions etc. wih pvc/neoprene gasket etc. Complete (cost of aluminium snap beading shall be paid in basic items).(HSR 17.98,b)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS: 6315 marked for door including cost of cutting floor as required embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box. (HSR 17.99,b) with brass cover plate.

Providing fixing aluminium round shape handleof outer dia 100 mm with secrews etc. complete.(HSR 17.102)

Supplying and fixing glass panes including special metal putty of approved malt. :- glass panes 4 mm thick, exceeding 40 sq. dm areas.(HSR 18.30,b)

Providing and fixing in position best Indian make Indian type orissa or orya water closet suite complete with 100mm HCI 'P' trap other necessary fittings.(b) Size 630mm (i) white (HSR 30.2,b,i)

Providing and fixing in position best Indianmake European type water closet suite with concealed "P' or 'S' trap with r without vent (as approved by the Engineer-in-charge) and all other necessary fitting as fully described in item No. 30.3 abvove (i) white (HSR 30.6,i)

Providing and fixing in position best Indian make flat back or angular lipped front urinal 465mm high consisting of (i) Flat back lipped or angular urinal basin of viterious china ware (to be approvalof the Engineer-in-charge) (HSR 30.19,i)

Providing and fixing in position best indian make (ordinary) lavatory suites consisting of :- Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary. White(HSR 30.41)

Providing and fixing in position best indian make towel rails fixed in with rawlslugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc. (HSR 30.68) a)25mm dia CP Brass adjustable (ii) 600mm long

Providing and fixing inposition best Indian make soap dish fized into wall with CP brass screws and completein all respects including cutting and making goods the walls etc (a) CP brass (i) Soap dish large (HSR- 30.70 a i)

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer -in -charge) complete including cutting and making good the walls etc. (HSR 30.71,a(i))

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge)(HSR 30.75,a)

Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-Charge) (HSR 30.76,a ii,b(i)))

b) 20mm stop cock (i)stop cock make and female and

Dismantling of HCI Pipes & specialsetc 100mm internal diameter ( HSR -30.96a)

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position making connections with inlet and outlet pipes providing over flow and scour provisions with suitable plug on scour pipe including cost of nipples washers flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge ) Except civil work)(HSR 30.119)1500 Ltr. capacity

Providing and laying 80mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 30mm thik fine sand complete in all respect.(HSR 10.159)

Recovery of old material :-Door wooden

Windows

0ld brick tiles