WRDD/EEAM/MLD-I/ eNIT-08/2026-27/SL08

Earthwork in excavation in the canels/ drainage channels/ borrow pits/ River bed/ slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposite the same in any other place within an initial lead od 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil/local soil/ soil mixed with moorum or kankar/ silt, dry or moist/ slushy silt/ sticky soil. For excavation of pipe line trenches as per instruction of EIC.

Labour charge for replacement of damage PVC. Pipe of any length in the Pipe line of HDTW 1 MDTW 1 RLI with new piece/s of pipe after taking out the damage pipe/s from the existing pipe line by cutting with hacksaw and joining the new pipe/s with the existing pipe line using necessary couplers after roughening up surface with wire brush, emery paper and applying the solvent cement (cost inclusive) to make the joint leakproof (pipe & couplers to be supplied departmentally) including transporting departmentally issued pipe/s, couplers etc. from Sub-Divisional Store to the Site all complete as per direction of Engineer-in-Charge. (ii) 315 mm. dia. PVC. Pipe

Labour charge for replacement of damage PVC. Pipe of any length in the Pipe line of HDTW 1 MDTW 1 RLI with new piece/s of pipe after taking out the damage pipe/s from the existing pipe line by cutting with hacksaw and joining the new pipe/s with the existing pipe line using necessary couplers after roughening up surface with wire brush, emery paper and applying the solvent cement (cost inclusive) to make the joint leakproof (pipe & couplers to be supplied departmentally) including transporting departmentally issued pipe/s, couplers etc. from Sub-Divisional Store to the Site all complete as per direction of Engineer-in-Charge. (ii) 200 mm. dia. PVC. Pipe

Labour charge for replacement of damage PVC. Pipe of any length in the Pipe line of HDTW 1 MDTW 1 RLI with new piece/s of pipe after taking out the damage pipe/s from the existing pipe line by cutting with hacksaw and joining the new pipe/s with the existing pipe line using necessary couplers after roughening up surface with wire brush, emery paper and applying the solvent cement (cost inclusive) to make the joint leakproof (pipe & couplers to be supplied departmentally) including transporting departmentally issued pipe/s, couplers etc. from Sub-Divisional Store to the Site all complete as per direction of Engineer-in-Charge.(iii) 140 mm. dia. PVC. pipe

Repair of puncture/holes of any size in existing PVC. Pipeline of HDTW/MDTW/RLI by placing half round PVC. Pipe section of required size to cover the holesl puncture having adequate bearing on all sides and joining the half round section with solvent cement after roughening the surface with wire brush, emery paper to make the joint leak proof as per direction of Engineer-in Charge (cost inclusive of supplying solvent cement at site and transportation of required length of PVC.Pipe to be issued departmentlly, for cutting half round section, from Sub-Divisional Stores to site) (i) 315 mm. dia. PVC. Pipe

Repair of puncture/holes of any size in existing PVC. Pipeline of HDTW/MDTW/RLI by placing half round PVC. Pipe section of required size to cover the holesl puncture having adequate bearing on all sides and joining the half round section with solvent cement after roughening the surface with wire brush, emery paper to make the joint leak proof as per direction of Engineer-in Charge (cost inclusive of supplying solvent cement at site and transportation of required length of PVC.Pipe to be issued departmentlly, for cutting half round section, from Sub-Divisional Stores to site) (ii) 200 mm. dia. PVC. Pipe

Repair of puncture/holes of any size in existing PVC. Pipeline of HDTW/MDTW/RLI by placing half round PVC. Pipe section of required size to cover the holesl puncture having adequate bearing on all sides and joining the half round section with solvent cement after roughening the surface with wire brush, emery paper to make the joint leak proof as per direction of Engineer-in Charge (cost inclusive of supplying solvent cement at site and transportation of required length of PVC.Pipe to be issued departmentlly, for cutting half round section, from Sub-Divisional Stores to site) (iii) 140 mm. dia. PVC. pipe

Earth work in filling in trenches after laying pipe lines (PVC, RCC, ACP etc.) with good earth obtained from excavation of field trenches in layers not exceeding 225 mm, including watering and ramming etc. layer by layer complete. (Payment will be made on the basis of measurement of finished .quantity of work.)

Repairing of T.P.lN.T.P./Alfa Alfa Valve with required wedge, spindle, top cover plate etc. (to be supplied departmentally) including machining, boring and painting etc. as per direction of the Engineer-in-Charge. 150 mm nominal size.