Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC BYE PASS DALHOUSIE ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹18.5 L+₹2.8 L (17.6%)Rejected-Finance MASTER BUILDING DALHOUSIE ROAD DALHOUSIE ROAD PATHANKOT PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹26.1 L+₹10.4 L (65.8%)Rejected-Finance NEAR OLD INDIAN OIL DEPOT JALANDHAR JAMMU BYE PASS ROAD PATHANKOT 145001 PB | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Other than lowest bid. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
4 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN PATHANKOT-145001
REPAIR AND MAINT OF CERTAIN VT/CENTRIFUGAL/ SUBMERSIBLE PUMPING SETS WITH ALLIED MISC WORKS UNDER AGE E/M OF GE (SOUTH) MAMUN
2023_MES_612743_2
GE(S)/M-27/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹40,000
Yes
7 Nov 2023
13 Sept 2023
11 Oct 2023
13 Sept 2023
4 Oct 2023
20 Sept 2023
Amount
M&L for disconnecting electrical/ mechanical connection and taking out VT pumping set having stages 9 to 18 from existing bore well approx depth varying from 30m to 75m with all accessories such as column pipe, top/line shaft, bushes, spiders and bowl assembly etc. transporting to authorized workshop and after repairing including replacement of following spare parts and re-lowering in same bore well with all accessories, including re-commissioning and testing to ensure efficient and smooth functioning to obtain required discharge complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as supply only under respective items here-in-after and labour element included in this item for replacement of major spares/components.
Supply and replacement of old u/s stainless steel top shaft 25 mm dia each length not less than 3m complete all as specified and directed.
Supply and replacement of old u/s stainless steel top shaft 30mm dia each length not less than 3m complete all as specified and directed.
Supply and replacement of old u/s 25 mm dia bright steel line shaft threaded on both ends in multiple length each not less than 3m long complete all as specified and directed.
Supply and replacement of old u/s 30 mm dia bright steel line shaft threaded on both ends in multiple length each not less than 3m long complete all as specified and directed.
Supply and replacement of old u/s 25 mm dia stainless steel line shaft coupling complete complete all as specified and directed.
Supply and replacement of old u/s 30mm dia stainless steel line shaft coupling complete all as specified and directed.
Supply and replacement of old u/s 25 mm dia stainless steel line shaft sleeve complete all as specified and directed.
Supply and replacement of old u/s 30 mm dia stainless steel line shaft sleeve complete all as specified and directed.
Supply and replacement of old u/s 150mm bore, 150mm long heavy duty MS socket fully threaded complete all as specified and directed.
Supply and replacement of old u/s gun metal bearing retainer of existing size complete all as specified and directed.
Supply and replacement of old u/s 25/30mm dia bearing retainer rubber bush for size 150mm dia pipe complete all as specified and directed.
Supply and replacement of old u/s gun metal split type gland including 02 Nos studs suitable for 25 to 38mm dia shafts including provision of gland packing complete all as specified and directed.
Supply and replacement of old u/s gun metal stuffing box bush suitable for 25 to 38mm dia shafts complete all as specified and directed.
Supply only spyder complete with bush of size 25x150mm complete all as specified and directed.
Supply only spyder complete with bush of size 30x150mm complete all as specified and directed.
Cutting worn out portion of stainless steel top/line shaft of 25 to 38mm dia including threading on plain surface to match with existing threading of coupling etc complete all as specified and directed.
Cutting and removing worn out threaded portion of 100/150mm bore MS column pipe, threaded to required length to match with existing connecting system etc complete all as specified and directed.
Supply and replacement of old u/s 150mm bore 7mm thick MS column pipe ( each length not less than 3m.) threaded both ends with one full threaded MS socket fully threaded complete all as specified and directed.
M & L for overhauling and repair of multistage VT pump assembly of 9 to 18 stage and discharge capacity with replacement of defective parts such as gun metal bush, rubber bush, CI neck ring, pump shaft, bowl case & impeller etc including necessary lathe work, metalling, turning, polishing, and reassemble all the parts and refix at same position complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement .
Supply and replacement of old u/s gun metal impeller with lock suitable for 150mm dia bowl assembly complete all as specified and directed.
Supply and replacement of old u/s intermediate bowl case gun metal/bronze bush bearing as per existing sample complete all as specified and directed.
Supply and replacement of old u/s CI neck ring as per existing sample of suction, discharge and intermediate bowl assembly complete all as specified and directed.
Supply and replacement of old u/s gun metal/bronze suction and discharge bowl case bush as per existing sample complete all as specified and directed.
Supply and replacement of old u/s intermediate bowl case bush bearing rubber as per existing sample complete all as specified and directed.
Supply only bolt/stud as per existing sample for bowl assembly complete all as specified and directed.
Supply only stainless steel pump shaft as per existing sample suitable for bowl assembly 9 to 18 stages in multiple length each not exceeding 3m complete all as specified and directed.
Supply and replacement of old u/s intermediate/suction/discharge bowl case assembly as per existing size complete all as specified and directed.
M&L for disconnecting electrical/mechanical connection and taking up or down unserviceable VT /Centrifugal motor of any type, make and capacity from foundation and transporting to authorized workshop to carry out works such as replacement of motor bearing, cutting & removing existing burnt/short circuited winding wire complete, cleaning of core grooves and surfaces, rewinding the motor with superior quality enameled copper winding wire of suitable gauge, numbers of turns and coils including insulating material such as sleeves, lathorised fibe glass, cotton/PVC tape varnishing etc, reassembling, refixing and testing the motor at site on full load complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement .
M & L for rewinding of 3 phase electric motor of 25/30 HP with super enameled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc complete all as specified and directed.
All as per srl item No 30 here-in-above, but electric motor of 40 HP complete all as specified and directed.
All as per srl item No 30 here-in-above but electric motor of 50/60 HP complete all as specified and directed.
All as per srl item No 30 here-in-above, but electric motor of 75/100 HP VT motor complete all as specified and directed.
Supply and replacement of old u/s bearing plate DE/NDE side as per existing sample complete all as specified and directed.
Supply and replacement of old u/s terminal plate as per existing sample complete all as specified and directed.
Supply and replacement of old u/s ratchet plate for VT motor as per existing sample complete all as specified and directed.
Supply and replacement of old u/s ratchet pulley for 3 phase VT motor as per existing sample complete all as specified and directed.
Supply and replacement of old u/s stainless steel bearing No 7316/ 7220 or as per existing sample for VT /CF motor complete all as specified and directed.
Supply and replacement of old u/s stainless steel ball bearing No 6311/6312/6211 or as per existing sample for VT & C/F motor complete all as specified and directed.
S&F in replacement water pressure gauge 0-200 PSI x 4" liquid filled with valve & connected pipe etc including taking down old onecomplete all as specified and directed.
M&L for disconnecting and taking up/down 15000/20000 GHP capacity centrifugal /mono-block pump set of any type from foundation and transporting to authorized workshop carry out repairs such as replacement of pump bearing and overhauling including replacement of minor unserviceable components/spares like 'O' rings, Oil seal, Mechanical seal, pump gland, casing ring, gasket packing and greasing, welding, metaling, turning, polishing, Lathe work etc. along with replacement of major components/spares as per manufactures instruction and testing after repairing and reconnecting at site including re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump set etc complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement .
Supply and replacement of old u/s high carbon steel pump shaft as per existing shaft sample complete all as specified and directed.
Supply and replacement of old u/s heavy duty shaft sleeve with bush as per existing sample complete all as specified and directed.
Supply and replacement of old u/s stainless steel ball bearing No 6306/ 6307 or as per existing sample for C/F pump complete all as specified and directed.
Supply and replacement of old u/s stainless steel ball bearing No 3307/ 7311 or as per existing sample for C/F pump complete all as specified and directed.
Supply only bearing housing DE/NDE as per existing sample for centrifugal pump set complete all as specified and directed.
Supply and replacement of old u/s shaft end bushes as per sample for centrifugal pump set complete all as specified and directed.
Supply and replacement of old u/s bearing housing sleeves as per existing sample for centrifugal pump complete all as specified and directed.
Supply and replacement of old u/s GM air release key as per sample for centrifugal pump complete all as specified and directed.
Supply and replacement of old u/s gland packing for centrifugal pump set complete all as specified and directed.
Supply and replacement of old u/s pump shaft gland packing bush for centrifugal pump complete all as specified and directed.
Supply and replacement of old u/s tyre/star rubber coupling as per sample for centrifugal pump set complete all as specified and directed.
Supply and replacement of old u/s oil seal as per sample for centrifugal pump complete all as specified and directed.
Supply and replacement of old u/s impeller with impeller key as per existing sample for centrifugal pump of capacity upto 20000GPH complete all as specified and directed.
Supply and replacement of old u/s Pump housing nut, bolt and washer as per sample for centrifugal pump set complete all as specified and directed.
M&L for disconnecting electrical/ mechanical connection and taking out submersible pump set of capacity 20 HP to 45 HP from existing bore well approx depth varying from 45 m to 85 m with all accessories and transporting to authorized workshop for rewinding and overhauling of sumbermersible pump and after overhauling / rewinding, re-lowering the pump set in bore well with all accessories, including testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement.
M&L for overhauling and repair of submersible pump assembly of 5 to 9 stage and discharge capacity with replacement of defective parts such as gun metal bush, rubber bush, CI neck ring, pump shaft, bowl case & impeller etc including necessary lath work, metaling, turning, poloshing, and reassemble all the parts and refix at same position complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply only under respective items here-in-after and labour element included in this item for replacement.
Supply and replacement of old u/s stainless steel shaft for submersible pump as per existing sample complete all as specified and directed.
Supply and replacement of old u/s gun metal impeller with key as per existing sample for submersible pump complete all as specified and directed.
Supply and replacement of old u/s s/s shaft for motor as per existing sample complete all as specified and directed.
Supply and replacement of old u/s gun metal bush for submersible pump as per existing sample complete all as specified and directed.
Supply and replacement of old u/s rubber bush as per existing sample for submersible pump complete all as specified and directed.
Supply and replacement of old u/s CI intermediate /suction/discharge case as per existing sample for submersible pump complete all as specified and directed.
Supply and replacement of old u/s CI neck ring as per existing sample for submersible pump complete all as specified and directed.
Supply and replacement of old u/s pump motor coupling as per existing sample for submersible pump complete all as specified and directed.
Supply and replacement of old u/s thrust plate as per existing sample for submersible pump complete all as specified and directed.
Supply and replacement of old u/s flange pipe nut, bolt and washer of size 5/8" fully threded 80 mm long as per existing sample for submersible pump complete all as specified and directed.
Rewinding of 3 Phase, 17.5/25 HP submersible electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, etc complete all as specified and directed.
All as per srl item No 68 here-in-above but 30/40 HP submersible electric motor complete all as specified and directed.
All as per srl item No 68 here-in-above but 45/ 50 HP submersible electric motor complete all as specified and directed.
S&F in replacement old u/s 16 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump including connecting to motor complete all as specified and directed.
S&F in replacement old u/s 10 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump including connecting to motor complete all as specified and directed.
S&F in replacement old u/s 100/125mm bore 7mm thick MS/ GI column pipe with both side flange ends, each length not less than 3m complete all as specified and directed.
Disconnecting existing over heated or burnt cable terminal at existing panel and cutting out over heated / burnt portion of cable, stretching / opening cable to suitable required length from available rings and reconnecting cable in position properly with providing new lugs, tapes etc for cable size upto 95 sqmm complete all as specified and directed.
M&L for carrying out repair to unserviceable motor starter of any type and replacement of defective minor spare parts such as connector, burnt control copper cable, insulator ,Terminal Block, copper thimbles, etc and any other minor spare parts required at site including testing to ensure efficient and smooth functioning of starter complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as supply and replacement under respective items here-in-after.
Supply and replacement of old u/s power contactor 3 pole 40/50 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s power contactor 3 pole 70/80 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s power contactor 3 pole 95/110 Amps with new one as per existing sample complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s Add-on aux. contact Block suitable to existing contactor alongwith connecting and testing complete all as specified and directed.
Supply and replacement of old u/s Ammeter 3 phase with suitable rating to existing CT complete including connection & testing
Supply and replacement of old u/s volt meter 3 phase 500 volts 50 Hz squire type suitable size to existing one complete including connection & testing as per existing sample complete all as specified and directed.
Supply and replacement of old u/s LT CTs of suitable rating & size to existing one complete including connection & testing complete all as specified and directed.
Supply and replacement of old u/s timer of any type with new timer suitable to existing sample for fully automatic motor starter complete all as specified and directed.
Supply and replacement of old u/s single phase preventer of any type with new single phase preventer suitable to existing sample for fully automatic motor starter complete all as specified and directed.
Supply and replacement of old u/s over load relay of range 45 to 120 Amps or as per existing sample complete all as specified and directed.
M&L for replacement of old u/s ON/OFF, Start/ Stop push button suitable size, colour and rating to existing one complete including connection & testing complete all as specified and directed.
M&L for replacement of old u/s indication lamps with LED type indication lamps with showing red, yellow and green colours suitable for 240 Volts AC supply as per existing size complete including connection & testing complete all as specified and directed.
Repair to oil immersed star delta starter by replacing fixed, moving contact, relay, No volt coil etc required for making starter serviceable of any capacity complete all as specified and directed.
Supply and top up/replacement of electric motor starter oil complete all as specified and directed.
S&F in replacement 3 pole MCCB 63 to 100 Amp adjustable type Thermal Release Range with breaking capacity- 25 KA (as per existing sample frame size) complete all as specified and directed.
S&F in replacement 4 pole MCCB 160 Amp adjustable type Thermal Release Range with breaking capacity- 25/36 KA (as per existing sample frame size) complete all as specified and directed.
S&F in replacement 4 pole MCCB 200-250 Amp adjustable type Thermal Release Range with breaking capacity- 36 KA (as per existing sample frame size) complete all as specified and directed.
Supplying, fixing in replacement for on load changeover switch 4 pole, 415 volts, 100 Amps in Open execution type complete all as specified and directed.
Supplying, fixing in replacement for on load changeover switch 4 pole, 415 volts, 160/200 Amps in Open execution type complete all as specified and directed.
S&F in replacement of motor protection circuit breaker (MPCB), 415 Volts, 3-ph, 50 Hz, 63 Amp rating having short circuit & over load protection rotary type including taking down old of any capacity complete all as specified and directed.
Supply, installation, and testing of star deat motor startor fully automatic in sheet metal enclosure type AC-3 phase, 415 volt, 50Hz, having inbiult protection and metering features, rally MN-5, white bank contractor MN-4W suitable for 45 HP electric motor, with relay range 30-75 Amp and testing at site complete all as specified and directed.
All as per item 98 here in above but suitable for 75 HP electric motor with relay range 45-90 Amp complete all as specified and directed.
M&L for preparation of old painted surfaces for repainting complete body of motor with superior quality super enameled paint, colour as per standard Engineering practice for centrifugal & VT motor with base frame etc by spraying and including writing SM No/MES No complete all as specified and directed.
M&L for preparation of old painted surfaces after repairing the broken parts as required and repainting complete feeder pillar boxes/panels/ boards with applying two coats of synthetic enameled paint (as existing color) with using spray machine on prepared surfaces complete all as specified and directed.
S&F in replacement of LT panel door lock chromium plated or as per existing sample complete all as specified and directed.
All as per item 98 here in above but suitable for 25/30/40 HP electric motor with relay range 30-60 Amp complete all as specified and directed.
M&L for dismantling/taking out old unserviceable existing LT 1100 volts cable of any size from LT panel/ duct/ground and supplying & laying connecting cable 1.1 KV grade of size 70 sqmm 3.5 core aluminium conductor, screened XLPE insulated, armoured shielded and PVC sheathed complete all as specified and directed.
Disconnecting Calcium Hypo chlorite dosing plant of any make and capacity alongwith components, and transporting to authorized workshop to carry out repair/replacement of defective minor spares parts i.e. spring, oil seal, pan head screw, circlip, Stroke knob and nut, bolt and washer etc. including cleaning, washing/reassembling the plants and testing after repair complete all as directed by Engr-in-charge Note:- (i) Defective major components/spares if required shall be measured as Supply and replacement under respective item 36 to 67 here-in-after and labour element included in this item for replacement. (ii) All items being spare parts as under will be replaced as required as per cat part or as per existing sample to shoot the equipment for smooth functioning. (iii) Non taken over site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day from contractor bill till complete the job because of unchlorinated water cannot be supplied to the troops.
Supply and replacement of old u/s ball ceramic (liquid end) complete all as specified and directed.
Supply and replacement of old u/s ring seal viton (liquid end) complete all as specified and directed.
Supply and replacement of old u/s suction valve seat (liquid end) complete all as specified and directed.
Supply and replacement of old u/s discharge valve housing (liquid end) complete all as specified and directed.
Supply and replacement of old u/s anti syphon valve (liquid end) complete all as specified and directed.
Supply and replacement of old u/s special function valve (liquid end) complete all as specified and directed.
Supply and replacement of old u/s low level switch (liquid end) complete all as specified and directed.
Supply and replacement of old u/s diaphragm (liquid end) complete all as specified and directed.
Supply and replacement of old u/s foot valve assembly (liquid end) complete all as specified and directed.
Supply and replacement of old u/s head for dosing plant (liquid end) complete all as specified and directed.
Supply and replacement of old u/s white suction/ discharge PE tubing complete all as specified and directed.
Supply and replacement of old u/s PP ring (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s housing for dosing plant (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s Thermostat (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s Varistor (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s Disck 0.5 SQ inch (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s EPU Assembly (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s pulsar assembly with LLS (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s Adj shaft (EPU drive end) complete all as specified and directed.
Supply and replacement of old u/s rotor assembly with bearing brackets & tolerance rings pumps complete all as specified and directed.
Supply and replacement of old u/s shaft and impeller for agitator motor (as per existing sample) complete all as specified and directed.
Supply and replacement of old u/s coil 250 Volt, 50 Hz complete all as specified and directed.
Supply and replacement of old u/s agitator motor single phase flange mounted complete all as specified and directed.
Supply and replacement of old u/s chlorine powder dosing pump of capacity as per existing sample dosing pump complete all as specified and directed.
Supply and replacement of old u/s single head feed rate control with shaft for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.
Supply only pump head (ferrules 1/4" and duckbil included) for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.
Supply and replacement of old u/s roller assembly for DECRIN dosing pump set complete all as specified and directed.
Supply and replacement of old u/s pump tube for DECRIN dosing pump set complete all as specified and directed.
Supply and replacement of old u/s injection check valve 3/8" for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.
Supply and replacement of old u/s weighted suction line strainer 3/8" for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.
Supply and replacement of old u/s Check valve duckbill only (Pk of 5) for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.
Supply and replacement of old u/s connecting Nut 3/8" with adapter for DECRIN dosing pump set model 96NHQ51 complete all as specified and directed.
M&L for disconnecting dosing plant of any model any capacity alongwith components, for repair/replacement of minor defective spares parts i.e. filter, ceramic ball, rubber/oil seal, PVC socket, drain cap, circlip, piston stroke knob, piston sleeves, liner and nut, bolt and washer, gear oil etc.as required at installation for smooth functiong of dosing plant and greasing , cleaning, washing/reassembling and testing of dosing plant after repair complete all as specified and directed. Note:- (i) Non taken over site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day from contractor bill till complete the job because of unchlorinated water cannot be supplied to the troops. (iii) Minor spare parts will be replaced as required as per cat part or as per existing sample to shoot the equipment for smooth functioning.
M&L for Dismantlimng all parts of 3 phase 415 volts electric motor of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire complete and M & L for rewinding of 3 phase electric motor of 3/5 HP with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc complete all as specified and directed.
M&L for Dismantlimng all parts of single/three phase electric motor of any type, make and capacity, cutting & removing existing burnt/short circuited winding wire complete and M & L for rewinding of single/three phase electric motor of 0.5/1 HP with super enamelled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc complete all as specified and directed.
Supply only chlorine gas in empty cylinder of capacity rating 25 Kgs to 100 Kgs suitable for chlorination of drinking water including painting of cylinder as existing colour . The empty cylinder shall be issued on proper gate pass for filling of chlorine gas complete all as specified and directed. Note:- In case failure of gas cylinder valve and chlorine gas leakage then contractor shall be responsible for rectification of defects immediately till stopped of leakage at site as well as at cylinder store yard by use of all safety measures.
Supply only Calcium Hypo Chlorite 65 to 70% (calcium based granular) disinfectant for water treatment is sealed packing of 45 Kg HDPE jars to MES store yard as directed by Engineer-in-Charge. Make of product : As per approved by E-in-C Branch / CEPZ or earlier guide line / policy letter. (Note :- Material shall be procured from the manufactureres approved by MES and make shall be approved by GE before incorporation in the work)
Repair to centrifugal/vertical booster pump up to 10 stage and up to 5 HP by dismentling and segregation of all parts, repair/replacement of defective/worn out parts, rubber/oil seal, nuts , bolts , washers, gland packing and necessary machine work welding , grinding, polishing etc. including greasing. Fixing new spare parts, re-assembling the pump and fixing in position and testing after repair complete all as specified and directed. Note:- (i) Defective major components/spares if required shall be measured as Supply and replacement under respective item 20 to 27 here-in-after and labour element included in this item for replacement. (ii) All the repair carried out at the concern installation or if required in workshop and spare parts as under will be replaced as required as per cat part or as per existing sample to shoot the equipment for smooth functioning.
Supply only Impeller Gun Metal/Bronze complete all as specified and directed.
Supply only Pump shaft stainless steel complete all as specified and directed.
Supply only Impeller casing cast iron/ neck ring complete all as specified and directed.
Supply only Discharge/Suction case housing of cast iron complete all as specified and directed.
Supply only Intermediate casing bush Gun Metal complete all as specified and directed.
Supply only Ball bearing 6202/6203 complete all as specified and directed.
Supply only Gland nut/Cup complete all as specified and directed.
Supply only Pump motor coupling cast iron with rubber complete all as specified and directed.
INDIA ELECTRIC WORKS
M/S ANSHUL ENTERPRISES
Bidder Name
INDIA ELECTRIC WORKS
M/S ANSHUL ENTERPRISES
M/S GULATI ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .