SPL REPAIR TO WASHROOM OF SANGHA AUDITORIUM AND SPL REPAIR TO QTR GD LINE AREA AND COOK HOUSE BLDG NO P01 P03 P05 P07 P08 SPL REPAIR TO BLDG NO TR07 AND TR08 TRS HUT IN VARIOUS UNITS AT AKHNOOR UNDER GE N AKHNOOR

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Glazed ceramic coloured tiles digital tiles in vertical surface 300x600x7 mm thick glossy finish including highlighter tiles, set & jointed in neat cement slurry and pointed white or coloured cement to match the surface over and including 10mm thick CM 1:4 all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm(400x400mm) in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.

Granite (of any type work) 20mm thick (table rubbed and polished) in steps jambs, pillars, window cills, cooking platform, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite including 15mm thick screed bed of CM 1:4 after applying cement slurry @ 3 Kg/Sqm of cement complete all as specified and directed.

Bib Cock cast copper alloy, chromium plated fancy type long body with wall flange & aerator fix with 15mm bore iron pipe complete all as specified and directed.

Angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe fixed in repairs, complete all as specified.

CP Sink mixer central hole basin mixer with popup waste system with 450mm long braided hoses (15mm cartridge size) fixed in repairs all as specified.

Chromium plated Hand shower (Health faucet) with 1.25m long flexible tube of stainless steel in chrome finish and wall hook fixed, complete all as specified and as directed.

Vitreous china urinals of size 340x320x600mm (Top inlet) with fixing accessories including spreader & PVC connection complete all as specified and directed.

Striaght urinal partion of 10mm thick toughened glass of size 900x450mm fixing complete all as per manufactures instruction all as specified and directed.

Vano bend for urinal complete all as specified and directed.

CP urinal spreader complete all as specified and directed.

S&F in repairs table top vitreous china wash hand basin of size 495x395x150mm including waste pipe coupling, popup mixer and PVC connection complete all as specified and directed.

S&F in repairs waste coupling of chromium plated brass 32/40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin fixed in repairs complete all as specified .

S&F in repairs PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified.

Vitreous china wall hung wash basin with fixing accessories, white, flat back, size 590mm x 490mm x 185mm full pedestal including 15mm bore CP Central hole Basin Mixer with Popup waste system with 450mm long braided hoses for mixing hot and cold water screwed down for iron pipe including 32mm dia waste coupling,waste pipe, cutting for and pinning in ends of brackets or erecting stand porcelain stopper a pair of CI brackets fixed in repair complete all as specified and directed by Engineer in charge.Make-Jaquar (Lyric) cat part no. LYS-WHT-38801 & LYS-WHT-38301 or its equivalent cat part of make specified in list make, as approved by GE.

S&F in repairs rimless bowl with cistern for coupled WC of size 360x610x805mm with UV soft closed slim seat cover,hinges, dual flushing cistern fittings, fixing accessories and complete accessories set including 'P' trap complete all as specified and directed.

Vitreous china wash down water closet pan pedestal pattern in white colour including seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed.

PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe etc. fixed in repairs, complete all as specified and as directed.

Chromium plated brass towel rail 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls and fixed in repairs complete all as specified and as directed.

Towel ring of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats etc fixed in repair, complete all as specified.

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard complete all as specified and directed.

Jet Spray (Stainless Steel) with 1.5 meter Tube fixed in repairs, complete all as specified and as directed.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in any coloured with integral foot rest incl lime motor, 'S' trap and complete all as specified, fixed in repairs, complete all as specified and directed.

PTMT Grating Round 140 mm dia fixed in repairs complete all as specified.

Waste pipe for WHB/Urinal for 32/40mm fixed in repairs, complete all as specified and as directed.

Dismantling water tanks of cap exc 500 but n.exc 1000 ltr all as specified and directed.

Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) 3 layered hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed.

20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) as in repairs complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal unsv pipe with all fittings from site, complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal unsv pipe with all fittings from site, complete all as specified and directed.

Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including jointing in the CPVC solvent and fixing the pipes with clamps to walls/ceiling or laying in floors complete all as specified.

110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floors etc. laid in repairs complete all as specified and directed.

110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints fixed to wall etc. fixed in repairs complete all as specified and directed.

75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floors etc. laid in repairs complete all as specified and directed.

75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints fixed to wall etc. fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius 75mm dia with access doors fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius 110mm dia with access doors fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece of 75 mm bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece of 110 mm bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece of 75 mm bore pipe, single (double Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece of 110 mm bore pipe, single (double Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door fixed in repairs complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal of 75mm bore provided with access door fixed in repairs complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal of 110mm bore provided with access door fixed in repairs complete all as specified and directed.

UPVC (SWR) reducers 110mm dia complete all as specified and directed.

PVC SWR vent cowl 75 mm complete all as specified and as directed.

PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified.

PVC (SWR) multi floor trap with grating including jointing with solvent cement (75mm diameter for outlet in mm) fixed in repairs, all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.

Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Aluminium handles cast type anodised of size 125mm long ISI marked complete all as specified and as directed.

250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wiremess shall be measured and paid separetely) including necessary joining cleats, glazing rubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 no.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified and directed.

Dismantling of timber scantling in framed work 40sqcm and over in section, as in any position, complete all as specified.

Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering, complete all as speciified and directed.

Rolled mildsteel structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework, complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 in half brick thick, complete all as specified.

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc all as specified and directed.

Rendering 15mm thick cement plaster with cement mortar(1:4) with mixing of water proofing compound. on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.

Rendering 15mm thick cement plaster with cement mortar (1:6) on fair faces of brickwork or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed.

Preparation of newly plastered surfaces & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

Machine cut kota stone slab flooring of size not less than 53 x 53cm and 18-20mm thick laid and jointed with grey cement slurry and mixed with pigment to, match the shade of slab including rubbing and polished with minor cut polishing 100mm wide marble Patti/ border all around including 15 mm thick screed bed CM (1:4) complete all as specified and as directed.

Description all as per item No-75 above but in vertical surfaces such as in skirting, dado etc.fixed over and including 10mm thick plaster in CM (1:4), complete all as specified and directed.

Providing cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight), complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) as in floor finished even and fair receiving tiles complete all as specified and as directed.

Pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock strike plates complete including providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed.

PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame.and including 50 mm parapet coping all as specified and directed.

PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.

35mm thick, 2nd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified.

150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

Aluminium handles cast type anodised of size 100mm long ISI marked complete all as specified and as directed.

300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

Floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and as directed.

Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP braket, incl taking down of old curtain rods, complete all as specified.

Pressed Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 .

Preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over one of red oxide primer complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over one of pink primer complete all as specified and directed.

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in anysoft/loose soil complete all l as specified and directed

Plain Cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

Plain Concrete bed to drain pipes in PCC 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested for 150mm internal dia of pipe, complete all as specified and directed.

RCC class NP3 150mm dia drain pipes laid in trenches and jointed with & including coller ISI marked complete all as specified and directed.

Pre cast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs including use and waste of necessary formwork complete all as specified and directed.

TMT Bar 8mm dia bar and over cut to length, bent to shape required including cranking, bending, hooking ends, binding, with and including mild steel wire (annealed) not less than steel wire 0.9mm dia or securing with clips, complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed.

Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply only liquid water proofing compound conforming to IS 2645-1975 of approved make complete all as specified and directed.(Dosage- @ 200ml per 50Kgs of Bags of cement)

Soakage wells excavation of size 1.2M dia x 4.5 M effective depth in any type of soil foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M25 concrete complete filled with brick complete all as specified and directed. (DRG No. CEUZ/TD-1585/2021)

Septic tank for 50 users designed in any type of soil, double chamber with manhole openings and cover connection etc complete all as specified and shown in (DRG No:- CEUZ/TD-1585/2021)

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

One light point controlled by one switch

One 3 pin 5 amps socket point controlled by one 5 amps switch on independent board

One 3 pin 5 amps socket point controlled by one 5 amps switch on same board

All as per item No 106 above but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:- (a) One 6 Pin 16/6 amps socket outletr point controlled by one 16 amps switch on independent board.

Modular type switch 06 Amps, single pole,1way,1/2 module,240V, ISI Marked complete all as specified and directed.

Modular type switch 16 Amps, single pole, 1way,1/2 module, 240V, ISI Marked Complete all as specified and directed.

Modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed.

Modular type socket shuttered type 16 Amps, 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed.

Angle lamp holder, insulated body with back plate for LED lamp including removing old unsv item complete all as specified and directed.

Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

LED light fitting 1x20W, 4 feet, 220V, general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver LED fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose as approved by GE fixed in repairs complete all as specified and directed.

LED light fitting 1x10W, 2 feet, 220V, general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver LED fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose as approved by GE fixed in repairs complete all as specified and directed.

LED bulb 12 watts, 240Volts,50Hz pin type as approved by GE and including removing old unserviceable item complete all as specified and directed.

Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 8 way suitable for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed.

MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed.

MCB single pole & neutral 40 to 63 amps 240 volts 10 KA 'C' series complete all as specified.

Exhaust fan single phase plastic body, AC 230 Volt, 50 Hz, 900 RPM of size 300mm sweep, IP-55 with louvers shutter complete with all accessories as in list of Makes approved by GE and connecting up from ceiling rose incl taking down old u/s Exhaust Fans shall be deposited to MES store yard.

Sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

LED INVERTER batten 20 watt 4 feet with square profile and poly carbonate channel lithium ion battery with charging time 8 to 10 hours and backup time upto 4 hours and connecting up with twin core twisted copper wire from LED fitting to ceiling rose as approved by GE and removing old unserviceable fitting complete all as specified and directed.

LED secruity light fitting of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with suitable inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM with Reinforcement bars of 8mm dia @120mm c/c excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Ceiling fans complete with blades. Down rods, electronic regulator and accessories, 230 volt, 1400mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) as in list of Makes and as approved by GE incl taking down existing and depositing the same with MES store yard all as specified and directed.

Taking down and supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor, 1100 Volt grade, cross sectional area 25 sqmm 2.0 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Please Enable Macros to View BoQ information