Construction of Entry Gate at RD 63/165 on NH 5 Parwanoo in the State of Himachal Pradesh

Amount

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.) Manual Meanb as per MoRT&H Specification Clause 304 as per fifth revision including all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. M-15 Grade (5.50 bags) as per MoRT&H Specification Clause 1500, 1700 and 2100 as per fifth revision including all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications R.C.C grade M 25 Grade ( 8.06 bags) as per MoRT&H Specification Clause 1500, 1700 and 2100 as per fifth revision including all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Supplying, fitting and placing HYSD bar reinforcement grade Fe-500 in foundation complete as per drawings and technical specifications as per MoRT&H specification Clauses 1600 all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately as per MoRT&H specification Clauses 1600 all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Providing and fixing prepainted galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per Delhi SR all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Providing and fixing prepainted galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as per direction of Engineer-in-Charge and as per as per Delhi SR all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Ridges Plain ( 600-600mm)

Gutter ( 600mm over all girth)

Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade) as per MoRT&H specification Clauses 803 all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mix primer paint burshing red lead, red-oxide, zinc-oxide chrome as per direction of Engineer-in-Charge and as per HP.PWD., Specification 1990 Volume-I including carriage of all labour, equipment and materials to various locations through all modes of transportation in all lead and lift and all incident charges.

Precast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per MoRT&H specification Clauses 408 all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRT&H specification Clauses 810 all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Providing & Fixing MS Sheet 2mm thick in ceiling as per drawing and technical specification complete in all respect all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Providing & Fixing MS Sheet Facia with Jhallar eaves board /facia/soffits /ceiling including cutting, fixing and welding to steel roof member and applying a coat of red lead primer with computerized design as per drawing and technical specification complete in all respect as per Engineer in charge all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Providing & Fixing ACP (Aluminium Composit panel) Sheet 4mm thick Ceiling Over MS Angle & T Section complete in all respect as drawing and technical specification as per Engineer in charge all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

For Elevation Work & Architecture Work computerised design by 3D technology and laser cutting of sheets as per drawing ( Side sheet for flowers, Trinagle portion , square portion and Jhallar ) all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Providing and fixing on wall face G.I. rain water pipes 100mm dia including MS holder bat clamps of approved design including all type of accessories like plain bend, corner type bend and plain shoes etc. all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge

Providing and laying heavy duty precast cement concrete interlocking paver block vibro compacted upto M50 grade including border or curve block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (one cement 4 sand) laid over and jointed with need cement slurry mixed with pigment 2 match the shade of blocks including curing rubbing and polishing complete (sub base concrete floor to be paid for separetely as per MoRT&H /CPWD latest cpecification in all lead lift and carriage of material by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Anand Enterprises