Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC D BLOCK D 57 BARRA 8 BARRA 8 BARRA 8 KANPUR NAGAR UTTAR PRADESH 208027 | KANPUR NAGAR | UTTAR PRADESH | 208027 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹43.8 L+₹1.3 L (3.10%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹44.8 L+₹2.3 L (5.41%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹47.1 L+₹4.7 L (11.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹47.2 L+₹4.8 L (11.3%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Jun 2024, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF ) Gorakhpur
GE (AF ) Gorakhpur
WELCOME MAINT OF OMQs AND SMQs AT AKASH VIHAR AND PERIODICAL SERVICES TO OTM BLDGS AT MES, 756 SU AT (AF) STN GORKAHPUR
2024_MES_653137_1
9159/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF ) Gorakhpur
Class D cat a i
8 documents required · 8 mandatory
₹500
GE (AF ) Gorakhpur
₹90,000
Yes
23 Jul 2024
10 May 2024
10 Jun 2024
10 May 2024
7 Jun 2024
24 May 2024
10 May 2024 - 16 May 2024
Amount
Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed.
M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.
M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 3% of qty of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.
M&L Rendering 5mm thick in CM 1:3 on celing, finished even and smooth without using extra cement complete all as specified as directed.
Supply only integral water proofing compound ISI Marked complete all as specified and directed at site.
M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on ceiling complete all as specified and as directed.
M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.complete all as specified and directed at site.
M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer complete all as specified as directed.
M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of chalk whiting complete all as specified as directed.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces and preparation of old painted surfaces and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Note: Work shall be done as per MoU between manufature of paint and their authorised applicator over and including applying 1mm thick Birla/JK wall care putty by using mechanised euipments complete all as specified and as directed by Engr-in-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coats of cement base paint complete all as specified and as directed
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces and preparation of old painted surfaces and applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Note: Work shall be done as per MoU between manufature of paint and their authorised applicator complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surfaces of wall and applying one coats of cement base paint complete all as specified as directed.
M&L for preparation of old surfaces of wall by applying two coat distempering with distemper dry, white or tinted complete all as specified as directed.
Taking down door chowkats or frame n. exc 1.50 sqm each (without taking off shutters from the frame).
Taking down door chowkats or frame exc 1.50 sqm but n.exc 4 sqm each (without taking off shutters from the frame).
Taking down shutter of any description n exc 1 sqm each each and removing from site complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge.
S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm.
S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm.
S & F steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded.
S & F steel ventilator with top hung shutters including hinges steel peg stay, guard bars 10mm sqare, MS bars welded @ 175 C/C horizontally etc complete all as directed.
S & F for framed works such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars iron doors etc or similar work confirming to Fe-410-0 or 310-0 Fe 290 Gde E-165.complete all as specified and directed at site.
S & F factory flush shutters water proof BWR grade solid core construction with block board core and ply wood face panel commercial type both sides 30mm thick.complete all as specified and directed at site.
M & L factory made 2nd Class hard wood 30mm thickness Glazed and skeleton shutters, open rebated and prepared to receve glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc.; Second class hard wood 30mm thick shutter.complete all as specified and directed at site.
M & L factory made 2nd Class hard wood 30mm thickness Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.
S&F factorymade solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification as specified
S&F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed at site.
M&L provding cement concrete 1:3:6 using 20mm graded stone agg as in hold fast complete all as specified & directed.
S&F butt hinges medium weight cold rolled mild steel 100mm.complete all as specified and directed at site.
S&F 125mm aluminium anodised of extruded section barrel tower bolts.complete all as specified and directed at site.
S&F 150mm long alumiunium handles cast type anodised.complete all as specified and directed at site.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.
Welding in repairs n.exc 2.5 cm in length, thickness of metal to be welded N exc 6 mm, complete all as specified and directed at site.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete all as specified and directed at site.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete all as specified and directed at site.
S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate. complete all as specified and directed at site.
S&F mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed at site.
S&F in repairs mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed at site.
M&L for preparation of new painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed .
S&F in repair stainless steel harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers but of anodised aluminium alloy etc complete al as specified and directed.
Hacking out old broken glasses any thickness size, quality or description from metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg hight complete all as specified and as directed.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .
M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
M&L for doublecharged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.
Supply and fix in repairs 15 mm bore Bib tap standard of PTMT fancy type any colour highpres sure screwed for iron pipe and fixed (Minimum weight 15mm-105gms).
S&F in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.
S & F in Repair Two way bib tap 15mm with wall flange complete all as specified as directed.
S&F in repair stop valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle with pillar tap including removing the existing one complete and refixing with new bracket and making good all connections.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.
S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.
S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.
S&F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all as in repairs specified and directed.
S&F in repair brass chromium plated shower rose 125mm size size fixed to pipe all as specified and directed.
S & F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed.
S&F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed .
S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed
S&F in repair PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm complete all as specified and directed
S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified.
S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed.
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.
Dismantling water tanks exc 250 but n.exc 500 ltrs and removing to store complete all as specified & directed.
Dismantling water tanks exc 500 but n.exc 1000 ltrs and removing to store complete all as specified & directed.
S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.
S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed at site.
S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. complete all as specified and directed at site.
S & F in repairs 20 mm bore in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
M&L for Cleaning and removing all scale and dirt, etc, from tanks exc 250 but n.exc 500 ltrs and from mouths of circulating pipes, etc. complete all as specified and directed at site.
M&L for Cleaning and removing all scale and dirt, etc, from tanks exc 500 but n.exc 1000 ltrs and from mouths of circulating pipes, etc. complete all as specified and directed at site.
S&F in repairs water tank covers of capacity up to 1000 ltrs complete all as specied and directed.
S&F in repair PVC waste pipe 32/40mm dia for wash basin/sink/urinal ISI marked complete all as specified and directed at site.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .
S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed.
M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed.
S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed.
M&L preparation of new painted steel surfaces of any description, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed .
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coats of cement base paint over 1 mm thick wall care putty by using mechanised euipments complete all as specified and as directed by Engr-in-Charge. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.
M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat alkali resistant primer by using mechanised euipments complete all as specified and as directed by Engr-in-Charge. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.
M&L for preparation of old painted brick or concrete surfaces applying two coats of exterior emulsion weather coat on surfaces of any description with roller finish by using mechanised euipments complete all as specified and as directed by Engr-in-Charge.
M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint, all as directed.
M&L for two coat of hydrolock chemical of Make asian applied with rooler to prevent the leakage/ seepage from wall Apply first coat of SmartCare Hydroloc Xtreme at 10% dilution with a forced coverage of 2.98 to 3.36 sq. per ltr from skirting to the affected area, covering an additional one ft distance across all sides of affected area. Allow it to dry for 6-8 hrs complete all as specified and directed at site.
M & L preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specifie and directed.
M&L for preparation of old decorated plastered or un plastered surfaces of walls, pillasters, cornices,etc by complete removal of existing treatment by scraping , washing,rubbing down and stopping etc and applying two coats of exterior emulsion paints in camouflage pattern over 2mm thick cement based putty upto height 10m from grond level complete all as specified and directed.
M/S SHAILZA TRADERS
M/S NITISH ASSOCIATES
A K CONSTRUCTIONS
M/S B.P. CONSTRUCTION
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .