REPAIR OF WOODEN FURNITURE, SOFA SETS AND STEEL FURNITURE INCLUDING POLISHING/ VARNISHING/ PAINTING OF WOODEN/ STEEL FURNITURE AT AFS, ALGs MECHUKA, TUTING AND VIJAYNAGAR UNDER GE (AF) JORHAT

Amount

Removing/taking out carefully following old unserviceable worn out/damaged/broken components/parts of the following wooden furniture and M&L of the same with new materials/components/parts of same size, shape and made to well fitted with finishing the same to receive polished with glossy finished complete all as specified and as directed listed below and all as shown and specified on drawings:-

BED PLY TOP (DRG NO. FD-246)

4mm thick ply wood of head board teak face vineer (one side).

4mm thick ply wood of foot board teak face vineer (one side).

Long rail made out of second class hard wood

Short rail made out of second class hard wood

Leg made out of second class hard wood

12mm thick plywood of size 1890mm x 900mm bed top BWR commercial type

MIRROR DRESSING GENTS (DRG No. FD/E6/MAP/16)

(i) Taking down old u/s frame of table dressing gents with mirror and M&L first class hard wood frame with looking mirror and 6 mm thick plywood on back of frame shall be provided and applying one or more coats of french polish to frame after preparation of surfaces complete all as specified and as directed and all as shown on drawings:-

Moulding of edge mirror shall be with teakwood

Hinges of mirror shall be brass or stainless steel

Magnetic catch shall be provided for the frame

PEG TABLE (DRG NO. FD 277)

Table Top 450X300mm, 18mm thick pre-laminated particle board with around 4mm thick second class hard wood edging.

Leg made out of second class hard wood

Side rail long of second class hard wood

Side rail short of second class hard wood

TEAPOY (DRG NO.FD 278)

Table Top 600x450mm, 18 mm thick pre-laminated particle board with around 4mm thick second class hard wood edging.

Leg made out of second class hard wood

Side rail long of second class hard wood

Side rail short of second class hard wood

TABLE WRITING (DRG NO. FD 275)

Leg made out of second class hard wood.

Stiffner made out of second class hard wood.

Door with 18mm thick plywood BWR grade with 1mm thick laminated sheet fixed with adhesive and around 4mm thick first class hard wood edging.

Drawer all as specified as per drawing.

Table Top of size 1145x600x18mm thick prelaminated particle board with 4 mm thick around second class hard wood edging.

Side rail long of second class hard wood.

Side rail short of second class hard wood.

TABLE (SIZE 900x600x760MM W/O DRAWER (DRG NO. FD-42 M)

Table top of size 900x600mm, with 18mm thick pre-laminated particle board with around 4mm thick second class hard wood edging.

Leg made out of second class hard wood.

Side rail long of second class hard wood.

Side rail short of second class hard wood.

Stiffner of size 25x40mm made out of second class hard wood.

CHAIR WOODEN BOTTOM (DRG NO. FD-285)

Front Leg made out of second class hard wood.

Rear Leg made out of second class hard wood.

Stiffner made out of second class hard wood.

Front / side rail with necessary screws.

Seat 6mm thick plywood commercial.

CHAIR EASY (DRGS NO. FD-17 M AND FD-229)

Front Leg made out of second class hard wood.

Rear Leg made out of second class hard wood.

Rail with necessary holes for canning made out of second class hard wood.

Arm rest made out of second class hard wood.

SOFA SET 4/5 SEATER (DRG NO. FD-281)

Foam of cushion with cover of sofa set 4/5 seater and replacement with new cushion of Sofa set of size 530x560x100mm, 40mm density and covered with new tepastry cloth, superior quality as approved by GE.

Front Leg made out of second class hard wood.

Rear Leg made out of second class hard wood.

Arm rest made out of second class hard wood.

BOOK CASE (DRG NO. FD 237)

Top of size 1200x300mm with 18mm thick plywood with 1mm thick laminated sheet fixed with adhesive and around second class hardwood edging.

Back with 6mm thick plywood type BWR.

Door leaf with 18mm thick plywood with 1mm thick laminated sheet fixed with adhesive and around 4mm thick first class hardwood edging.

TABLE CENTRE (DRG NO. FD 274)

Table top of size 900x450mm with 18mm thick prelaminated particle board with around 4mm thick second class hardwood edging.

Leg made out of second class hard wood.

Side rail long of second class hard wood.

Side rail short of second class hard wood.

TABLE DINING 04 PERS (DRG NO. FD/E6/MAP-II/03)

Leg made out of second class hard wood.

Table top of size 1200x900mm with 18mm thick prelaminated particle board with around 4mm thick second class hardwood edging.

Side rail long with second class hard wood.

Side rail short of second class hard wood.

TABLE DINING 06 PERS (DRG NO. FD-273)

Leg made out with second class hard wood.

Table top of size 1500x900mm with 18mm thick prelaminated particle board with around 4mm thick second class hardwood edging.

Side rail long with second class hard wood.

Side rail short with second class hard wood.

CHAIR DINING JCOs/ORs (DRG NO. FD/MAP-II/05)

Removing the old PVC seat and S&F with new seat of chair dining JCO's/OR's as per existing shape and size.

Front Leg made out of second class hard wood.

Rear Leg made out of second class hard wood.

Stiffner made out of second class hard wood.

Front / side rail with necessary screws.

CHAIR DINING OFFRS (DRG NO. FD/MAP-II/04)

Removing wornout tapestry cloth and cushion from chair dining offrs and S&F cushion and tapestry cloth.

Front Leg made out of second class hard wood.

Rear Leg made out of second class hard wood.

Stiffner made out of second class hard wood.

Front / side Rail made out of second class hardwood.

SIDE BOARD (DRG NO. FD 26M)

Top of size 1220x445mm, with 18mm thick plywood with 1mm thick laminated sheet fixed with adhesive and around 4 mm thick second class hard wood edging.

Door with 18mm thick plywood BWR grade with 1mm thick laminated sheet fixed with adhesive and around 4mm thick second class hard wood edging.

Side with 18mm thick plywood BWR grade with 1mm thick laminated sheet fixed with adhesive.

Back with 6mm thick plywood BWR of size 1220x625mm.

Drawer as per existing size.

Steel knobs suitable size for drawers of wooden furniture.

Steel handles suitable for drawers of table bed side (MAP) / Table dressing ladies (MAP).

TABLE BED SIDE (DRG NO. FD 276)

Side of the table bed side with 18mm thick pre-laminated particle board having teak veneer face on one side and commercial on other side.

Top with 18mm thick particle board having teak veneer face on top cut to size and shape.

Back with 6mm thick commercial plywood.

Shelf with 12mm thick particle board.

HAT STAND WITH MIRROR (DRG NO. FD-233)

Mirror of size 300x440x5.5mm thick

Copper oxidized steel pegs as pre drawing for existing cap stand with mirror. Brass pegs of size 120x75mm shall be fixed with brass screw.

4mm thick teak ply wood shall be provided to front of frame cut to size and shape.

4mm thick commercial ply shall be provided to the back of frame cut to size and shape.

Painting of name plate of 15" x 12" size with synthetic enamel paint, back ground in black paint and capital letter in white paint, font size 40mm height of letter as existing / suitable for name plate.

Removing unserviceable cane from various types of chairs and re-canning the same with new plastic cane 2mm wide oval type in white colour and border with 4mm wide.

POLISHING Removing of all old face out polish by polish remover/ scrapper or by caustic soda or by any other means without damaging surfaces of furniture, making the surface smooth and free from dust and other foreign materials and applying high class french polish till glossy/shine finish obtained complete all as specified and as directed as listed below:-

Side Board (Drg No. FD 26M)

Chair wooden bottom without arm. (Drg No. FD-285)

Peg Table (Drg No. FD 277)

Sofa set 05 Seater (Drg No. FD-281)

Stool dressing (Drg No. FD 282)

Teapoy (Drg No. FD 278)

Table Centre (Drg No. FD 274)

Table writing (Drg No. FD 275)

Chair Dining JCOs/ORs (Drg No. FD/MAP-II/05)

Table of size 900x600x760mm (Height) without Drawer (Drg No. FD-42 M)

Chair Dining Offrs (Drg No. FD/MAP-II/04)

Table Bed Side (Drg No. FD 276)

Table Dining 06 Pers (Drg No. FD-273)

Table Dining 04 Pers (Drg No. FD/E6/MAP-II/03)

Book Case (Drg No. FD 237)

Sofa set of 4 Seater (Drg No. FD 281)

Chair Easy (Drgs No. FD-17 M, FD-229)

Mirror Dressing Gents (Drg No. FD/E6/MAP/16)

Bed Ply Top (Drg No. FD-246)

Chair Writing (Size to be verified at site before quoting)

ALMIRAH LARGE STEEL (DRG NO. FD-1031) :-

S&F leg of Almirah Large steel made out of 1mm thick mild steel sheet as shown on drawing and applying two coats of synthetic enamelpaint over and including one coat of red oxide primer by spray painting compressor, including removing of unserviceable leg complete all as shown on drawing and as directed.

All as per Serial item No. 24.01 here-in-before but shelves of almirah large steel

All as per Serial item No. 24.01 here-in-before but door of almirah large steel

S&F Locking Device including locking rods for Almirah large steel including removing/taking out of unservicable locking device complete all as shown on drawing and as directed.

S&F Handle 150mm long, chromium plated for Almirah large steel including removing/taking out of unservicable handle complete as shown on drawing and as directed.

S&F Lock universal type 6 lever, made out of mild steel, powder coated for Almirah large steel including removing/ taking out of unservicable lock complete as shown on drawing and as directed.

S&F of butt hinges of existing Almirah Large Steel complete all as shown in drawing and as directed.

ALMIRAH MEDIUM STEEL (DRG NO. FD-1032)

All as per Serial item No. 24.01 here-in-before but leg for Almirah medium steel

All as per Serial item No. 24.02 here-in-before but Shelves for Almirah medium steel

All as per Serial item No. 24.03 here-in-before but door for Almirah medium steel

All as per Serial item No. 24.04 here-in-before but locking device for Almirah medium steel

All as per Serial item No. 24.05 here-in-before but handle for Almirah medium steel

All as per Serial item No. 24.06 here-in-before but lock for Almirah medium steel

All as per Serial item No. 24.07 here-in-before but lock for Almirah medium steel

TABLE CLERKS STEEL (DRG NO. FD-1004)

S&F Drawer made out of 1mm thick mild steel sheet with all the necessery cutting, moulding, make hole welding etc, and applying two coats of synthetic enamel over and including one coat of red oxide primer by spray painting compressure including removing of unserveciable/ damaed drawer complete as specified and as shown on drawing and as directed.

S&F lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock complete as specified and as shown on drawing and as directed.

S&F PVC recess handle including fixing with self tapping screw including removing of old unservicable/damaged handle complete as specified and shown in drawing and as directed.

S&F hard rubber shoe including removing of old unservicable rubber shoe complete as shown in drawing and as directed.

S&F as in repairs Top of Table Clerks steel 18mm thick pre-laminated particle board with 4mm thick around 1st class hard wood edging complete all as specified and as shown on drawing and as directed.

Welding point not less than 25mmx5mm of existing steel furniture as required complete all as specified and as directed.

PAINTING OF STEEL FURNITURES M&L for preparation externel and internal surface of following steel furnitures insluding de-rusting/scratching, paste putty, sanding, etc. and applying two coats of synthetic anamel paint over and including one coat of red oxide primer before applying paint by spray paint 1st grade quality (existing colour/required colour) compressor complete all as specified and shown on drawing and as direcetd of the following items of furniture:-

Almirah Large steel

Almirah Medium steel

Rack Six Tier Steel

Chair CB Steel with Arm

Stool Steel

Table Clerk Steel

CHAIR WRITING (DRG NO. FD-280)

Front Leg made out of 2nd class hard wood

Rear Leg made out of 2nd class hard wood

Stiffner made out of 2nd class HW all as specified.

Front/side rail with necessary holes for canning made out of 2nd class hard wood

Arm Rest made out of 2nd class hard wood NOTE:- The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ

M/S DHAR AND DHAR

AJOY DUTTA CHOWDHURY AND CO

M/S SANTOSHI TRADERS

NIHAR ENTERPRISE

SANDHUSONS

M/S N M TRADERS

Bidder Name

NIHAR ENTERPRISE

SANDHUSONS

M/S N M TRADERS

AJOY DUTTA CHOWDHURY AND CO

M/S GOSWAMI BROTHERS

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS