REPAIR TO CB SHUTTERS TILING PLASTER TO CERTAIN BLDGS OF OUTSIDE POCKET AREA AND

Amount

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material to a distance n exc 2.5 KM distance and depositing where as directed, complete all as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as directed.

M&L for premium quality non skid coloured ceramic floor tiles 7 to 8mm thick area of each tile exceeding 0.06sqm but n exc 0.11 sqm as in floors/as in patches of floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement mortar 1:4 complete all as specified.

M&L for premium quality non skid coloured ceramic floor tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 sqm as in floors/as in patches of floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:4 complete all as specified.

M&L for premium quality glazed ceramic tiles of size 450x300x and 6 to 7mm thick coloured on vertical surfaces such as skirting dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in Cement Mortar 1:3 complete all as specified.

M & L for first quality, glazed ceramic, straight cut/joint free, coloured tiles, 7-8 mm thick of size exceedingh 0.06 Sqm but not exceeding 0.18 sqm , on vertical surfaces such as dados etc over & including 10 mm thick rendering (1:4), set and jointed with grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 10mm thick Glazed Vitrified ceramic tiles, light shade (square/rectangular), area of each tile not exc 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15mm thick in CM (1:4) for laying floor finishes complete all as specified.

M&L for 25 mm thick PCC 1:2:4 mix, type B0 (using 12.50 mm graded stone agg) as in sub base of floor finishing the surface even and rough to receive tiles etc complete all as specified.

M&L for 10mm thick Glazed Vitrified ceramic tiles, light shade (square/rectangular), area of each tile not exc 0.36 Sqm as in vertical surfaces such as dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in Cement Mortar (1:3) complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like bedded over and including 20 mm thick screed bed in Cement Mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Taking down and refixing of old aluminium door shutter, of area exc 2.0 Sqm but not exc 4.00 Sqm, in same opening after necessary required repairs and fittings including provision of new rubber beadings and glazing clips as required complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed.

S&F in repairs viterous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as specified and directed.

S&F for plastic water closet seat cover, Black in colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair plastic water closet seat cover, Black in colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, including 15mm bore CP fancy type pillar tap, 32mm bore PVC waste coupling with PVC waste pipe ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, including 15mm bore CP brass mixer for hot and cold water, 32mm bore PVC waste coupling with PVC waste pipe ,chain and plug and porcelain stopper but incluing brackets, and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Taking down old damaged cement plaster on brick or stone wall etc incl raking out joints hacking for key & scrubbing down with water etc.complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in Cement Mortar 1:6 including demolition of brick work built in cement motor of any description complete all as specified and directed.

M & L for rendering 15 mm thick in Cement Mortar 1:6 on fair faces of brick wall finished fair & even complete all as specified and directed.

M & L for rendering 15 mm thick in Cement Mortar 1:4 on fair faces of brick wall with mixing WPC as per manufacturer's instruction finished fair & even complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ as supply only.

M & L for rendering 5 mm thick in Cement Mortar 1:4 on concrete surfaces as on ceiling complete all as specified and directed

M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including seggregation serviceable pipes cleaning for re-fixing or removal unserviceable pipes from site complete all as specified and directed.

Re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed. (Serviceable pipes shall be ontained from srl item no. 29 here-in-before for reuse.)

Re-fixing of old steel GI tubing, 20mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed. (Serviceable pipes shall be ontained from srl item no. 30 here-in-before for reuse.)

S&F GI tubing 15mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S&F GI tubing 20mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from over head water tanks of capacity Exc 250 Ltrs but not exc 500 Ltrs and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed.

All as per srl item no. 33.00 here-in-before but of capacity of tank 500 Ltrs but not exc 1000 Ltrs complete all as specified and directed.

Dismantling of old asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings and remove materials from site of work complete all as specified and directed.

Dismantling of old timber scantling 40 sqcm and over in section, in any position as in unframed work and remove materials from site of work complete all as specified and as directed.

Dismantling of timber scantling such as in fillets, rails, runner, rafters, purlins etc under 40 sqcm in section as in framed work and remove materials from site of work complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 1000 litres (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position including light grade over flow pipe 450mm, waste pipe 600mm long with fitting etc. including of 20 mm dia, ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20mm bore minimum weight 210 gms including dismantling / taking out of old water tank of capacity of exc. 500 litres but not exc. 1000 & removing to where directed complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 500 litres (Cylindrical/vertical with closed top), double layer construction, ISI marked, hoisted & fixed in position with and including light grade over flow pipe 450mm, waste pipe 600mm long with fitting etc. including of 20 mm dia, ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20mm bore minimum weight 210 gms including dismantling / taking out of old water tank of capacity of exc. 250 litres but not exc. 500 & removing to where directed complete all as specified and as directed.

S&F 20 mm ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as approved by GE.

S&F in repairs 20 mm ball/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as approved by GE.

Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.

S&F in repair brass chromium plated hand faucet with flexible pipe of length not less than 1.00 M (Minimum) fixed for EWC/ IWC suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair PTMT waste coupling 32x100 mm in size for sink complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair stop valve, 15 mm dia, cast copper alloy, with chromium plated, fancy type with long shank and cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair brass, chromium plated tubular towel rail, 20 mm dia, D type, 60 CM long between flanges, fixed with rawl plugs complete all as specified.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

S&F mild steel rolled section for structural steel work as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-290(Gde-E-165) complete all as specified and as directed. [Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.]

S&F colour coated, pre-profiled (Trapezoidal or High Rib) Galvalume steel sheet, 0.5mm thickness, aluminium zinc coating of 120 gms, top organic coating of polyster paint 16-18 microns over 5-7 mocrons epoxy primer fixed on angle iron bracket with & including self drilling and self tapping screws of appropriate size, sealed with integrated EPDM rebber washer for water tight fixing and side laps to be stiched using Alluminium pop rivets fixed on top of roof complete all as specified and directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

Taking down and refixing of old aluminium window shutter, of area not exc 2.0 Sqm, in same opening after necessary required repairs and fittings including provision of new rubber beadings and glazing clips as required complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified .

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified .

S&F in repair 19mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice laminations and other side balancing white lamination fixed as cub board shutter / kitchen cabinet shutter complete all as specified and as directed.

S&F in repair 25 mm thick pre-laminated particle board interior grade, pre-laminated both side white lamination fixed as in shelves of cub board / kitchen cabinet complete all as specified and as directed.

S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement /adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed. [Make :- Rajshree/Sintex/Polycon]

S&F in repair 18mm thick solid UPVC ply of 1st quality of both side plain white colour, fixed with screwes, solvent cement /adhesive to make kitchen cabinate sides, top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and directed. [Make :- Rajshree/Sintex/Polycon]

S&F in repair 6 mm thick solid UPVC ply of 1st quality of both side plain white colour, fixed with screwes, solvent cement /adhesive to make kitchen cabinate sides, top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and directed. [Make :- Rajshree/Sintex/Polycon]

S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

S & F continuous (Piano) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F 125 mm long, Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S & F in repair 100mm long M.S butt hinges to MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified.

S&F in repair mild steel door spring of size 200 mm long, complete all as specified and all as directed.

S&F in repair fancy type decorated PVC sheathed GI curtain hanging rods 20 mm dia including brackets, including fixing arrangement and all fitting complete all as specified and directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S&F Mild steel Mortice lock double handle, vertical type, 06 levers complete all as spd and directed.

S&F for sheet glass 4.8mm thick ordinary quality in square exc 0.05 complete all as specified.

S & F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) approved quality openable at 110 degree for kitchen cabinete shutter complete all as specified and directed.

S&F stainless steel handles of 100mm long for kitchen cabinate shutter complete all as specified.

S&F fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down suitable for 15 mm bore GI pipe complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type Wall mixer with and including shower & shower arm chromium plated screwed down 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type sink mixer brass chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of fancy type overhead shower with arm swivel joint chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair center hole basin mixer brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware

S&F in repair of vitreous china wash down water closet pan wall hung snow white with extened P trap including vitreous china flush cistern with twin flush and seat cover connection to drain flush pipe and anti syphonage pipe complete all as specified. [Make CERA cat Part No -2035 (CLAIR) for EWC wall hung , cat Part No - 2115,2235 for flush cistern and cat Part No - 2315 for seat cover or Hindware/Parryware as approved by GE

S&F in repair internal fittings Kit complete for vitreous china flush cistern with twin flushof complete all as specified and directed. Make -: CERA Cat Part No - 2115,2235 or Hindware/Parryware as approved by GE

S& F in repair of cera good quality rubber washers for low level flushing cistern complete all as directed.

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and remove materials from site of work complete all as directed.

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) ex 1.5 Sqm but not exc 4.0 Sqm each and remove materials from site of work complete all as directed.

Taking down old shutters of any description area exc 1.00 but n.exc 2.00 sqm each and remove materials from site of work complete all as directed.

Taking down old shutters of any description area n.exc 1.00 sqm each and remove materials from site of work complete all as directed.

S&F plain, solid, straight chowkhats and frames of second class hard wood (Sal), wrought, framed, rebated on the solid, rounded or chamfered, put togather with glue, pinned at joint complete all as specified and directed.

S&F for factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified and directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

S & F for factory made 30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified and directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (b).

S & F for 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F side hung shutter 1.25 mm thick presssed frame steel window with profile 100x40 mm sheet welded with double shutter double leaf of rolled Z steel section as per IS 1038 including MS adjustable peg stay, box type hinges (02 Nos in each shutter), MS handle (01 No in each shutter) welded to frame and 12 mm square guard bar made out of mild steel welded to frame @ 150 mm center to centre both way over and including MS flat 30x5 mm all around the frame complete all as specified and directed.

S&F top hung shutter 1.25 mm thick presssed frame steel ventilator with profile 100x40 mm sheet welded with double shutter double leaf of rolled Z steel section as per IS 1038 including MS adjustable peg stay, box type hinges (02 Nos in each shutter), MS tower bolt of size 100 mm with plate (02 Nos in each shutter), MS handle (01 No in each shutter) welded to frame and 12 mm square guard bar made out of mild steel welded to frame @ 150 mm center to centre both way over and including MS flat 30x5 mm all around the frame complete all as specified and directed.

Taking down old existing shutters of any description, area exc. 1 Sqm but n. exc 2 Sqm each and refixing the same in other opening after necessary easing & adjusting etc complete all as specified and directed.

S&F for 100mm long butt hinge extruded aluminium alloy with galvanised mild steel hingepin, anodised and fixed, complete all as specified.

S&F mild steel butt hinges of size 100 mm, medium weight, cold rolled mild steeland fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolts of extruded section & fixed complete all as specified.

S&F for 150 mm long aluminum handles cast type anodized complete all as specified.

S & F for 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified.

S&F for steel door spring of size 200mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified.

S&F for 250 mm long Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified .

Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified .

S&F for sheet glass 3.0 mm thick ordinary quality in square exc 0.05 complete all as specified.

S&F for sheet glass 3.0 mm thick figured or pin head glass ordinary quality in square exc 0.05 complete all as specified.

M&L for PCC (1:3:6) Type C1 (using 20 mm graded aggre-gate) as in concrete block for hold fast including necessary form work as required complete all as specified and directed.

M&L for mild steel work as in hold fast and other small articles complete all as specified and directed.

S&F 3 mm thick figured or pin head glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

M&L for preparations of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer all as specified and directed.

M&L for applying two coats synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified.

S&F plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 720mm X 600mmx230mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

M&L for cast iron Nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, for following size complete all as specified & directed. (a) 75mm dia

(b) 100mm dia

S&F cast iron soil, waste and vent pipes (Sand Cast) in any length with or without ears, with cement joints and fixed to wall for 75 bore of pipes complete all as specified and directed.

S&F cast iron soil, waste and vent pipes (Sand Cast) in any length with or without ears, with cement joints and fixed to wall for 100 bore of pipes complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal), ordinary or inverted(spigot/socketed type) or with parallel branches with oval access doors for following bore of pipe complete all as specified and directed:- (a) 100mm bore

(b)75 mm bore

Demolition of cement concrete of any description and if any position not otherwise specifically provided for and removing the dismantled material to a distance upto 2.50 KM and depositing where directed.

M&L for 10 mm thick screed bed on fair face of brick wall in cement mortar 1:3 finished even and fair complete all as specified.

Supply only liquid water proofing compound.

M&F for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 kg/ Sqm including cleaning the surface. Complete all as specified.

M&L, for cement concrete 1:7:12 using 40mm graded brick agregate as in filling, ass conc and foundations. Complete all as specified.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs stainless steel drawer telescopic channel of size 500 mm long having load bearing capacity of 35 Kg complete all as specified and directed. Make: Godrej/ Link as approved by GE.

S&F in repairs stainless steel drawer telescopic channel of size 550 mm long having load bearing capacity of 35 Kg complete all as specified and directed. Make: Godrej/ Link as approved by GE.

S&F in repairs stainless steel drawer telescopic channel of size 550 mm long having load bearing capacity of 35 Kg complete all as specified and directed. Make: Godrej/ Link as approved by GE.

S&F stainless steel magnet catcher for the cupboards/cabinet including all necessary fixing arrangements complete all as specified and directed.

S&F front glass shelf 8 mm thick (Chrome finish) of size 300mmx150mm, of design and pattern as approved by GE, fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F corner glass shelf (Set of Three) 8 mm thick (Chrome finish) of design and pattern as approved by GE, fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F for in repair PVC (PTMT alloy) bath room cabinet with mirror completes all as specified. (Make Cat part No. 551 of Pryag/Hindware/Paryware)

S&F plain basket (Stainless Steel) of size 500x375x100, best quality, complete all as specified and directed. Make: As approved by GE.

S&F Stainless Steel perforated cutlery basket of size 500x375x100 mm, best quality, complete all as specified and directed. Make: As approved by GE.

S&F Stainless steel cup saucer basket of size 500x375x100 mm, best quality, complete all as specified and directed. Make: As approved by GE.

S&F Stainless steel Thali basket of size 500x375x100 mm, best quality, complete all as specified and directed. Make: As approved by GE.

S&F stainless steel dustbin holder, best quality, complete all as specified and directed. Make: As approved by GE.

S&F stainless steel detergent rack, best quality, complete all as specified and directed. Make: As approved by GE.

S&F brass, chromium plated soap dish complete all as specified and directed.

S&F for pressed steel frames of size 105x60mm made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed.

S&F for pressed steel frames of size 125x60mm made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed.

M & L for plain cement concrete 1:3:6, type C-o (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frames complete all as specified and directed.

S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for window/ ventilator frame, shutters including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE including aluminium powder coated fittings such as peg stay 150 mm long (1 No), Hing type B-21, 75 mm long ( 02 Nos), suitable handle (01 No) complete all as specified and directed. Notes : - (i) Only weight of aluminium section shall be measured and paid. No claim what so ever shall be entertained by the Govt on this account. (ii) Thickness of section shall not be more than 2mm.

S&F powder coated Aluminium grill with aluminium frame of design and pattern as approved by GE fixed with and including stainless steel screws in ventilators/ door etc complete all as specified and directed.

M&L for rolled steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc for framing of door complete all as specified and directed.

S&F in repair 15 mm dia angle stop valves of PTMT any colour, high pressure, screwed for iron pipe and fixed (minimm weight 90 grams) complete all as specified and directed.

S&F in repair 15 mm dia bib tap, standard of PTMT any colour, high pressure, screwed for iron pipe and fixed (minimm weight 90 grams) complete all as specified and directed.

S&F in repair 15 mm dia pillar tap of PTMT, fancy type, any colour, high pressure, screwed for iron pipe and fixed (minimm weight 120 grams) complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including CP brass screws (Minimum weight 300 grams) complete all as specified and directed.

S&F swivel shower of PTMT, any colour for fixing with 15 mm bore GI pipe (Minimum weight 40 grams) including shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT, any colour (minimum weight 40 grams) complete all as specified and directed.

S&F in repair towel rail, 600 mm long of PTMT with and including brass screws and plastic cleats (minimum weight 190 grams) complete all as specified and directed.

S&F in repairs PTMT waste pipe 32x800 mm for WHB/ Sink complete all as specified and directed.

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

M/s Pal Construction

M/S DHARMENFRA SINGH TOMAR