ADDN /ALTN TO CERTAIN SMQs AT AF STN UTARLAI

Demolition of un-reinforced cement concrete in floors or pavings n. exc. 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.

S&F Coloured ceramic tiles 8 to 10 mm thick joint less (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) with providing of any dark colour border complete all as specified and directed.

All as per Item No 4 above but as in skirting including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed. .

M&L for 18-20mm thick granite (of any type) work, table rubbed mirror and polished as in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed.

M&L for pre-polished machine cut Kota stone as in stair case tread, riser & skriting 20-25mm thick laid over 20mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, bull noseing etc complete all as specified and directed. Note : One stone piece on one trade with nosing one side shall be provided.

M&L for polished machine cut kota stone as in slab flooring 20-25 mm thick single piece of each fread over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed

M&L for polished machine cut makrana white as in shelf, slab flooring 20-25 mm thick single piece of each fread over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed

M & L for Cutting openings, through brick walls for door, window and exhaust fan and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplusserviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

Demolition of cement concrete reinforced of any descrition and in any position not otherwise specifially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs,cooking platform, floor slabs, landings and similar work, flat rought finished surface of concrete to RCC work , complete all as specified and directed.

M&L for RCC nominal mix type B-1, 1:2:4 (20mm graded aggregate) for slabs supported on walls , beams and columns in floors, roofs, landings, balconies, conopies, deck slab and in shelve and the like. complete all as specified and directed.

S&F of precast cement concrete type B1 1:2:4 (20mm graded aggregate, with reinforced as required) as in baluster, apex stones, pier caps, columns , posts of balcony and similar work set in cement mortar 1:4 and finish smooth with using putty and two coats of weather. complete all as specified and directed.

Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles size 300 X 450 X 7-8mm thick on vertical surface over 10mm thick rendering in CM (1:4) as in dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured complete all as specified and directed.

M&L for PCC 1:5:10 (Brick coarse aggregate) filling as in sunken floor / sub base of flooring and similar work including demolition of existing sunkun floor and similar work. Complete all as specified and directed.

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 ltr/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bonding and applying a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt on surface (bottom and vertical) as in sunken floor and similar work. complete all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately .)

S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply only integral water proofing compound.

M&L for PCC 1:1.5:3 Nominal mix concrete type B1 ( Using 20mm graded aggregate) as in lavel course on roof, roof flooring, mass concrete and similar work, finish even and smooth without using extra cement. complete all as specified and directed.

Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitation growth & removing the debris from the premises out side from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.

M & L for 10 mm thick screed bed in cement mortar 1:4 complete mixed with water proofing compound as per manufacturer instructions over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajja / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying bitumen primer @ 0.30 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. (Note:- WPC shall be measured and paid separately)

M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection Complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M/L rendering 15mm thick on concrete surface/stone or brick work in CM 1:4 finished even and smooth with out using extra cement similar work up to G+1 height of the bldg. all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work . complete all as specified.

M&L for rendering 5mm thick in CM (1:3) on concrete surface such as roof projection, chajja, fin & ceiling and similar work up to G+1 height of the bldg, finishing even and smooth without using extra cement complete all as specified.

M&L two coats of oil bound distemper over a coat of primer on newly plastered wall surfaces including preparation of surface and providing 3mm thick wall care putty complete all as specified and directed.

M & L for prepration of newly plastered external surfaces of wall and for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, anti fungal emulsion paint of approved brand and shade over one coat of alkali primer all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed.

M7L for prepration on new plastered or unplastered ceiling surface and applying three coat of white wash up to G+1 height of the bldg. complete all as specified & directed by Engineer-in-Charge

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete.

S&F steel window (box type shutter) factory made with side hung shutters, one side for glazing shutter and other side wire gauge shutters including pressed steel frames (pressed steel frames mild sheet 1.2 mm thick) for window including box type hinges, steel handles, steel peg stay and all locking arrangement complete with gauge and glazing bars dovetailed or welded, with glass pan and wire gauge as per requirment, incl one shop coat of primer, Complete all as specified and directed by Engineer-in-Charge. Note : i) The window shall be fabricated as per sample approved by Engr-In-Charge.

S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 Complete all as specified and directed by Engineer-in-Charge.

S&F steel Ventilators with top hung/side hung shutter including hinges steel peg stay, incl one shop coat of primer, complete all specified.complete all as specified and directed .

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel.

S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised .

S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified.

S&F 150mm long aluminum alloy handles fabricated type, anodized complete as specified.

Taking down frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but n.exc 4 sqm mtr Each incl iron mangery complete.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each .Complete all as spcified.

S & F Stone chowkhats for single shutter with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixedcomplete all as specified and directed

S & F Stone chowkhats for double shutter with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixedcomplete all as specified and directed

S&F for framed work such as rolled mild steel joist, channel, angle, tee section fixed independently, without connecting plates etc (cut to ordinary lengths ) use in framed work, grill, gratings, cupboard shutter, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters, cooler stand and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S&F 2nd class HW 35mm thick panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated on both sides. complete all as specified & directed by Engineer-in-Charge.

S&F 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2st class hard wood). complete all as specified & directed by Engineer-in-Charge

S&F galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed.

S&F 150mm long aluminum alloy handles fabricated type, anodized complete as specified. complete all as specified and directed.

S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy. complete all as specified and directed.

S&F floor door stoper (140mm length) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed to door complete. complete all as specified and directed.

S&F 300 mm ordinary MS rat rail rod pattern spring including roller and roller plate complete

M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer and over one coat of wood putty, complete all as specified and directed.

M&L for preparation of new or untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed.

M&L galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks

Running welding exc 6mm but not exc 9mm (Thickness of metal to be welded), complete all as specified and directed.

S&F factory made PVC (Rigid) door frame for cupboard and kitchen cabinet of the size 75mm x 40mm with a wall thickness of 5mm (+ 0.5mm) made out of extruded PVC (Rigid) sheet of density 600Kg/ cbm manufactured by an ISO-9000 certified company, reinforced with 15mm x 15mm MS square tube of 19 gauge through out the frame, mitre cut at two corners and joined with 2 Nos of 150mm long brackets of 10mm x 10mm square tubes. The door frames shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC (Rigid) fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

S&F factory made PVC shelf / partition of required size, consisting of panel of 18mm (+ 0.70mm ) thick celuka PVC ply and for supporting the hold of shelf / partition and shall provided 3 edges in size 18mm x 18mm as per required length. The front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm x 1mm PVC sheet of density 600 kg / cbm manufactured by an ISO-9000 certified co., using solvent cement etc complete all as specified and directed.

S&F magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) is 30 mm width of flaps (when open) complete all as specified and directed.

S&Fstainless steel handle cast type anodized 150 mm size complete all as specified and directed.

S&F in repair Rotational moulded 3 layers polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl all fitting such as tank nipple/GI fitting incl PTMT float/ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes (Min weight 210 gms)and fixed to iron pipes etc. all as specified in SSR Part I for 500 ltrs capacity incl dismantling of old tank. Complete all as specified and directed. Make: Sintex and equivalent.

Dismantling of cast iron or reinforced concrete drain pipes/PVC pipe 100/75mm dia and under any type, jointed in cement mortar and taking out of trenches if required .

S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. Make:- Nico or equivalent make approved by GE.

S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed. Make:- Nico or equivalent make approved by GE.

S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed.

S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches.

S&F 75mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches.

S&F 100mm bore bend (any radius) with duck foot or heel rest.

S&F 75mm bore bend (any radius) with duck foot or heel rest.

M&L for 15 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches, concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed.

M&L for 20 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches with concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed.

M&L for 25 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches incl taking down old pipe. complete all as specified and directed.

S&F in repairs 20 mm bore Gun metal, globe, gate valves/Ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or for unions. complete all as specified and directed.

S&F in repair stainles steel sink with drainage board made out of stainless steel 1.00mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mmx460mm with bowl size 410mmx330mmx160mm incl waste pipe etc all as specified & directed.

S&F in repairs vitreous china squatting pan , "Orissa" pattern size 595 x 420 mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe).complete all as specified and directed. complete all as specified and directed.

S&F in repairs vitreous china counter type wash hand basin, angle back, size 550x400mm white excluding taps, waste, chain and plug and porcelain stopper including brackets, complete all as specified and directed.complete all as specified and directed.

S&F in repair 600mm X 450mm (5 mm thick) looking mirror decorative type beading of any size of standard quality bevelled edge mounted on 6 mm thick ply wood and fixed with rubber plugs, screws, cup washers, complete all as specified and directed.

S&F PVC low level fushing cistern 10 liters capacity including 32mm dia PVC down pipe,brackets etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated long body pillar tap 15 mm dia cast copper alloy with capstan head , screwed down high presure with or with out lettered fixed with iron pipe, Complete all as specified and directed.

S & F in repair angle/stop valves cast copper alloy chromium plated with long shank , screwed both ends for iron pipe 15mm bore, Complete all as specified and directed.

S&F in repair Chromium Plated wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed

S & F in repair bib taps (long body) cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed, Complete all as specified and directed. .

S&F in repair Chromium Plated kitchen sink mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed .

S&F in repair brass chromium plated shower rose with swivel joint 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed.

S&F of SS Peg stey 6 of set fabricated on SS plate 1mm thick as per sample approved by Engineer-in-Charge.

S&F in repair Chromium plated Towel rail with towel racks of 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190 gms) complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 31"x36"x10" and 1 mm thick , size approved by Engr-in-charge , fixed with galvanised screws. complete all as directed by Engr-In-Charge.

S & F in repair glass shelf assembly consisting of 5.5mm thick glass shelf 150mm wide & 600mm long with chromium plated bracket guard incl Stainless steel 100mm long bracket (one Pair).Complete all as specified and directed.

M&L for 25mm dia stainless steel curtain rod wall thickness 0.9 mm with brackets and knobs at both ends as per site requirement including taking down old existing conduit pipe with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repair 32/40 mm CP waste coupling (half or full threaded) (Min weight 45 to 60 gms) all as specified and directed.

S&F in repairs 32/40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs PVC connection 15mm dia and 600mm long with two Nos of PTMT checknuts and washers complete. All as directed by Engr-in-charge.

M & L preparing old decorated surface of walls and applying two coats of oil bound distemper with 1 mm thick wall care putty to make smooth surface incl complete removal of existing treatment on walls all as specified and directed by Engr-in- charge

M & L for prepration old plastered external surfaces of wall and for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces anti fungal emulsion paint of approved brand and shade over one coat of alkali primer with complete removal of existing treatment, all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed

M&L complete removal of existing treatment of wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying two coat of white wash up to G+1 height of the bldg . complete all as specified and directed.

M&L preparation of old surface of Ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying one coat of white wash up to G+1 height of the bldg . complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying Fosroc Reebaklens RR rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: Reebaklens RR rust rust remover, Nitozinc primer of Fosroc or equivalent in Dr Fixit/ACC/L&T/STP/Sika India /Asian paints/bostik/Choksey chemicals/Thermax limited/ Hindcon Chemicals . (Note : The work shall be carried out upto 12.0 M height)

M&L for providing Micro concrete at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc including necessary form work and scaffolding if required as per site requirmentall as specified and directed. Make: Renderoc RG MICROCONCRETE of Fosroc or equivalent in Dr Fixit/ACC/ L&T/STP/Sika India/ asian paints/bostik/Choksey chemicals/ Thermax ltd/ BASF/Hindcon Chemicals . (Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height)

M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika/Choksey chemicals/Thermax ltd/ CICO as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., complete as per specification and as directed. MAKE: Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik /Sika India/ Choksey chemicals/Thermax ltd/ BASF/Asian paints/Hindcon Chemicals. (Note : The work shall be carried out upto 12.0 M height)

M & L for perparation the surface and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/ parapet /roof projection/balcony/staircase with Fosroc Renderoc SP40 or equivalent including all necessary scaffolding, man and material complete all as specified and directed by Engineer-In-Charge. (Note : The work shall be carried out upto 12.0 M height)

M & L for 20mm to 30 mm thick cement plaster CM 1:3 with added intigral waterproofing compound Fosroc Conplast WL Extra or equivalent in Dr Fixit/ACC/ L&T/STP/Bostik/Sika/ CICO/Choksey chemicals/ Thermax ltd @ 100ml/per 50kg cement bag. thickness not exceeding 20 mm complete all as specified and directed by engr-in-charge. IWC should conforms to IS 2645-2003 and available with ISI standard Mark. Note : The work shall be carried out upto 12.0 M height.

Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description complete all as specifed and directed by engineer-In-Charge. (Note : The work shall be carried out upto 9.0M height)

M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding, including drilling work for inserting TMT bar in wall including filling of epoxy ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.0M height)

M&L for providing leak proof shuttering to RCC member in any position cut to length and providing including runners supports as per manufacturers instructions and including including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.(Note: (i) The work shall be carried out upto 12.00 M height . (ii) The shuttering shall may also be used for column/beam jacketing work.

M&L RCC Nominal mix concretes 1:2:4 type B-1 (20mm graded stone aggregate) as in chajjas, lintel beam,lintel band etc and the like complete all as specified and directed. (Note : The work shall be carried out upto 12.0M height)

Taking down carefully to existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

M&L for Point wiring concealed type with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

One light / Fan / Bell point controlled by one way switch 6/5 Amp .

One light point controlled by two way switch 6/5 Amp .

One 3 pin socket outlet 6/5 Amps on the same board with other switches

One 3 pin 6/5 Amp socket outlet controlled by one switch on independent board

M&L Point wiring of Power point concealed type contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.

S&F switch piano flush modular type (ISI marked), single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F switch piano flush modular type (ISI marked), single pole, two way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F socket multipurpose 5 pin, 6/5 Amp piano flush modular type, 240 Volts complete all as specified & directed.

S&F switch piano flush modular type (ISI marked), single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed.

S&F socket 2 in 1, 3 pin,16/15 Amp piano flush modular type, 240 Volts complete all as specified & directed.

S&F lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

S&F 2 module ceiling rose, surface bakelite, three terminals white colour complete all as specified & directed.

S&F stepped type electronic fan regulator 100 W 2 module type complete all as specified & directed.

S&F Bell push piano modular type 2 module one way 6/5 Amp, 240 volt complete all as specified & directed.

S&F Bell electric AC 240 volt, 50 HZ ding dong complete all as specified & directed.

S&F Light tube light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

S&F wall mounted decorative ornamental type double lamp light fitting complete with driver, holder, LED lamp 6-10W 2 Nos including connecting up with three core flexible copper conductor cable of suitable size complete incl dismentling taking down unsv fitting any type comple all as specified and directed.

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed.

S&F LED inverter lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) complete all as specified and directed .

S&F LED inverter lamp 9 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) complete all as specified and directed .

S&F LED building security light 25 Watt, 230 V new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with high power LEDs as light source with electronic driver and connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable with including suitable bracket as per OEM complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

S&F MCCB DB CRCA sheet powder coated VTPN DB LL 4 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed.

S&F MCB DB CRCA sheet powder coated SPN 8 way (8+2way) double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed.

S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'B' curve incl taking down unserviceable one complete all as specified and as directed.

S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'B' curve incl taking down unserviceable one complete all as specified and as directed.

S&F MCCB 100 Amps, Four Pole, 16 KA, 415 Volt (ICV=ICS) in replacement taking down unserviceable one complete all as specified and as directed.

S&F modular white cover plate with frame 2 module complete all as specified and directed.

S&F single phase motor starter 240 Volt, 50 Hz of capacity 25 Amp suitable of operation of air conditioner upto 2 TR complete all as specified and directed.

S&F modular socket outlet 2 in 1, 3 pin, 25/16 Amp 2 modules, 240 Volts including taking down unserviceable one complete all as specified & directed.

S&F Water Heater (Geyser) storage type 25 Ltr capacity (5 Star BEE rating) including PVC connections 15mm dia for hot and cold water and 3 core copper cable with plug top 15 Amp AC 230 V fixing on existing wall complete all as specified and directed. Note:- Geyser will be fitted with fastners-04 Nos including bolts washers etc and making good disturbed surface.

S&F Exhaust fan of size 300mm sweep, iron/steel body heavy duty with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan including cutting hole in existing brick/block/stone wall for providing suitable opening on wall and fixing on existing wall with fixing arrangements and making good disturbed surfaces complete all as specified and directed.

S&F Exhaust fan of size 250mm sweep, sturdy engineering plastic body with louver single phase suitable for 230 volts 50 Hz and connecting up complete including provision of 3 core flexible cord cable of size 27/0.183 from ceiling rose to connector of fan including cutting hole in existing brick/block/stone wall for providing suitable opening on wall and fixing on existing wall with fixing arrangements and making good disturbed surfaces complete all as specified and directed.

Taking down carefully serviceable ceiling fan, dismentling blades and keep in safe custody in store complete all as specified and directed.

Hanging only ceiling fan and connection up including provisioning of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down carefully serviceable energy meter and keep in safe custody in store complete all as specified and directed.

Fixing only serviceable energy meter upto 25 Amps complete all as specified and directed

S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 15mm bore with and including all fittings such as bends, blbows, tees, short length, socket, union, check nuts, nipples etc complete fixed to wall complete all as specified and directed.

S&F 15mm bore stop cock, cast copper alloy with crutch or butter flyn handle, cromium plated, fancy type (ISI Marked) complete all as specified and directed.

S&F 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, cromium plated, fancy type (ISI Marked) complete all as specified and directed.

S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 20mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. (Note: Exacavation and earhwork shall be measured and paid for separately.)

S&F Bronze gate valve for 20mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1,with expanded metal, with suitable handle made out of cast iron hinged both ends at PCC openable, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 6mm thick cast iron for pit etc & no extra payment will be made.