SPL REPAIR TO MD ACCN BLDG NO P64 AT CIRCULAR ROAD DANAPUR CANTT UNDER GE DANAPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L for Non -Skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 Sqm , in floors etc over and including15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm & not exceeding 0.36 Sqm , in vertical surface such as skirtings, dados etc, over and including 10 mm thick cement plaster in cement mortar 1:4 fixing of wall tile set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

M&L for Non -Skid Ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc over and including15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface even & rough complete all as specified and directed.

M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) in half bricks wall complete all as specified and directed

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete finished even & fair complete all as specified & directed.

M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed

M&L PCC 1:2:4 type B1 20mm graded stone aggregates for insertion of hold fasts including necessary form works complete all as specified and directed.

M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, shelves cover slab for man holes and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick wall in cement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar (1:3) on ceiling finished surface even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

All as per above item No 21.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I complete all as specified and directed

S & F for Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ all as per Srl item No. 26.00 above but without glazing bar

S & F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing with and including, fixing of hold fast size 25 x 5 mm of flat iron etc and over including one coat of primer complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F pressed steel frame of size 105mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

S & F pressed steel frame of size 125mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter & kitchen cupboard shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) complete all as specified and directed.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 100mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F extruded Aluminium alloy handles, fabricated type, anodized 150 mm size comp ISI Marked complete all as specified and directed

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete as directed by Engr-in-charge

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed..

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed

~Ditto~ all as per Srl item No 48.00 above but figured glass. complete all as specified and directed

S&F in repair 18/19 mm thick Block baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete.

S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia complete all as specified and directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Note for item No 56 & 57 (i) CPVC fittings with brass threading will be measured and paid separately under items No (ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, Union etc shall inclusive under the quoted rate of pipe including.

S&F in repair Brass elbow in special fitting items for CPVC pipe outer dia 20 mm complete all as specified and directed

S&F in repair Brass elbow (3/4x1/2) in special fitting items for CPVC pipe outer dia 20 mm complete all as specified and directed

S&F in repair Brass Tee special fitting items for CPVC pipe outer dia 20 mm complete all as specified and directed

S&F CPVC 20 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete.

S&F CPVC 20 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete.

S&F CPVC 20 mm Outer dia Brass Tank Adoptor complete.

S&F CPVC 25 mm Outer dia Brass Tank Adoptor complete.

S&F CPVC 20 mm Outer dia Brass Union complete.

S&F CPVC 25 mm Outer dia Brass Union complete.

S&F in repair vitreous china wash hand basin size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets mild steel with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC) complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl low level PVC pipe 32 mm dia complete all as specified and directed .

S&F in repairs PVC connections 15 mm dia size and 450mm long with 2 Nos check nuts its washer complete all as specified and directed.

S & F in repair of 15 mm bore cast copper alloy chromium plated Mixer for mixing HOT & COLD water screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy, chromium plated , screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

Supply and fixing in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Brass CP towel rail 20mm dia `D' type 60 cm long between flanges complete all as specified and directed.

S&F in repairs stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed.

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair of stainless steel soap dish, of standerd size and shape complete all as directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.

S & F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900x750x220 mm size fixing with wooden plug with suitable size of screws complete all as specifiedand directed.

S & F in repair chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or union complete all as specifiedand directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specifiedand directed..

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) incl necessary form work complete all as specified and directed .

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F MS TMT bars, 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F PVC (SWR) pipes 50mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

~Ditto~ all as per Srl item No 98.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete all as specified and directed..

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and complete all as specified and directed..

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Removing old paints by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M & L for two coats of oil bound distemper on new ceiling over a coat of primer of surfaces complete all as specified and directed.

M & L for two coats of oil bound distemper on old ceiling over a coat of primer of surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed .

Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

M&L for two coats of weather coat paint over a coat of primer on new/old surfaces on wall including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

M&L PCC type C2, 1:3:6 (40 mm graded stone aggregate) as in sunken slab filling complete all as spd and as directed

M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding levelling course for maintain to proper slope of roof incl necessary formwork etc complete all as specifed and directed.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed. (i) Properly cleaning and drying concrete surfaces to receive the new treatment. . (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (v) Applying two coat of bituminous aluminium paint @ 200 gm/ Sqm over & incl a coat of hot air blown grade bitumen of grade 85/25 @ 1.2 kg/ sqm duly sanded over polymeric membrane complete

Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxes and making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

Ditto- all as item No. 128 here-in-before but for one light controlled by two way switch

Ditto- all as item No. 128 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed.

Ditto -all as item No. 128 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 2.5 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 4.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 4.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x2.5sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 2.5 sqmm including PVC conduit shall be measured as unit length.

S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.

S & F for switch piano, flush type, 5 amps, single pole , two way , 230 volt complete all as specified and directed.

S&F switch socket combination 3 pin 5 Amps multipurpose type 240 volts complete all as specified and directed.

S & F bell push switch 5 Amp flush type complete all as specified and directed.

S & F for 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S & F for bell, ding- dong , AC, 230 Volt, single pole complete all as specified and directed.

S&F lamp holder PVC/Polycorbonate type with cord grip cap/back plate suitable for batten/angle /pendent fitting complete all as specified and directed.

S&F LED retrofit lamp of capacity 12/15 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.

S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed.

S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning

S& F for sheet metal enclousre factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed.

S&F Isolator/MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.

S&F Isolator SPN 40 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cables etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supplying ,laying, commissioning & testing cross sectional area 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old /unserveciable cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item

S &F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstanding including taking down existing pipe complete all as specified and directed.

M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.

Supply and laying dry well burnt locally available brick sub class 'B' bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

M&L for drilling through bore hole by trenchless technology without disturbing the existing road or hard surface all as directed.

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans.

S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.

M&L for taking down the existing ceiling fan for servicing, greasing, replacement of bearing, safety pin, canopy, fan condensor, clamp, rubber reel, nut/bolts reqd at site and cleaning and preparing surface, fillng cavaties with filler including painting with one coat of synthetic paint including down rod of approved white colour and refixing in its original position all electric connection all as specified and directed.

HARINANDAN RAI SONS (BID ID -3085274)

SINHA CONSTRUCTION (BID ID -3085768)

M/s Naresh Chand Agrawal (BID ID -3081981)

M/S SAROJ KUMAR SINGH (BID ID -3085042)

M/S Priya Trading Agency (BID ID -3083953)

jaglalchoudharyandsons (BID ID -3086997)

MS BIJAY KUMAR AND SONS (BID ID -3086751)