REPAIR REPLACEMENT OF FENCING, GATE, FOOTPATH, HARDSTANDING AND OTHER CONNECTED WORKS

Amount

S&F of mild steel section (Angle, channel, flat iron) as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by Engineer-in-charge.

Dismantling posts or struts (wood, steel or R.C.C.) of any section, embedded in concrete including taking out embedded portion and making good disturbed ground, complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete, including necessary formworks, complete all as per specified and as directed by Engineer-in-charge.

M&L for Providing Cement Concrete 1:2:4, type B-1 (20mm graded aggregate) as in Coping, edging, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), demolition of existing old unserviceable concrete, complete all as specified and as directed by Engineer-in-charge.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains, including necessary formwork, demolition of existing old unserviceable concrete, complete all as specified and as directed by Engineer-in-charge.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends, complete all as specified and as directed by Engineer-in-charge.

Add to or Deduct from Item No. 08 here-in-before for Every 25mm Girth or Part thereof Over or Under 30 Cm, complete all as specified and as directed by Engineer-in-charge. Note:- Quantity of this item shall be changed as per site requirement.

M&L for Brickwork with Fly ash bricks, straight or curved on plan to any radius built and set in cement mortar 1:6, incl demolition of existing B/W,complete all as per specified and as directed by Engineer-in-charge.

M&L for Brick work in lining in drains laid flat, with sub class 'B' bricks, Bedded and jointed in CM 1:6 and pointed in CM 1:3, incl demolition of existing B/W, complete all as specified and directed by Engineer-in-charge.

S&F of 11-15 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, complete all as specified and as directed by Engineer-in-charge.

S&F in-repair of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc.(each line wire to be measured), complete all as specified and as directed by Engineer-in-charge. NOTE: Cost of GI Binding Wire shall deem to be included in the quoted Unit Rate.

All as per Item No. 13 here-in-above, but for fixing only in-repair, complete all as per specified and as directed by Engineer-in-charge. NOTE: Cost of GI Binding Wire shall deem to be included in the quoted Unit Rate.

Restraining, resecuring of of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings fixing to any type of standard rails straining bolts, tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc.(each line wire to be measured), complete all as specified and as directed by Engineer-in-charge. NOTE: Cost of GI Binding Wire shall deem to be included in the quoted Unit Rate.

S&F in-repair of 4.0mm dia GI Chain Link Fencing of 100x100mm Mesh to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed by Engineer-in-charge. NOTE: Cost of GI Binding Wire shall deem to be included in the quoted Unit Rate.

S&F of 10mm dia mild steel Tie bars cut to length, bent to shape required, including cranking, bending as in stiffner to chain link fencing, conforming to Fe- 290 Gde-E-165, complete all as specified and as directed by Engineer-in-charge.

M&L for providing glossy finished PU coated Chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors., laid over 20mm thick cement screed 1:6 with grey cement and pigments to match, including dismantling the existing old unserviceable tiles of any type and of any description, complete all as per specified and as directed by Engineer-in-charge.

M&L for providing 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in floor/ path/ hardstanding/plinth protection, etc. or similar works, laid in altenate bays including use and waste of form work and finishing concrete surfaces even and fair and demolition of existing old unserviceable concrete, complete all as per specified and as directed by Engineer-in-charge.

M&L for providing Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, with grey cement and pigment, including dismantling the existing old unserviceable paver block of any type and of any description, complete all as per specified and as directed by Engineer-in-charge.

M&L for providing 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub-base of floor/ path/ hardstanding/plinth protection, etc. or similar works, laid in altenate bays including use and waste of form work and finishing concrete surfaces even and rough, including demolition of the exisiting old PCC, complete all as per specified and as directed by Engineer-in-charge.

M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint of any shade over a coat of alkali-resistant priming paint, complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously un-treated steel/iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of Synthetic enamel paint (1st quality) of any tint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously un-treated steel/iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of Synthetic enamel paint (1st quality) of any tint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-charge.

M&L for Rendering 15mm thick in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement), complete all as specified and as directed by Engineer-in-charge.

M/S Rajkamal Enterprise (BID ID -3074740)

M/S KMY ENTERPRISE (BID ID -3074093)

M/S K NATH AND CO. (BID ID -3073980)

M/s Narzary Enterprise (BID ID -3073656)

M/S TANISHQ CONSTRUCTIONS (BID ID -3074719)