MISC electrical works at Old Guest House in IITG Campus

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

a). Group B

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a). 5/6 A switch

b). 16 A switch

c). 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

a). 4 Module (125mmX75mm)

b. 12 Module (200mmX150mm)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a). 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b). 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c). 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire

d). 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed Conduit as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a).Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

a).Upto 35 sq. mm

Erection of metallic pole of following length in concrete 1:3:6 (1Cement: 3Coarse Sand:6 Graded stone aggrete 40mm nominal size) foundation including excavation and refilling as required.

a). Above 4.5mtr and upto 6.5mtr

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

a). 32 mm dia

Suppy of 100mm dia medium class GI pipe suitable for mounting post top lantern light fittings

Supply of 3C 2.5 Sq.mm AL flexiable cable. (Make-KEI/Havells/RR Kabel/Finolex/Polycab)

Supply of 18watt surface mounted square/round LED panel light having PDC aluminium housing, high translucent frosted plastioc diffuser, natural white and efficacy not less than 100lm/W.(Make-CG/Philips/Havells)

Supply of 60watt surface mounted bottom opening LED cleanroom luminaire (1X4) CRCA powder coated housing withh SS frame and efficacy not less than 100lm/W.(Make-CG/Philips/Havells/HPL)

Supply of 150watt LED flood light made up of pressure die cast aluminium housing with toughened glass, IP66 protection, SPD 10KV and efficacy more than 100 lm/W. (Make-CG/Philips/Syska/Havells)

Supply and fitting of bakelite hylam sheet suitable for covering VTPN distribution board as required.

Supply of 3core, 6 Sq.mm Al armoured UG Cable. (Make-Havells/RR Kabel/KEI/Finolex/Polycab)

Supply of 40watt LED post top lantern with die cast aluminum graphite grey power quotaed spigot, acrylic clear diffuser having minium efficacy more than 90 lumen/watt, operating voltage range 140-280V AC. (Make-Bajaj/Philips/Havells/Jaquar/Syska/CG)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

a). 50 mm dia

Supply and installation of SMC junction box with 6Amp MCB. (Make-Sintex/Hensel or equivalent)

M/S ANUSHREE CONSTRUCTIONS & ASSOCIATES