Extension, Renovation and Modernization of BLTEC, Th.Rampur in Kalahandi District

Excavation,loading,unloading and carriage by mechanical means of all kinds of soil,including stoney earth,gravels and moorum etc interspread with boulders up to .5cum size with all lifts and delifts including trimming of the slopes and bed to design section and depositing the excavated materials away from the work site as per specification and as directed by the E-I-C within an initial lead of 1 km from the place of excavation complete

Transportation of earth from 5.0Km lead including Royalty of Earth

Fitting vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles

Fitting vitrified tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles

Supplying and fixing of MS window grill and grill gate including cost of fabrication and cost, conveyance, taxes etc. complete.

Priming one coat with any approved red oxide over iron work

Painting 2coats with any approved iron paint on new iron work.

Providing, fitting and fixing of false ceiling with 12 mm thick gypsum board, Aluminium anodised T Section No. 3215 with 2'-0" centre to centre, L section No. 1705 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2'-0" x 2'-0" suspended from ceiling etc. complete.

Supplying, fitting & fixing in position & drawing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC.

PH Works

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge.

15 mm dia PVC Pipe

20 mm dia PVC Pipe

25 mm dia PVC Pipe

32 mm dia PVC Pipe

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CPVC pipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints complete as per specification and direction of the Engineer -in-charge.

25 mm dia CPVC Pipe

Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge.

Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge.

Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm. for taking CPVC pipe s and making good the damageswith cement voncrete (1:2:4) as per specification and direction of the Engineer -in-charge.

Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge.

1000 liter capacity Syntex/FC Tank

Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete.

Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythine pipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testing as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge (Earth work in trenches measured separetly).

110 mm dia H.D.Pvc Pipe

Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer inchargr.

580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make)

Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan)Parryware make with Integral"S" or "P" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover)

White Vitreous China EWC Pattern with "P" Trap

Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. .

10 Liters P.V.C.low level Flushing Cystern

Supplying all materials,labour T &P Fitting of Plastic Seat and cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. .

White Plastic Seat &cover with CP Brass Hinges

Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urina(Parryware make)l conforming to IS 2556: Part 6-1996 including connectiont the Urinalof Angle back 450x375x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge

Virtious China -Angle Back Urinal of 430mm x 260 mmx 350 (Parryware/Hindustan)

Porcelain Counter Top Basin Oval Shape (450x400)Parryware make

CP Brass Towel Ring

Internal Electrification

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Group-A

Group-B

Group-C

Supplying and fixing of 5/6 amp one way modular type switch on existing switch box/cover including connections etc as required.

Supplying and fixing of 5 pin 5/6 amp socket outlet modular type on existing switch box/cover including connections etc as required.

Supplying and fixing of 15/16 amp one way modular type switch on existing switch box/cover including connections etc as required.

Supplying and fixing of 6 pin 15/16 amp one way modular socket outlet piano type on existing box/cover including connections etc as required.

Supplying and fixing batten holder/BK angle holder ISI marked including connection etc. as required.

Supplying and fixing of 25 mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required

Installation,TestingandCommissioning of pre-wired fluorescent fiiting /compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. 20W Tubelight

Installation, testing and commissioning of ceiling fan ( 48" decorative), including wiring the down rods of standard length (up to 30 cm) etc. as required.

Installation, testing and commissioning of stepped type modular fan regulator, in existing switch box including connection with 1.5 sq. mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.

Installation,TestingandCommissioning of pre-wired fluorescent fiiting /compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. Flood Light

Please Enable Macros to View BoQ information