Construction of AE/O and M/ Thedavoor Section office building at Thedavoor 110/22 KV SS Premises in SEDC.

Amount

Clearing Juliflora jungle with uprooting as directed by the Engineer at site including lead, lift,etc.,complete.

Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.a) Hard gravelly soil 50%

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.b) Soft disintegrated rock 20%

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.c) MR & DMR not requiring blasting 15 %

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.d) Removing Hard rock by wedging & chiseling 15%

Supplying and filling the M sand for filling in the foundation and basement including cost of M sand, filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain Cement Concrete 1:3:6, using 40mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specifications and as directed by the departmental officers.

Plain Cement Concrete 1:2:4, using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specifications and as directed by the departmental officers.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Column up to ground level and above GL including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Supplying and erecting Steel centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Raft beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Refilling using the site excavated earth in foundation and basement or wherever necessary in 150mm thick layers, well rammed including filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Filling the around low laying area alround in section office building outside and raising basement using the gravel in 150mm thick layers, well rammed including filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

Providing Anti-termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below, including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Brick work in CM 1:5 using class II bricks for super structure and septic tank, including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Brick work in CM 1:3 using class II bricks for partition wall and others including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Sunshades of 600 mm with 80 mm thick at wall and 50 mm thick at free end including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Elevation Sunshade of 1000 mm with 100mm thick including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing Steel reinforcement MS/RTS rods for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Wall Plastering 1:5, 12 mm thick on both sides of country brick wall after electrical piping work including the cost of all material, scaffolding charges, cement, labour charges, all leads, lifts, as per standard specification.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick including finishing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.(For Septic Tank)

White washing two coats for Ceiling with approved quality of White cement including cost of all materials, labour, leads & lifts and as directed by Engineer at site.

Painting the Outer wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting two coats ( Inner Side ) of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing the corner PVC beading in dadooing the walls using ceramic tiles etc., complete

Weathering course with PCC 1:1.5:3 using 6 mm HBG stone over R.C.C. roof slab, for required depth of 80 mm for giving required slope and thickness to roof as required and laying one course of cooling tiles of 30 cm x 30cm x 7 mm size using CM 1:3,and pointed with the white cement including cost of cement, all materials, labour, curing, all leads and lifts, etc., complete as per standard specification.

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supplying and fixing of FRP Door frame made out of country wood of size 100mmx75mm and Flush shuter of 30mm thick including cost of necessary fittings,Labour Charges for put up for doors in position etc.

Supplying and fixing of New PVC door with frame in the building including cost of all materials, lead, lift, transport, labour charges etc, complete as directed by Board Engineer at site.

Supplying , fabricating and fixing in position Aluminium Anodised natural colour matt finish Two track sliding window in all floors with Aluminium sections of outer Frame bottom 62x37mmx1.50mm at 1.218 kg/m,the Side & Top 62x31.50x1.50mm at 0.778 kg/m,Shutter Top 40x18x1.5 at 0.38 kg/m,Bottom 40x18x1.5 at 0.38kg/m, Side Vertical 40x18x1.50mm at 0.493 kg/m, Vertical locking section 40x29x1.5mm at 0.632 kg/m, with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC column, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing and also as directed.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete.

Supplying, fabricating and fixing in position Aluminium anodised natural colour matt finish louvered ventilator size 600mm x 600 mm of with outer frame section with 62x38x2mm at 1.174 kg/m and the louvered with moving arrangements made with aluminium channel of size 60x30x4mm @ 1.274 kg/m Aluminium clips 19.05x17.27/ 11.05x0.075mm @ 0.169kg/m with necessary 4mm thick plain glass panel for louvers including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC, masonry and made good to the original condition after fixing etc., complete. The Aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 for anodic film thickness of not less than 15 Microns,etc., complete.

Supplying and fixing window Grill using MS Square Rod of required size including cost of all materials labour charges for fabrication and fixing lead and lift etc complete.

Supplying and fixing white glazed earthen ware water closet colour of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying & fixing in position of European water closet with P or S trap with double flapped seat andseat cover with brass hinges and 10 litre capacity PVC low level flushing tank with all internal fittings & accessories inculding cost of all materials,transporting ,leads and lift etc. complete

Supplying and fixing white glazed earthen ware Colour Hand wash basin of size 550x400mm reputed make with cast iron brackets, 32mm CP waste coupling rubber plugged chain 15mm GM wheel valve, Nylon hose connection, materials, lead, lift, transporting, labour charges etc., complete as per standard specification.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works)

Supplying and fixing best approved best quality Procelain CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works)

Supplying and fixing locking arrangements with lock 6 levers with 3 keys Godrej Navthal or any other approved good quality lock of reputed make including cost of all materials, labour, lead, lift, etc complete., as per standard specification.

Supplying and fixing of 2000 Litres P.V.C. Water tank of approved quality including cost of all materials leads and lifts etc., complete and as directed by Engineer at site.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position Stainless steel health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.a) 110mm dia PVC Pipe-6kg/ cm2

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.b) 75mm dia PVC Pipe-6kg/ cm2

Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.c) 40mm dia PVC Pipe-10kg/ cm2

Providing and fixing Air ventilating shaft of PVC pipe 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing 110 mm dia PVC Door Tee of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator).

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and the celling with PVC accessories in flush with wall with suitable flush type TW switch box to house the control switch and regulator, and covered with 3 mm Thick Hylem sheet with continuous earth wire connection of 14 SWG TC wire making good of the concealed portion with suitable colour for concealed fan point with (For rheostatic type fan regulator).

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point.

Supply and fixing 20W LED tube light Fitting Philips make or equivalent type on wall or ceiling.

Supply and fixing the 42 watts LED street light fitting with pipes , leads etc., Philips make or equivalent type.

Supply and fixing of Down Light fitting (Philips / Bajaj / K.Lite / Crompton Greaves/pasolite) suitable for incandescent lamp with guard and 9 W LED bulb.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300w regulator with 600mm down rod on the existing clamp.

Supply and fixng of TNEB Moter Board suitable for 3 Phases 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work with PWD earthing.

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.

Supplying and filling 40mm gauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu