Providing false ceiling, wall panelling, flooring with necessary Electrical works for the conference rooms in ACTE Lab., and AM Lab., in CSIR-SERC, CSIR Campus, Taramani, Chennai-600 113.

Amount

Part - A ((i) ACTEL Lab Civil work) Providing and fixing venner partition on existing wall surface by providing 3" thick with second class teak wood frame work of size 2'' X 2" to form a box of size 2' x2' in vertical and horizontal plane and applying wood primer on the frame work and wall panelling of 8mm thick commercial ply (make -Century/sharon/BWR 303Grade) on frame work, The exposed surface of wall panelling should be pasted with fevicol with 4mm thick OST century make venner (colour as approved by Engineer in charge) and polishing the veneered surface with sheelar i/e patch fillingand with varnishing with two or more coats Melamine polishing (asian Make) matt finished using gun spary machine etc. complete as per the direction of Engineer-in-charge

Providing and fixing mineral fibre false ceiling tiles at all heights ofsize 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should reston periphery walls /partitions with the help of GI perimeter wall angleof size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) Armstrong board black sillout frme

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.

Removing old door and providing new flush door of 25mm water proof ply door over that Providing and fixing 4mm thick century veener of wood grains of approved shade on both sides, providing door fixtures like heavy weight brass hinges. Polishing the veenered surface with sheelar i/e patch filling and with varnishing with two or more coats of Melamine finish. The rate is inclusive of providing 2nd class teakwood lipping alround

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Froasted glass (5.5 mm thick glass panes)

Supplying and fixing Doorma H Handle of 300mm size etc., all as per instruction of engineer-in-charge

Supplying and fixing Doorma Door dead Lock( Code 706) etc., all as per instruction of engineer-in-charge

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

Supplying and fixing Doorma Door Closer double speed etc., all as per instruction of engineer-in-charge

Supplying and fixing Brass Door Sliding Tower Bolt etc., all as per instruction of engineer-in-charge

Supplying and fixing of roller blinds are made out of polyster imported fabric (washable) with dustguard treated to repel dust, free from stain water and oil repellant.Top frame must be with Aluminium rail with powder coated. The imported wheels at the end made of polycarbonate for smooth movements. etc., all as per instruction of Engineer in-charge

UPVC WINDOWS Supplying and fixing of Uunplasticised poly vinyl chloride frame of approved make/ colour with casement 6T+12T+6T thk DG Insulated toughen glass. The gasket should be made of EPDM (Ethylene propylene dimnomer) with double gasket sealing and applying silicone sealents outside andacrlyic inside. The section should be reinforced with GI sheet of 1.5mm thick with suitable drainage grouting including all necessaryhardware fittings etc., all complete as per architectural drawings and the Engineer in charge. Openable luxury casement windows of Profile outer frame thick 65mmx 58mm Fenesta Make (1800x1400mm)

Part - B ((i) AM Lab Civil work) Providing and fixing venner partition on existing wall surface by providing 3" thick with second class teak wood frame work of size 2'' X 2" to form a box of sixe 2' x2' in vertical and horizontal plane and applying wood primer on the frame work and wall panelling of 8mm thick commercial ply (make -Century/sharon/BWR 303Grade) on frame work, The exposed surface of wall panelling should be pasted with fevicol with 4mm thick OST century make venner (colour as approved by Engineer in charge) and polishing the veneered surface with sheelar i/e patch fillingand with varnishing with two or more coats Melamine polishing (asian Make) matt finished using gun spary machine etc. complete as per the direction of Engineer-in-charge

Providing and fixing mineral fibre false ceiling tiles at all heights ofsize 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should reston periphery walls /partitions with the help of GI perimeter wall angleof size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) Armstrong board black sillout frame

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bomboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.

Removing old door and providing new flush door of 25mm water proof ply door over that Providing and fixing 4mm thick century veener of wood grains of approved shade on both side, providing door fixtures like heavy weight brass hinges. Polishing the veenered surface with sheelar i/e patch filling and with varnishing with two or more coats of Melamine finish. The rate is inclusive of providing 2nd class teakwood lipping alround

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :

Froasted glass (5.5 mm thick glass panes)

Supplying and fixing Doorma H Handle of 300mm size etc., all as per instruction of engineer-in-charge

Supplying and fixing Doorma Door dead Lock( Code 706) etc., all as per instruction of engineer-in-charge

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

Supplying and fixing DormaDoor Closer double speed etc., all as per instruction of engineer-in-charge

Supplying and fixing brass Door Sliding Tower Bolt etc., all as per instruction of engineer-in-charge

Supplying and fixing of roller blinds are made out of polyster imported fabric (washable) with dustguard treated to repel dust, free from stain water and oil repellant.Top frame must be with Aluminium rail with powder coated. The imported wheels at the end made of polycarbonate for smooth movements. etc., all as per instruction of Engineer in-charge

Part - A((ii) ACTEL Lab Electrical work) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

e) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

f) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

g) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

h) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 3 x 1.5 sq. mm

b) 3 x 2.5 sq. mm

c)3 x 4 sq. mm

d) 3 x 6 sq. mm

e) 6 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess with suitable MS clamps to be fixed on the hallow square section purlin including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 amps switch

b) 15/16 amp switch

c) 3 pin 5/6 amp socket outlet

d) 6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

c) 4 Module (125mmX75mm)

d) 6 Module (200mmX75mm)

f) 12 Module (200mmX150mm)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way, Double door

b) 12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

b) Double pole

c) Triple pole

d) Triple pole and neutral

Labour charges for removing the old PDB,LDB,FDB,existing Tube Light fittings and old switch box, MS conduit pipe wiring from ceiling and wall and handover to electrical maintenance department etc., as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

LED 2'x2' Office Luminaire. Supply, Installation, testing and commissioning of recessed mounted aluminium housing, prewired with driver Anti glare LED 2'x2' made up of CRCA sheet powder coated housing with diffuser, complete with all accessories etc., to be mounted in the existing false ceiling with suitable clamps & chains for fitting the same rigidly as required as per site condition, including connection with 1.5sqmm FR PVC insulated, copper conductor, single core cable and earthing etc.as required at site. Make : philips. RC140B LED31S-6500 PSE WH 240V 50HZ

LED Down Light : Supplying and fixing Anti glare LED based down lighter of min 9 W made up of aluminium die cast/polycarbonate housing body with suitable suspending system having dia in the range of 125-200 mm dia conceled light to suit the existing false ceiling as per site condition as required. Make : CG/Moserbaer/SRM/Osram/philips.

Supply and fixing of 400 mm wall mounted fan in a suitable wall bracket,similar to 'Wall 44' Model in Orient or equivalent as approved by department complete in all aspects as required.

Part - B((ii) AM Lab Electrica work) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

e) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

f) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

g) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

h) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 3 x 1.5 sq. mm

b) 3 x 2.5 sq. mm

c)3 x 4 sq. mm

d) 3 x 6 sq. mm

e) 6 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess with suitable MS clamps to be fixed on the hallow square section purlin including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 amps switch

b) 15/16 amp switch

c) 3 pin 5/6 amp socket outlet

d) 6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

c) 4 Module (125mmX75mm)

d) 6 Module (200mmX75mm)

f) 12 Module (200mmX150mm)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way, Double door

b) 12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

b) Double pole

c) Triple pole

d) Four pole

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

aa) 8 way (4+24), Double door

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

LED 2'x2' Office Luminaire. Supply, Installation, testing and commissioning of recessed mounted aluminium housing, prewired with driver Anti glare LED 2'x2' made up of CRCA sheet powder coated housing with diffuser, complete with all accessories etc., to be mounted in the existing false ceiling with suitable clamps & chains for fitting the same rigidly as required as per site condition, including connection with 1.5sqmm FR PVC insulated, copper conductor, single core cable and earthing etc.as required at site. Make : philips. RC140B LED31S-6500 PSE WH 240V 50HZ

LED Down Light : Supplying and fixing Anti glare LED based down lighter of min 9 W made up of aluminium die cast/polycarbonate housing body with suitable suspending system having dia in the range of 125-200 mm dia conceled light to suit the existing false ceiling as per site condition as required. Make : CG/Moserbaer/SRM/Osram/philips.

Supply and fixing of 400 mm wall mounted fan in a suitable wall bracket,similar to 'Wall 44' Model in Orient or equivalent as approved by department complete in all aspects as required.

Labour charges for removing the old PDB,LDB,FDB,existing Tube Light fittings and old switch box, MS conduit pipe wiring from ceiling and wall and handover to electrical maintenance department etc., as required.

KARTHIK WOOD INDUSTRIES