A/R and M/O to Non residential building at Kasumpti Shimla

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 9 mm thick

Providing and fixing with 4mm thick Teak ply in the door shutter panel including fixing of beading with nail/screws as required in all respect as per Architectural Drawing/design and instruction of the Engineer-in-Charge.

Providing and fixing 19mm thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(ii)1st class teak wood.

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 6mm (Six milimetre)thick

Providing and fixing magnetic Catchers ISI marked with necessary screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing cupboard handles, ISI marked, with necessary screws etc including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge. (i) 125 mm dia.

Polishing two coats with P.U polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Appling sealar on wood and wood based surface to given an even surface including cleaning the surface of all dirt,dust and sand papering so as to produce a smooth dry abd matt surface including stopping & Knotting.

Wall painting (One or more coat) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (i) For fixed portion (a)Powder coated aluminium (minimum thickness of powder coating 50 micron)

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fitting shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc complete as per the architectural drawings (Cost of aluminium snap beading shall be paid in basic item) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i)Glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm)

Providing and fixing 5mm thick in ACPP Sheet for doors windows ventilator shutters and partition etc with PVC/neoprehes gasket etc complete as per the architetual drawings and the direction of Engineer-in-Charge. Cost of aluminium srap beading shall be fixed in basic item.

Providing and fixing Antique Brass sliding door bolts with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 300x16mm

Providing and fixing Antique Brass tower bolts complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)200x10mm

Providing and fixing oxidized M.S handle with necessary screws etc.nail complete 125 mm

Providing and fixing corner (beading ) 25x25 section i/c mitring at junctions with screws and nails complete. (i) 1st class Deoder wood

Providing and fixing round cover fillets (beading) 19 mm section i/c mitring atr junctions with wood screws and nails complete. (i) 1st class Deoder wood .

Providing and fixing fly proof glavanised M.S wire gauge of IS gauge designation 140 G with wire of dia 0.71 mm to window and clerestory window including 60x20 mm beding (a) 1st class Indian teak wood