SPECIAL REPAIRS TO COMPOUND WALL AT GLOBE AREA AND SBI LINE PROVN OF INTERLOCKING TILES NEAR BLDG NO BC 77 OF THE MARATHA LIRC BELGAUM PROVN OF PROTECTION WALL BEHIND CBT HALL OF THE MARATHA LIRC BELGAUM PROVN OF COVERED SHED ALONGWITH ALLIED WORKS N

Amount

Demolition of Plain cement concerete in ground floors and paving not exceeding 15 cm thickness (below or above GL) and removing rubbish off the premises complete. all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, precast concrete articles etc and removing rubbish off the premises and old unserviceable PCC Blocks/bricks taken as credit complete. all as specified and as directed.

Material and labour for Plain Cement Concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc complete. all as specified and as directed.

Material and labour for Providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary form work etc complete all as specified and as directed .

Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips etc complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 complete all as specified and as directed

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc and removing rubbish off the premises complete. all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, surface finished even and fair without using extra cement complete all as specified and directed.

Material and labour for Preparation of new or previously untreated surfaces of walls etc and applying two coats of cement base paint over one coat a of alkali resistent primer complete all as specified and directed.

Material and labour for broken glass coping on top of walls in cement mortar 1:3 etc complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averagig 15cm deep and getting out in hard/ dense soil complete all as specified and asdirected.

Removing excavated materials/soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and asdirected.

Material and labour for hard core with broken stone or boulders of gauge n.exc 63mm, deposited, spread, levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg) as in sub-base of floor, 100mm thick including necessary form work complete all as specified and as directed..

Material and labour for Machine pressed concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment complete all as specified and as directed.

Material and labour for Sand cushion, filling under paver block path way including spreading ,levelling , watering and consolidation complete all as specified and as directed .Note Consolidated thickness will be measured for payment .

Excavation over areas not exceeding 1.5 metre deep and getting out in soft / loose soil complete all as specified and as directed

Returning, filling in approved earth obtained from excavation including spreading, levelling watering and well ramming in layers not exceeding 25 cm in foundation etc complete all as specified and as directed

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make of UPVC Pipe : Finolex/Supreme .

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.

Material and labour for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Excavating in post holes each n exc 0.5 cum, getting out in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing surplus soil to a distance nexc 50 m and making good surfaces complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:2:4 ) type B2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc complete. all as specified and as directed.

Supply and fix Rolled Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed .

Supply and fix 5 mm thick Rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 complete all as specified and as directed.

Supply and fix Mild steel screw bolts (machine made) of 11 mm to 15 mm dia with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exceeding 10 cm but not exceeding 15 cm long complete all as specified and as directed.

Supply and fix Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etccomplete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Aluminium composit panel board fixed over existing wooden/steel frames with necessory frame work with screwing and scaffolding complete all as specified and as directed.

Supply and fix UPVC eaves gutter trapezoidal type with thickness of sheet 1.0mm including necessary fitting, etccomplete all as specified and directed.Note :Make :Finolex/Supreme

Material and labour for 100mm thick Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base for flooring including necessary form work complete all as specified and as directed .

Material and labour for 100mm thick Plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base for flooring including necessary form work complete all as specified and as directed .

Material and labour for Premium quality Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishescomplete all as specified and as directed.Note :Make of ceramic tile :HR Johnson/Khajaria/Naveen

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound. Make :Impermo/Roff/Cico

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) pipes , single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Note :Make :Finolex/Supreme

Material and labour for Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in hard/ dense soil for foundation/ laying cables/ pipes, etc. complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (40mm grade stone aggregate ) as in cement concrete in surface channel and drain including necessary form work complete all as specified and as directed.

Extra for forming fair finished drains or channels 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

.Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Material and labour for Coloured Glazed ceramic tiles of size 300x450x7 mm/ 350x250x7mm thick on vertical surfaces such as dado, skirting etc set jointed and pointed in neat cement slurry and pointed in coloured cement to match the shade of tile over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Naveen

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqmbut not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Non skid ceramic tile : HR Johnson/Kajaria/Naveen

Material and labour for Plain cement concrete 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc including necessary form work complete all as specified and as directed

Material and labour for Reinforced cement concrete Type B1,1:2:4 using 20mm graded stone aggregate in Slab supported on walls, as in Shelves complete all as specified and as directed.

Material and labour for Steel formwork to soffits of rough finished flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping). complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a preparatory coat of 1mm thick wall care putty complete all as specified and as directed.

Material and labour for Preparation of old decorated plastered ceilling surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

Materia; and labour for Machine cut Cudappah stone slab, 20-25mm thick, as in flooring, platforms, shelves etc. laid and jointed with neat slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Machine cut granite slab in dado or skirting etc 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed

Material and labour for Rubbing and polishing and bull nosing the edges where required complete all as specified and as directed .

Material and labour for Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed..

Supply and fix Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement, etc.complete all as specified and as directed .Note :(i) Make of aluminium anodised shutter :Jindal/Hindalco/Indal. (ii) Thickness of anodisation shall be of 15 microns

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.Note : Make of glass : Saint gobain /Modi guard /Gold fish

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 30mm thick (stiles)consisting of frame made out of M.S.tubes for top & bottom rails.M.S. frame shall be covered wire heat strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,for fully gauzed,panel will be of wire gauze in lieu of single side prelam pvc sheet panel,the wire gauze shall be wrapped on an additional square 8mm M.S.tubes.the wire gauze shall be stretched to tighten firmly with beading, and joined together with solvent cement, and fixed in the frame at site all as per specification and drawing..complete all as specified and as directed

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening with wood grain printed PVC sheet and edges painted to match printed sheet, etc complete all as specified and as directed

Supply and fix in repairs MS butt hinge cold rolled medium weight 100mm size etc complete all as specified and as directed.

Supply and fix in repairs Anodised aluminium barrel tower bolts of extruded section , size 150mm long complete all as specified and directed.

Supply and fix in repairs Extruded aluminium alloy 'D' type handle ,fabricated type , 150mm in size complete all as specified and directed.

Supply and fix in repairs Aluminium alloy anodised sliding door bolts 300mm with hasp and staple (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. .

Supply and fix in repairs 1000 litres capacity Rotational moulded Polyethylene water storage tanks (cylindrical vertical with closed top) Double layered , hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed.Note :Make of water tank : Sintex/Polycon/Infra (ISI Marked)

Supply and fix in repairs 20 mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc, complete all as specified and as directed.Note :Make :Leader/Sant/Kirloskar

Supply and fix in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight ;210gms.) .complete all as specified and as directed.Note :Make :Prayag/M/S Shakthi Industries

Supply and laying 16 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed Note:Make of CPVC Pipe : Ashirwad/Astral

Supply and laying 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed Note:Make of CPVC Pipe : Ashirwad/Astral

Supply and fix 16 mm outer diameter CPVC Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note:Make of CPVCfittings :Ashirwad/Astral

Supply and fix r 16 mm outer diamete CPVC Brass Tee fittings on walls/ceiling or laying in floors complete all as specified and as directed .Note:Make of CPVCfittings :Ashirwad/Astral

Supply and fix 16 mm outer diameter CPVC Male Brass Threaded Adaptor (MTA/ MBTA) fittings on walls/ceiling or laying in floors complete all as specified and as directed . Note:Make of CPVCfittings :Ashirwad/Astral

Supply and fix 16 mm outer diameter CPVC Female Brass Threaded Adaptor (FTA/ FBTA) fittings on walls/ceiling or laying in floors complete all as specified and as directed Note:Make of CPVCfittings :Ashirwad/Astral

Supply and fix 16 mm outer diameter CPVC union fittings on walls/ceiling or laying in floors complete all as specified and as directed Note:Make of CPVCfittings :Ashirwad/Astral

Supply and fix 15 mm bore Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.Note :Make : Jaguar/Johnson/Cera

Supply and fix health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed .

Supply and fix in repairs Vitreous China Urinal, Half stall type, white incuding providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 ,securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement .complete all as specified and as directed.

Supply and fix in repairs Vitreous China Urinal, Full stall type, white incuding providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 ,securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement .complete all as specified and as directed..

Supply and fix in repairs Plastic water closet seat for EWC, closed pattern with flat bottom and cover, any colour as approved by GE and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. Note :Make :Parryware/Cera/Hindware .

Supply and fix in repairs 15 mm bore dia size 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix 15 mm bore Bib taps brass chromium plated fancy type with crutch or butterfly handle , screwed down ,screwed for iron pipe or for brass ferrule complete all as specified and as directed.Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix in repairs PVC connection 15 mm size with PTMT of 450 mm longcomplete all as specified and as directed. Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs 32 mm bore dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note:Make :Finolex/Supreme

Supply and fix in repairs 110 mm bore dia PVC (SWR) pipes , single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed..Make : Finolex/Supreme

Supply and fix in repairs75 mm bore dia PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed. .Make : Finolex/Supreme

Supply and fix PVC (SWR) reducer for 110 mm bore dia of pipe.complete all as specified and as directed. .Make : Finolex/Supreme

Supply and fix PVC (SWR) cowl 75 mm bore dia of pipecomplete all as specified and as directed. .Make : Finolex/Supreme

Supply and fix110 mm bore dia of PVC (SWR) WC connector with lip ringcomplete all as specified and as directed.Make :Finolex/Supreme

Supply and fix PVC (SWR) S trap 110mm bore complete all as specified and as directed.Make :Finolex/Supreme

Supply and fix 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed .Make : Finolex/Supreme .

Supply and fix PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed..Make : Finolex/Supreme

Supply and fix CP towel rail 20 mm dia , 60 cm long fixed with chromium plated brass screws and wooden/plastic cleat complete all as specified and as directed.

Supply and fix vitreous China white soap dish of size 160x 160x90mm any type fixed to plugs with chromium plated brass screws etc complete all as specified and as directed.

Material and labour for 10 litres capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and as directed.Make : Parryware(Slim line)/Cera/Johnson

Material and labour for Vitreous China wash down water closet pan (pedestal pattern), white coloured with fixing bolts and flushing pipe , seat and cover with hinges device complete all as specified and as directed. Make: JAQUAR or equivalent model in Johnson/Hindware

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed . Make: JAQUAR or equivalent model in Johnson/Hindware

Supply and fix in repairs Vitreous China wash basin, white, flat back, size 630 mm x 450 mm including CI brackets, (flat back or angle back type) any size, including cutting for and pinning in ends of pedastel stand ,fixing of supply and waste pipe stand, waste coupling, 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors, including 15 mm bore long neck fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including 15 mm bore fancy type stop valves, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and 600mm long PVC connection pipe etc, complete all as specified and as directed. Note :(i) Make of LDPE Pipe : finolex/Supreme (ii) Make of pillar tap /stop valve : Jaguar/Johnson/Cera (iii) Make of PVC connection ; Kohinoor

Material and labour for Point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables for phase and neutral drawn through and including PVC casing capping of suitable size with all necessary fittings and provision of one run of green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including 2nd HW board with sunmica top cover for mounting switches/sockets etc, type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No.96 here in before but for One fanpoint controlled by one switch and regulator

All as described in item No. 96 here in before but for one 3 pin 05 Amps socket outlet on independent board.

All as described in item No. 96 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 96 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Material and labour for Submain wiring complete with FRLS PVC insulated unsheathed multistranded cable , 1100volt grade , 02 run of 04 sqmm copper conductor cable confirming to IS 694 drawn through and including non metallic rigid PVC CONDUIT of 20 mm dia in Ivory/Grey/white colour medium grade etc fixed on wall/ceiling including provision of FRLS PVC insulated unsheathed multistranded cable , 1100volt grade , 01 run of 04 sqmm copper conductor cable confirming to IS 694 and Connected to earth dolly complete all as specified and as directed. Note :-(i) 03 run of 04 sqmm PVC Cable including 01 run of PVC CONDUIT will be measured as one length . (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix switch piano type 5 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix switch piano flush type 15 Amps 230volts, AC one way complete all as specified and as directed.Make -Anchor /Legrand/Cona

Supply and fix socket outlet 5 Amps 3 and 5 pin flush type multipurpose, 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fixsocket outlet 15 Amps 3 and 5 pin 5 and 15 Amps flush type multipurpose , 230 volts ,AC one way,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix PVC or Poly carbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply,,complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted PVC flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Havells cat part no : or equivalent price and specification of M/S Wipro/CG

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Make : Havells cat part no : or equivalent price and specification of M/S Wipro/CG

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed Make : Anchor/Rider/Legrand

Supply and fix Ceiling fan complete with 03 Nos of blades, down rods of 20 mm dia , electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) connected with 3 core FRLS PVC flexible copper cable 1.50 sqmm size Pre wired from ceiling rose to connector complete all as specified and as directed. Make : Havells/CG/Bajaj

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed. Make : Havells/Legrand/L&T

Supply and fix MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution boardcomplete all as specified and as directed.. . Make: Siemen /Schneider/Havells

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed. Make : Havells/Legrand/L&T

Supply and fix MCB 240V, 10KA 'C' curve , SPN 40 to 63 AMPS for poles and current carrying capacity in the MCB DB complete all as specified and as directed.. . Make: Siemen /Schneider/Havells

Supply and fix MCB 240V, 10KA 'C' curve of SP 6 to 32 AMP for poles and current carrying capacity in the MCB DB complete all as specified and as directed.. . Make: Siemen /Schneider/Havells

Material and labour for electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook and testing of Earth resistance complete all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4.0 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Havells /Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth and getting out in any type of Soil. for laying of cables/ GI tubes etc complete all as specified and as directed

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Supply and fix GI pipe light grade 40mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection complete all as specified and as directed. Note :Make of GI Pipe :TATA/Jindal/Zenith

M/s B C CHOUGULE

M/s. KIRAN M CHOUGULE

SHRI.H.R.PATIL

CHANDRAKANT V ATIWADKAR

M/S MAHADEV M PATIL

DHANSHRI ENTERPRISES

m/s Pravin s Bhosale