Composite Works (Civil and Electrical/Gen.)) in connection with 1. Construction of additional building besides combined crew lobby, BMY in Raipur Division. 2. Construction of additional 10 rooms at Running Room, BMY in Raipur Division. 3. Construction of new building consisting of crew lobby and 10 rooms Running Room at RSD. 4. Development of facilities for practical training on three phase locomotives for loco pilots at BMY.

A-Execution of all works connected with above work covered under

B-Execution of all works connected with above work covered under Above/

C-Execution of all works connected with above work covered under

D-Execution of all works connected with above work covered under

Hiring of JCB Machine (in good working condition) for leveling and dressing ground / 1 dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site.

Selection of suitable site for drilling bore well/tube well by electrical resistivity method for all diameters

Drilling of bore well for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour up to 75 meters For 200 mm dia

Drilling of bore well for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour up to 75 meters Extra over 75m drilling for 200mm dia

Providing supplying, lowering and fixing in bore unperforated MS casing pipe 6 mm thickness up to specified depth below ground level with all contractor's tools, plants, material and labour etc. complete 200 mm internal pipe

Conducting in situ full size Plate load test (PLT) at selected location as per IS: 1888 including making loading arrangements & casting of RCC/cast in situ concrete footing as per codal provisions including excavation and refilling of trial pit b. Plate size 45 cm x 45 cm (%) Unit Above/

E-Execution of NS items connected with above work.

Providing and fixing medium grade G.I. pipes complete with G.I. fitting, trenching and refilling etc. for external work : 150mm dia nominal bore.

Providing and fixing PVC pipe 150 mm dia.

Providing & fixing permanently colour coated trapezoidal profiled sheet of depth 28-35 mm deep and 200- 300mm pitch distance with precisely engineered "rib & Flute" design with 950-1050 mm effective cover width matching to pofile of PUF panels. Profiled sheets shall be minimum 0.50 mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated gallvalume /zincalume steel sheet (550 MPa yield strength) having a coating of mass of 150 GSM Zn-Al alloy coating as per As 1397-1993 finished 3 with 20 micron approved colour coating of Super Durable Polyster XRW coating or equivalent paint, coat on exposed surface over a primer coat of 5 micron and back coat of 5 micron on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins/girts with hexagonal nead self drilling suitable fasteners with EPDM washer on crests of the sheet @ 300mm c/c on all sides and end laps etc. Measurement shall be based on per unit of finished laid surface area. Sealant and gaskets wherever necessary to be provided to ensure contemporary asthetic look of international standard.

Supplying and fixing Health Faucet 1mtr. flexible Tube complete set Jaquar or similar make with contractors materials and labours and as per direction of Engineer in charge.

Supply, erecting and fixing of retro reflective board made with HIP grade retro 5 reflective sheet of Avery Dennison or 3M make, board with 2mm thick aluminum sheet, back supported with 37x37x3mm angle frame and diagonally with same angle along with arrangement for fixing at site including nuts & bolts (minimum 10mm dia) complete.

Supplying and fixing of Metro flush Jaquar make FLV-CHR-1095with Contractor's material, labour & asper direction of Engineer-in-Charge. Square

Providing and fixing12mm thick clear Foot glass (Saintgobain, Modiguard or equivalent make) cutting, tuffing, transporting, fixing with SS-304 fitting (Nexia, Dorma or equivalent) including hinges for door. Floor spring for door locking, sealing the edges with silicon gel etc. complete with contractors, labour, tools, plants all taxes as applicable complete.

Supplying and fixing EWC wall hung with CI bidet bolt with brass cap Jaguar make with contractors materials and labours and as per direction of Engineer in charge.

Supplying and fixing under counter wash basin 190x550x430mm Jaguar make with contractors materials and labours and as per direction of Engineer in charge.

Supplying and fixing pillar cock with Brass cap Jaguar make with contractors materials and labours and as per direction of Engineer in Charge.

Supplying and fixing of bottle trap 1¼ complete set Jaguar make with contractor materials and labours and as per direction of Engineer in charge. (%) Unit Above/

F-Design & Drawing

Making and Providing detailed design and drawing as per site conditions and specifications including revision of design/ drawing as required for construction of G+2 building and one floor for future expansion, conforming to Railways General arrangement drawing. Note:- 1) The 1 design is to be got proof checked by IIT/NITs. Submissions of proof checked drawings on reproducible tracing film as well as in soft copy along with Ferro prints & design calculations of each component complete. 2) Design calculations and drawings are to be submitted in soft as well as hard copies (3 Sets). 3) The contractor should arrange for site visit of Designer, if required, for collecting the necessary site details for the design.4) Design should confirm to BIS codes with all latest correction slips. 5) Only Auto CAD drawing and on reproducible tracing film are to be accepted. 6) The payment for the same will be released after approval of drawings & design by the Railways. 7) Overall provision available in schedule may be kept in view during design. No additional payment will be made for any correction in design & drawing. (%) Unit

G-Execution of all items/works ( CPWD DSR 2021-Ver-2) not covered Above/

H-Electrical Supply

Supply of 4 core 70 sqmm LTUG XLPE armoured cable.

Supply of 4 core 16 sqmm LTUG XLPE armoured cable

Supply of 4 core 10 sqmm LTUG XLPE armoured cable

supply of 35 litre electric water heater/geyser.

Supply of 4 feet, 20 watt(approx) coolwhite LED tube light fitting.

Supply of 6W decorative LED alluminium bollard garden light

Supply of BLDC ceiling fan 1200 mm Sweep complete

"Rate for supply of 300 mm sweep exhaust fan with all accessories."

Supply of Exhaust fan 150 mm including allaccessories (fresh air fan).

Supply & fixing of 6 watt LED reading lamp.

Supply of 1.5 Tonne Split AC, Inverter type, 5 star with accessories & transportation as per details.

Rate for supply of semicircular RCC Pipe.

supply of 40 mm dia class A GI pipe.

Supply of wall mounted metallic sub-distribution board with 2x100A MCCB 4P, 6x63A TPN MCB, 6x32A DP MCB, bus-bar and neutral link arrangement etc.

Supply, installation & commissioning of 125 KVA DG set with AMF panel.

Supply and erection of 400A Automatic 4 P Changeover.

"Supply, installation and commissioning of 1000 LPD solar water heater"

Rate for supply of 2 HP, 1-phase, submersible pump set of 80 meter discharge head, control panel including starter.

Supply of submersible 3 core 2.5 sqmm copper cable.

Supply of submersible Single phase 2 HP starter control panel with various protections, ON/OFF & trip indication with enclosure.

Supply of 100-120 watt LED flood/street light fitting.

Rate for supply of wall mounted 4-way metallic Sub distribution board with 02 nos 16 A DP MCB, 02 nos 32 A DP MCB busbar, neutral and earthing arrangement etc.

supply of 16 amps SPN MCB with enclosure.

Supply of 32 amps TPN MCB with enclosure. Square

Supply of Glow Sign as per required size, Glow Sign Boards (inner cut) as per details described under this item.

Supply of ceiling rose as per details.

Supply of 5 meter single arm SST pole.

Supply of Junction Box of 200 x 150 x 80 mm with 2 Nos. 16 A kit kat fuse with a suitable size Hylam sheet.

Rate for supply of 4-7.5mtr Single/Double arm octagonal pole.

Supply and fixing of 45-watt outdoor LED light fitting to work on 230 VAC supply as per details.

Supply of 36 watt, 2 x 2 cool white LED-based recess mounting fitting

Supply of 25 W LED post top gate light fitting dome type with driver and with all accessories as per details.

"Supply installation & fixing of 380/400 Liters storage water cooler, cooling capacity- 170 liters./hours approx Refrigirent R22 material SS current Amp. along with 04 tabs"

Supply, installation and commissioning of on grid rooftop solar panel of capacity 10KWp.

Rate for supply of 10HP submersible dewatering pump, 3-phase 415 V discharge 1800 lpm,10mtr head, with motor and all accessories as per details.

Rate for supply of starter for 10 HP Submersable control panel including automation 36 equipment including like suitable type starter ,timer ,single phase preventer cum dry sensor with probe element ,Over& Under voltage protection ,reverse current protection,ampere meter,voltmeter, indictor,rotary switch and indicator arrangement etc asper details.

Supply of 3-core, 6sqmm copper flat submersible cable as per details.

Supply & erection of 3W Wall Step Conceal Light Outdoor and Indoor LED Foot Light with Aluminium IP65 Grade Waterproof Body.

Supply and erection of Occupancy sensor for light and AC.

15W LED surface-mounted flush-type fitting for false ceiling.

Rate for supply of 40 Watt LED flood/street light with fittings.

"Supply of 60 watt(appx.) LED based flood/street light fitting"

supply of wall mounted 4-way metallic sub-distribution board with 01no 63A TPNMCB,3nos 32A SPMCB 06nos 16A SPMCB busbar and neutral link arrangement etc.

"Rate for supply of floor mounted LT Control Pannel consist with 2x400A 4P MCCB 50kA 44 breaking capacity for incoming,4nos. 4P 200A 4PMCCB 50KA breaking capacity, 4nos. 4P 100A 4PMCCB 35KA breaking capacity, 06nos.32A TPN MCB for outgoing complete with three phase busbar distribution system and backup HRC fuse, & Metering arrangement and indication etc. as per details"

Rate for supply of circular RCC Pipe 150mm inside dia, 30mm thickness

Supply of LED Striplight, warm white, 15 W (Tolerance: 1W) IP65Waterproof 50 M rollwith adapter Supply ofLED Strip light, warmwhite, 15 W (Tolerance:1W) IP65 Waterproof 50M roll with adapter as per details described under. (%) Unit Above/

I-Electrcal Execution

Excavation of cable trench, laying of semicircular RCC Pipe, and refilling of excavated earth.

Rate for laying of cable along with Track/Road/Drain through semicircular rcc pipe including all material.

Rate for laying of cable in open air with proper fixing arrangement in the supporting structure.

Installation of 35-litre electric water heater/geyser.

Rate for fixing of 4 feet, 20 watt(approx ) coolwhite LED tube light fitting.

Fixing of Bollard type garden light in the circulating area as per details.

Rate for fixing of BLDC ceiling fan 1200 mm sweep complete.

Rate for fixing of Exhaust fan with all accessories.

Installation & commissioning of split type Air Conditioners OR dismantling of Air conditioner as per details with Fixing of Heavy Duty AC Stand/ Heavy Duty Air Conditioner Outdoor Unit Mounting Bracket as per details.

Rate for concealed wiring for AC point with 4 sqmm insulated copper conductor, including supply of Ray-roll socket with 30A SPMCB and all materials.

Concealed/casing/conduit/capping wiring for 6 Amp light, fan & 6 Amp socket with modular board with switch by 1.5 sq mm copper wire and with concealed PVC.

Concealed/casing/conduit/capping wiring for 6 Amp plug point with modular board with PVC insulated copper conductor 2.5 sq mm size with supply of all materials.

Rate for concealed wiring for Sub-Service connection from main DB to Sub DB with 6 sqmm insulated copper conductor, including with supply of all materials.

Installation of wall-mounted metallic sub-distribution board with 2x100A MCCB 4P, 6x63A TPN MCB, 6x32A DP MCB, bus-bar and neutral link arrangement etc

Rate for installation of 2 HP, 1-phase, submersible pump set of 80 meter discharge head, control panel including starter.

Installation, testing, and commissioning of a submersible single-phase DOL starter as per details.

Fixing of wall-mounted 4-way metallic sub distribution board with 02 nos 16A DP MCB, 02 nos 32A DP MCB busbar, neutral and earthing arrangement, etc. "

Erection of SPN/TPN MCB with enclosure

Cutting of trench across/on the platform for a depth of 10cm and a width of 10cm with a marble cutting machine and filling the trench mtr after cable laying and restoring the surface with plaster to give the original status. Square

Fixing of Glow Sign as per required size, GlowSign Boards (inner cut) as per details described under this item.

Dismantling of old electrical panel, old electrical wiring, old equipment like old AC, existing overhead span & electric poles and transportation of all released materials.Dismantled electrical equipment/materials to SSE/Electrical/PL store.

Fixing of Junction Box of 200 x 150x 80 mm with all accessories.

Excavation, construction of concrete muffing, and painting of 5 mtr single arm SST Pole.

Rate for erection of 4-7.5 meter single/double arm octagonal pole by Earth excavation and foundation for pole.

Fixing of 36 watts 2x2 LED base recess mounting fittings.

Fixing of 25 W LED post top gate light fittings with all accessories as per details.

Rate for installation of 10 HP submersible pump with all accessories.

"Rate for installation of Starter control panelfor 10 HP Submersable including 28 automation equipment including like suitable type starter, timer, single phase preventor cum dry sensor with probe element ,Over& Under voltage protection ,reverse current, protection, ampere meter, voltmeter, indicator, rotary switch, and indicator arrangement, etc as per details"

Fixing of flush-type fitting for false ceiling.

Fixing of LED flood/street light fitting.

FIXING of wall-mounted 4-way metallic subdistribution board with 01 no 63 A TPNMCB, 3 nos 32 A SPMCB, 06 nos 16A SPMCB busbar and neutral link arrangement, etc.

excavation of cable trench, laying of circular RCC Pipe, and refilling of excavated earth

Rate for laying of PVC armoured Cable across the Track/Road/Drain using by circular RCC Pipe

Fixing of flexible LED strip light Fixing & wiring flexible LED strip lights as per details.

Supply, erection, and testing of earth cone and connection to the distribution panel board.