Design Supply Installation Testing commissioning of High Visibility Hospital Identification Indicator with Super Structure Support at HBT Trauma Care Municipal Hospital Jogeshwari E Mumbai

Amount

Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.)

Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.

Providing and fixing the Chemical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning with blow pump and anchoring the bolt with chemical as per manufacturers specifications etc. complete as directed by Engineer In Charge. M10 x 90 foil capsule (HVU) & M10 x 130 Rod

Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 50 mm. 'C' class

Nominal Mix of 1:1.5:3 (1 cement OPC: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Design,Fabrication & Installation of 4 mm thick exterior grade PVDF coated aluminium composite panels of ALUCOBOND having 0.5 mm thick aluminium PVDF coated sheet available in standard colours + 3 mm core material + 0.5 mm aluminium sheet chemically treated ( back sheet ) bent as per requirement, fitted on anodised aluminium necessary coated rectangular grid work, hardware, fixtures,brackets, anchor, fasteners of S.S. 304 grade etc. complete duly sealed with weathering silicon manufactured by DOW corning / G.E. silicon for circular columns and curved beams etc complete. All section for supporting ACP shall be of size 50 x 50 x 2.5 mm at a distance of 1.2 m Horizontally & Vertically or as per requirement of the design shop drawing has to be submitted by the contractor for the approval of structural Engineer

Providing & Fixing signage made of 15 mm thick solid white acrylic laser cut out letters for height up to 25" etc complete.

Providing & Fixing signage made of 15 mm thick solid white acrylic laser cut out letters for height up to 39" etc complete.

LED flexible strip light 2 wire min of 4.8W

Cranes 3 tonnes capacity

Shree Ganesh Enterprises