Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹78,000
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
PROVN OF LIVING ACCN WITH ALLIED INFRA UNDER STN HQ ZANGLI
2023_MES_600992_1
GE 874/EWS-27/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹78,000
Yes
6 Jul 2023
3 Jun 2023
3 Jul 2023
3 Jun 2023
1 Jul 2023
17 Jun 2023
3 Jun 2023 - 10 Jun 2023
Amount
BR and EM Portion
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep in any type of soil and getting out soft/loose soil.
Add to item No 01 for additional 1.50 m or part therof in depth beyond the first 1.50m
M & for PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete
M & L for RCC M-30 design mix (20 mm Graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified
M & L for RCC M-30 design mix (20 mm Graded aggregate) in Columns, pillars, piers, posts and struts concrete complete all as specified
M & L for RCC M-30 design mix (20 mm Graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified
M & L for RCC M-30 design mix (20 mm Graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified
M & L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
M & L for TMT mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
M & L for 15 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified and directed.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, on external wall finished even and fair mixer with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacture and in the propartion indicated all as specified and directed.
Supply only integral water proofing compound all as specified and directed
M & L for preparation of newly plastered or unplastered surfaces and applying two coats of cement base paint complete all as specified and directed
M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed
S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed
S & F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed
M & L 2nd class soft wood "Khatambandh" (Kashmiri Art) in ceiling/wall over 12mm thick BWR plywood and scantiling framework including cornices and beading as required and applying three coat of polish after preparation of the surface, complete all as specified and directed.
2nd class soft wood wall/ceiling paneling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall paneling 15 mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. Note : - Frame work shall be measured & paid separately.
M & L pergo tiles wooden mat finish of size (1200x200x7-8mm) laid over & including PVC foam 5 mm thick with SR adhesive over & including 50 micron polythene sheet complete all as directed by Engr-in-Charge.
M&L Second class clean sawn soft-wood in scantlings all as specified and directed.
Providing and fixing factory made uPVC white colour Sliding window Three track area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if equired) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Aluminium panelled door single leaf with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of section size 62.5mm x 37mm x 1.5mm thick, shutter with middle and bottom rail of aluminium section 112.5mm x 37mm x 1.5mm thick and stiles and top rails of aluminium section 83mm x 37mm x 1.5mm thick with suitable locking arrangement with lock (Make: Godrej / Link) 7 levers and self closing devices with rebates including joining cleats of suitable section for fixing and including provision of builders hardware fittings as required, door spring (Make: Sandhoo / Amar) and glazing with 5.5mm thick ordinary plain coloured glass (Make: Modi / Atul), including provision of EPDM rubber / neoprene gasket as required, including provision of necessary fittings, fixtures etc., complete all as specified and directed.
S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete.
S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area exc 0.5 Sqm in each pane complete.
S & F 4.8 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square area exc.n 0.5 Sqm in each pane complete.
M L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed
M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base for floor finieshes all as specified abd directed by Eng-in-Charge
M&L for cement concrete 40 mm thick, type B-1, 1:2:4 (20mm graded aggregate) as in floor finieshes and even and smooth without using extra cement complete all as specified abd directed
M & L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed
M&L for light colour virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per item above but on vertical surface such as skirting, dados, risers to steps, etc., set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:6 all as specified and directed by Eng-in-Charge.
M&L for cement concrete 75 mm thick, type C-2, 1:3:6 (20mm graded aggregate) as in plint protection/path finished even and smooth without using extra cement complete all as specified abd directed
M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.
S & F drappery rods stainless 25 mm dia, with end brackets, decorative type, cut to length as required size, colour coating including matching socketed brackets, complete all as specified and directed.
Vitreous china counter top wash and basin, oval type, of size 560mm x 410mm with chromium plated waste coupling long shank type, complete all as specified and directed.
Vitreous china one peice European type water closet of size 700mm x 370mm x 760mm and making necessary connection to drain or out going pipe fixed on floor, complete all as specified and directed.
Central hole basin/sink mixer, 15mm bore, with popup waste, chromium plated, screwed down for galvanised iron pipes, complete all as specified and directed.
Wall mixture, 15mm bore, with telephonic shower arrangement chromium plated, screwed down for galvanised iron pipes, fixed in repairs, complete all as specified and directed.
Chromium plated brass shower rose 125 mm long, fancy type with swivel joints fixed to 15mm bore pipe, complete all as specified and directed.
S & F stop cock/ angle valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15 mm bore, complete.
S& F in repair chromium plated towel ring including brass screw complete all as specified and directed.
S& F chromium plated towel rack with lower hanger ,brass raling , including brass screw complete all as specified and directed.
S&F brass chromium plated toilet paper holde complete all as specified and directed
S & F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc. complete all as specified and directed.
S & F sink with drainage board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in CM to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmxx160mm.
M&L for galvanised steel tubes medium grade 15 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.
M&L for galvanised steel tubes medium grade 20 mm dia fixed to wall or ceiling or laid under floor, complete with necessary fittings all as specified and directed.
Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed
Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed.
S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Eng-in-Charge.
S&F 110mm bore, PVC (SWR) pipes, single socket in any length, with rubber ring joints fixed on walls.
S&F 75 mm bore, PVC (SWR) pipes, single socket in any length, with rubber ring joints fixed on walls.
S & F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed by Eng-in-Charge
S & F PVC (SWR) bends any radius, 75 mm bore complete.
S & F PVC (SWR) bends with access door any radius, 75 mm bore complete.
S & F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement and fixed compete all as specified and directed
Fabrication & fitting in repair of modular kitchen with cabinet/ shelves & wardrobe/ cupboard made out of 18 mm thick PVC board plain colour & laminated sheet with piano hinges (sheet shall be laminated over PVC board with solvent adhesiv at external faces) including providing cabinet for keeping baskets/ cutlery basket with handles/ door shutters all as specified and directed NOTE : PVC sheet fittings & fixture will be measured and paid seperately as supply only.
Supply only 18 mm thick solid PVC board one side prelam sheet colour (Saluca sheet) of Make : Rajshree or equivalent all as specified and approved by Accepting Officer laminated with suitable cement solvent adhesive for shutter/ kitchen cabinet/ cup-boards/ partition wall/ wall cabinet and similar complete.
Supply only 100 mm size Double action spring brass, with phosphor bronze wire spring, bright polished hinges complete all as specified and directed.
Supply only 150 mm dia brass handles, cast type, polished bright finish complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed
On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users with upflow filter including media.
Construction of soakage well (brick masonry) of 1.2m internal dia and 3.00m deep below inlet level including necessary earth work filling with brick bats of guage 40 to 60mm, SWG inlet pipe junction 150mm bore including all other relevent works, complete all as specified and shown on drawing CESZ/TD-2015.
M&L for RCC NP3 150 mm diameter Pipes laid on150 mm thick bed in 1:4:8 with excavation in any type of soil, including manholes /drop manhole of standard size made of Brick masonry / RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified
M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in fdn.
Walling of random rubble masonry uncoursed, well bonded , bedded and solidly hearted built in CM 1:4
Cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in coping including form work.
Extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n. exc 40mm dpression granite or trap stone.
M&L rendering 20 mm thick in cm 1:4 on on stone masonry surfaces complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement cocrete using extra cement including forms moulds, mitred /stopped ends etc
M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit ISI maked heavy duty for one light fan/bell point controlled by one switch including modular cover plate of suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per item above but for MODULAR call Bell point complete all as specified and directed.
All as per item above but for MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per item above but for MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.
All as per item above but for MODULAR 15/16 Amps socket outlet on inependent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.
S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.
S & F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.
S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S & F of Modular Fan step regulator 120W-2 module , complete all as specified and directed.
S&F Modular bell push 6 A, 1 Module, Complete all as specified and directed
S & F Bell AC, 230 Volts, Single pole complete all as specified and directed by E-in-C.
S&F in replacement mirror light 10 Watt LED 2' length prewired with all accessories including lamp and connected electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor 3core cable of size 0.50Sqmm.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ1I060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative bed side lamp, brushed nickel finish fixture with acrylic diffuser suitable with complete with drivers, holders, 7.5 W LED filament lamp LHFOAJE1TN1I060 9405 1291.00 including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative, surface mounted conical shape fixture 7.5 W A60 LED Filament Lamp Black LHFXAGP1TN1K007 9405 drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and Install of the electric water heater storage 25 Ltr capacity 5 Star rated of Stainless Steel body vertical type glass lined of inner tank and heating element and having the wall mounting arrangement,thermostate,indicators and thermally insulated stainless steel tank of glass lined inside the tank and heating element, PTMT connection pipe of 15mm dia and mounting on wall with suitable size of anchor bolts with complete connection of water & testing and all as specified and directed. Make- Havells Puro Turbo DX/ Racold / Bajaj Calenta
S&F LED smart Lamp, B22 type, 14 watt, complete all as specified and directed.
S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete Make of LED Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent to Philips/ GE.
S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified. Make :- CROMPTON CAT Part No. LBHP-10-CDL
M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
Supply and fixing, testing and connecting the star rated ceiling fan 230 volts,single phase of 1200mm sweep double bearing type with including down rod,canopy cover etc and connecting with 3core flexible copper conductor of 0.50 sq mm and including writing of MES No with black enamelled paint as per directed by engr-in-Charge.Make-Orient/Bajaj/CG
S&F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 32 Amp all as specified and directed.
S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 6-32 Amp all as specified and directed.
M&L sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps complete all as spd and directed. Make:- Hager/ Legrand/ ABB
M&L for sub Main Wiring with 2 run of single core, 6 Sqmm FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.
S&F distridution board iron clad vertical DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way complete with appropriate size of copper bus bar and neutral link complete with one MCB TPN 4 Pole 415V 100 Amps rating,16kA with adjustible thermal and adjustible magnetic release of the same make as of distribution board complete all as specified and directed. Note: (MCBs will be measured and paid saperately)
S&F building secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. Make: CROMPTON CAT REF. LSTS-30-CDL or technocommercially equivalent to Philips/ Wipro.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. Note :- The rate quoted include cost of min 7.5 metre earthing wire.
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified
M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.
Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core.
Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 20 mm dia pipeline complete all as specified and directed.
S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20 mm complete all as specified and directed by Engr-in-Charge.
Cutting of Existing GI Pipe of Size 25/40/50 mm dia and and threading of existing pipe with die set comple and fitting of GI Tee for suitable size for fixing of GI pipe 20 mm bore complete all as specified and directed
M/S ASMATULLAH SHAH
M/S MOHAMMAD JAMAL WANI
M/S LONE CONSTRUCTION COMPANY
Bidder Name
M/S MOHAMMAD JAMAL WANI
M/S SAJAA CONSTRUCTION COMAPNY
M/S ASMATULLAH SHAH
M/S LONE CONSTRUCTION COMPANY
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .