IMPROVEMENT OF MEC COMPLEX SPL REPAIR FOR CCD SCHEME PAINTING OF SUN SHELTER AND VARIOUS BUILDING AT AF STN GORAKHPUR

Amount

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate finished surface even and smooth without using extra cement mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for 10 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:4 finished surface even and smooth without using extra cement mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:6 finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for RCC 1:1½: 3 type A-1 using 20mm graded mechanically crushed stone aggregate as in chajja, beams, cantilevers, lintels over 1.5m span etc complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, Chhajja, and similar work n. exc. 200 mm thick, rough finished surface of complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame exc 1.50 Sqm and n.exc 4 sqm each and removing from site complete all as specified and directed.

Taking down steel rolling shutter of any description complete all as specified and directed.

S&F steel rolling shutters as per IS-6248-1979, made of required size MS latch interlocked together through their entire length and jointed together at the ends by end locks mounted on shafts (50mm dia) heavy duty, thickness of lathe 1.20mm, grade II springs, guide channel 3.15mm thick, bottom plate 3.15mm thick gear operated shutter with bevel gear box and crank handle, hood cover 1.20mm and applying one coat of red oxide primer complete all as specified and directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed.

S&F non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm and n.exc. 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface of size 300x200x7/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over screed bed 10 mm thick in CM 1:4 complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltr capacity triple layered ISI marked white colour (cylindrical vertical with closed top) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos bracket, complete all as specified and directed.

S&F in repair vitreous china water closet squatting pan, 'Orrisa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

All as per item No. 22 above but 20mm bore.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as specified and directed.

All as per item No. 24 above but 20mm bore.

S&F in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs angle valves, 15 mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair vitreous china bowl type (flat back) urinal 465x 355x265mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F urinal spreader of PTMT of any colour for fixing with 15mmdia pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, of length 450mm complete all as specified and directed.

S&F 32 mm dia waste coupling complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level flushing cistern with ball valve and handle / push button, 32mm dia PVC flush pipe complete all as specified and directed.

S&F 32 mm bore PVC waste pipe complete all as specified and directed.

M&L for preparation new plastered surface of wall and applying two coat of oil bound distemper and a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and old painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall, pilasters, cornices etc and applying two coat of exterior emulsion paint in camouflage pattern (two or more colour combination) over one coat of alkali resistant primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coat of exterior emulsion paint in camouflage pattern (two or more colour combination) over one coat of alkali resistant primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.

M&L for preparation old decorated surfaces of any description, including cornices and applying one coat of white wash on ceiling complete all as specified and as directed.

S&F in repairs110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trench complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 5mm thick sheet glass, figured glass, pin headed and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying three coats of white wash as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copings, bed plate, roof kerbs or mud stops including weathering, slightly rounded or chamfered angles and throating with necessary form work complete all as specified and directed.

M&L for preparation new plastered surface of wall and applying two coat of plastic emulsion paint over a coat of primer complete all as specified and directed.

S&F Pressed steel frames of profile 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for 35 mm thick IInd class hard wood plain framed, paneled shutter (two panel or more) with lock rails and panel of 9 mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I) 2001 complete all as specified and directed.

S&F in repair steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt, complete all as specified and directed.

M&L in repair for machine cut Pre Polished Kota stone slab 18 to 20mm thick (minimum size 30cmx45cm) as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.

M&L for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. Including demolition of existing Brick work complete

M&L in repair for powder coated anodised aluminium partition with frame size 101.6 x 44.45 x 2mm thick and Intermediate frame size 101.50 x 44.45 x 2.4mm including necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with paneling in two parts with 5mm thick aluminium composite panel sheet in lower panel and 5.5mm thick toughened glass in upper panels incl all fittings & fixture complete all as specified and directed.

M&L for complete removal of existing treatment of old painted surfaces of CGI roof sheeting and applying two coats of synthetic enamel paint in camouflage pattern (two or more colour combination) over a coat of red oxide prime complete all as specified and directed. Note:-Work will be executed upto a height of exceeding 18 mtr from ground level.

M&L for preparation of old painted surface of steel or iron of any description area exc 10cm width or girth and applying two coats of synthetic enamel paint all as directed. Note:-Work will be executed upto a height of exceeding 18 mtr from ground level.

Taking down carefully copper/aluminium point wiring light/ fan/ bell/ socket or power complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc are to be measured separately) and/or drawing out from existing conduit/ batten and making good disturbed surfaces of walls/ floors/ ceilings complete all as specified and directed.

M&L for one light/fan point controlled by one switch point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken including provision for modular box including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete all as specified and directed.

All as per item No. 58 above but for one socket outlet 3/5 pin 5/6 amps independent controlled by one switch.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken for modular box including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 58 to 60:- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Sunken box, cover plate with frame, Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F modular switch single pole 1 way, 2 module, 16 Amp complete all as specified and directed.

S&F modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular white cover plate with frame 3 module complete all as specified and directed.

S&F modular white cover plate with frame 4 module complete all as specified and directed.

S&F modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular metal flush box made of 1.6mm thick GI 3 module complete all as specified and directed.

S&F modular metal flush box made of 1.6mm thick GI 4 module complete all as specified and directed.

S&F modular metal flush box made of 1.6mm thick GI 6 module complete all as specified and directed.

S&F ceiling rose surface bakelite, 65X50 mm three terminals complete all as specified and directed.

S&F in replacement factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F in replacement factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings complete all as specified and directed.

S&F in replacement MCB, SP, 10 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement MCB, SPN, 32 to 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement MCB ‘C’ series, TPN 32 Amps, AC, 240 Volts, 50 HZ complete all as specified and directed.

S&F in replacement MCB, 4 pole, 63 Amps current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F in replacement MCCB,4 pole, 100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed electrical wiring, cutting n.exc. 10cm girth and making good the disturbed surfaces to match the existing complete all as specified and directed.

S&F PVC conduit of size 25mm run in wall/ surface for existing telephone cable/Lan cable complete all as specified and directed.

S&F Air Circulator fan complete metal body and copper winding fan motor, 230 volts, 50Hz, single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed. Make:- Bajaj Model Supreme plus or equivalent model of specified make

S&F in replacement LED highway light fitting (WB) with high power 150 watt LED light complete all as specified and directed. Make:-Havells Model No. SAUCERGENXPROHBP150WLED757 PNBBOORL or equivalent in specified make

S&F in replacement testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No.ENDCITYLITPLAT+SL35W LED757 SASYBOP CWOSPD or equivalent of approved make

M&L for concealed Point wiring with FRLS insulated unsheathed multistranded copper conductor single core cable, 1100V grade (ISI mark) of size 1.5 Sqmm drawn through and including stove enameled steel conduit not less than 20 mm dia ISI marked concealed on wall for flame proof light / fan point controlled by one single pole one way 10 Amp flame proof ON-OFF rotary switch including provision of 1.5 sqmm FRLS insulated unsheathed multistranded copper conductor single core cable as earth wire to common earth & connecting to earth dolly with LM6 sunk Junction box for complete all as specified and directed. Note: Rate are inclusive cutting chases of brick and making good disturbed surfaces. Note:-(i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, shall be measured and paid separately.

S&F switch flameproof rotary type with termination box in LM6, 16A, single pole 250 V complete all as specified and directed.

S&F LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F flame proof exhaust fan single phase 230/240 volt AC 450mm sweep, with painted louvers, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc if required for fixing fan and making good to match the existing surface and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and directed.

M&L in replacement earthing with Galvanised iron earth plate electrode 600x600mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top of earth plate not less than 1.5 mtr below GL connected to GI earth strip of size 32x6mm connected to earth plate electro by means of GI nuts, bolts, and washers earth strip protection with and incl 40mm dia medium grade ISI marked GI pipe as shown in electrical plate No 5 of MES Sch Part-I, with and incl PCC 1:3:6 type C-1 pit with cover of RCC 1:2:4 type B-1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20mm dia GI medium graded pipe ISI mark, GI funnel with GI mesh, filling with mixture of common salt and charcoal, necessary excavation and earth work in soft/loose soil, incl test point, testing and commissioning complete all as specified and directed. Note: GI earth strip with GI pipe protection upto 7.5 mtr shall be deemed included in the item.

S&F in replacement earth continuity conductor or main earthing lead 32mmx6mm GI strip/earth lead, laid in trench, fixed on walls or any other position including jointing by tinned GI nuts, bolts and washers in addition to brazing at every joint, complete all as specified and directed.

M/S ARORA CONSTRUCTION

M/S NITISH ASSOCIATES

Sheo Prasad

M/S EASTERN TECHNOCRAFTS

GANGA TRADERS

sri krishna construction

Matrubhoomi Construction

M/S SHRI RC YADAV

PANKAJ AND BROTHERS

M/s Deeksha Construction electrical & Refrigeration & works

M/s Rajmani Engineers