Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.9 CrAdmitted-Finance CB 1 RING ROAD NARAINA NEW DELHI 110028 | NEW DELHI | DELHI | 110028 | -26.57% | ₹1.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.9 CrAdmitted-Finance | -24.50% | ₹1.9 Cr | L2 | Admitted-Finance |
| 3 | L3₹1.9 CrAdmitted-Finance | -24.30% | ₹1.9 Cr | L3 | Admitted-Finance |
| 4 | L4₹2.0 CrAdmitted-Finance 00 GONDA VISHNUPURI COLONEY GONDA GONDA UTTAR PRADESH 271002 | GONDA | UTTAR PRADESH | 271002 | -21.35% | ₹2.0 Cr | L4 | Admitted-Finance |
| 5 | L5₹2.0 CrAdmitted-Finance | -21.30% | ₹2.0 Cr | L5 | Admitted-Finance |
Tender Value
₹2.5 Cr
EMD Value
₹5.1 L
Closing Date
20 Feb 2026, 2:00 pmClosed
Shri. S K Dubey, Sc F, CCE
CCE (RnD) Estates South Chandrayangutta Hyderabad - 05
SPECIAL REPAIRS TO TRANSIT FACILITY-III,II AND IV AT DRDO TOWN SHIP, CV RAMAN NAGAR, BANGALORE
2026_DRDO_896396_1
CCEESTS/ENQ/SR/TF-III, II and IV/BLR/224/2025-26
Open Tender
Miscellaneous Works
365 days
CV Raman Nagar, Bangalore
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹5.1 L
10 Mar 2026
31 Jan 2026
23 Feb 2026
31 Jan 2026
20 Feb 2026
31 Jan 2026
CIVIL WORKS (TF III )
Demolishing cement concrete manually/ by mechanical means including disposal of material Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
Fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
For the purpose of measurement the entire treated surface will be measured.
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Dismantling tile work in floors and dados laid in cement mortar including stacking materials within 50 meters lead : for thickness of tiles 10mm to 25 mm
Providing and laying double charged polished finish Vitrified tiles of size 600x1200x 10 mm thick in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as perish : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).
Providing and fixing 1st quality ceramic glazed wall tiles of size 300x450x7mm thick conforming to IS 15622 (thickness to be specified by the manufacturer), of approved make in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kgs per sqm , including pointing in white cement with mixed pigment of matching shade complete
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
18 mm thick cement plastering on external surfaces of brick or concrete surfaces in two layers of 6 mm thick cement mortar 1:3 ( 1 cement 3 fine sand ) top coat mixed with integral water proofing compound over a base coat 12 mm thick cement mortar 1:5 (1 cement : 5 coarse sand), finished sand face etc; complete at all levels and locations.
15 mm thick plastering in cement mortar 1:6 (1 cement: 6 fine sand) on internal surfaces of walls finished smooth and even etc., complete at all levels and locations
Complete removal of dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Two coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, over a coat of water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. including applying additional coats wherever required to achieve even shade and colour.
Providing and applying cement based putty of average thickness 1mm, of approved brand and manufacturer, over plastered surface to prepare the surface even and smooth complete
Removing water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Finishing walls with Acrylic smooth exterior emulsion paint of required shade : (two or more coat applied @ 1.67 kgs/10 sqm over and includig priming coat of exterior primer applied @ 2.20 kg/10 Sqm
Dismantling doors,windows and clerestory windows (steel or wood) shuter including chowkhats, architrave, holdfast etc, complete and stacking within 50 meters lead
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing and fixing 2nd class teak wood panelled or panelled and glazed shutters 30 mm thick for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)
Providing and fixing the following hardware fittings of approved make.
a) ISI marked oxidised MS pressed butt hinges with necessary screws etc., complete.
i) 100x58x1.9 mm
ii) 125x65x2.12mm
b) Aluminium handles, powder coated, ISI marked to required colour or shade with necessary screws etc., complete. - 125 mm
c) Powder coated ISI marked tower bolt to required colour or shade with necessary screws etc., complete.for following sizes.
ii) 150x10mm
d) Aluminium hanging floor door stopper ISI marked powder coated to required colour or shade with necessary screws etc., complete.
i) Twin rubber stopper
e) Providing & fixing Aldrop 300mm long with 16mm dia rod, required colour or shade with necessary screws etc., complete
f) Brass CP mortice lock six levers handles of Godrej / Dorset or equivalent make with necessary screws etc., complete for single door.
g) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings.
Supplying and fixing at site, Patch fitting doors with 10mm thick clear toughened glass fixed onto S.S.Patch fittings, with floor springs & all requisite hardware such as handles, lock etc, (all of DORMA /OZONE OR equivalent make).
Providing and fixing double action hydraulic floor spring with brass cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame size 65 x 125 mm
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
Providing and fixing of sliding UPVC window with Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).the colour of the profile shall be of natural (white ) colour. The profiles used for the outer frame, shutter and mullions shall be reinforced with 1.2mm galvanized iron steel. Profile of frame & sash shall be mitred cut and fusion welded at all corners, includingdrilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
Providing and fixing factory made uPVC white colour fixed glazed ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Using R1 series with frame Height upto 0.90 m)
Removing the all kinds of sanitary fittings like EWC, Urinals,Wash hand basins including stacking of items within 50 meters lead as per direction of Engineer-in-Charge
Supplying and fixing European Water closet with cistern set comprising of. White vitreous china pedestal type water closet (European type) with seat and lid, low level white vitreous china flushing cistern (Single piece) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. with15mm CP brass stop angle cock fixed between GI and PVC inlet. and15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts with washer at both ends.
Supplying and fixing in position best quality & approved make C P toilet paper roll holder with necessary C P brass screws and washers fixed to wall etc.,complete all as specified and directed.
Supplying & fixing in position best quality & approved make C P soap container necessary including C P screws and washers fixed to wall etc., complete all as specified and directed.
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.
Supplying and fixing of CP Health faucet of Parryware or equivalent make with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.
Supplying and fixing wash hand basin suit comprising of Best quality of vitrious china countertop wash basin of approved make including 15mm powder coated piller cock,stop cock , waste coupling , bottle trap, UPVC Connection pipe 600 mm long etc of approved make.
Supply, installation, testing and commissioning of shower unit with Wall Mixer 3-in-1 System with Provisionfor both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange including over head shower and hand shower.
Providing and fixing in position best quality of approved make 15mm CP brass stop cock for geysers with necessary screws etc.complete.
Supplying and fixing in position best quality and approved make heavy quality screws down gun metal gate valves with hand wheel of the following sizes fixed to service lines including testing, making good the leakages, if any etc.,
Supplying and fixing in position best quality CP towel rod of length 600mm long with a pair of brackets flanges fixed to wall with necessary plugs screws , washers etc., complete.
Providing and fixing Towel Ring circular of Parryware 215 mm dia, with minimum distances of 3 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
Supplying, laying, jointing, testing and commissioning; uPVC(SWR) pipe (Type-B) as per IS : 13592/1992 including specials of best quality and approved make fixed to wall/floor including chasing, cutting, making the hole in walls/floors, cutting the pipes to the required size of length jointing the pipes and specials with suitable resin and testing etc.,complete all as specified and directed. (Specials at junctions must have access doors wherever required.)
a) 75 mm dia
b) 100mm dia
Providing and fixing brass curtain rods of 25 mm diameter wall thickness 1.25 mm with two brackets fixed with brass screws and wooden plugs etc; wherever necessary complete
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per the direction of Engineer-in-Charge.
Providing and laying plinth protection with 50 mm thick PCC 1:3:6 (1 cement, 3 coarse sand and 6 graded stone aggregate 20 mm nominal size) over 75 mm thick brick ballast of 40 mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth with additional cemet mortar 1:4 a floating coat of neat cement finish and filling the construction joints with sand and bitumen etc; complete all as specified and directed
Providing and applying two coats of synthetic enamel paint of approved brand and shade over a coat of primer including preparation of surface to steel surfaces and applying approved brand putty on following surfaces at all levels and locations etc complete
Providing and fixing at all height 12.5mm thick Gypsum board false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the angle hangers of 25 x 25 x0.55 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick botton wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @ 230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting. Note Rates are of inclusive of all the design and projections made in the ceiling will be measured flatly and will not be paid extra cost whatsoever.
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
Providing and placing on terrace (at all floor levels) polyethylene water storage of capacity 1000 ltrs tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Two or more coats of French spirit polishing of approved brand and manufacture on new works including a coat of wood filler
Providing and fixing ball valve (brass) 25 mm dia of approved quality, High or low pressure, with plastic floats complete :
Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and fixing of sliding UPVC door with Three track three panels sliding door with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).the colour of the profile shall be of natural (white ) colour. The profiles used for the outer frame, shutter and mullions shall be reinforced with 1.2mm galvanized iron steel. Profile of frame & sash shall be mitred cut and fusion welded at all corners, includingdrilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note All the fittings are included in the rate i.e 6mm thick sheet glass, locking arrangements , handles and mortice lock six levers.
Reception Counter of 1050 mm height with granite top 20 mm thick bottom panel made out of 18mm MR grade plywood cladded with 1 mm laminate / 4 mm thick teak veneer for front, sides and one No. of storage unit to have one drawer and one shutter having shelf with locking arrangement and key board pull out tray, all exposed edges to have teakwood beading, all hardware fitting in S/S finish, all exposed surface with melamine polish etc., complete all as per drawing.
False ceiling Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm.
Providing of designer wall papers digital pattern made out of High-Quality Non-woven Material: Crafted from premium non-woven material, wallpaper non-adhesive wallpaper for wall is breathable, eco-friendly, and resistant to wear and tear. Roll Size: Measuring 53 cm x 9.5 cm (±3%), this wall paper for wall decor is ideal for covering large wall areas seamlessly.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size (Oval shape 450x350 mm) (outer dimensions) with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Providing and fixing uplasticised 15 mm dia PVC connection pipe of length 450 mm long with brass unions :
Providing and fixing C.P. brass angle valve 15 mm dia for basin mixer and geyser points of approved quality conforming to IS:8931 :
Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..
Excavation work in any type of soil by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and laying 80 mm thick C.C paver block of M-30 grade with approved colour and design and pattern factory made chamfered edge, cement concrete paver block in footpath, parks, lawns,drive ways, ligh trafic parking etc, of required strength and, thickness & size/shape made by table vitratory method using PU mould laid in required colour and pattern over 50 mm thick compacted bed of sand compacting and proper embedding/laying of inter locking paver blocking paver block into the sand bedding layer through vibrator compaction by using plate vibrator filling joints with sand and cutting of paver block as required size and pattern finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
18mm thick cement plastering on external surfaces of brick or concrete surfaces in two layers consisting of 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) top coat mixed with integral water proofing compound over a base coat 12mm thick cement mortar 1:5 (1 cement : 5 coarse sand), finished sand face etc., complete at all levels and locations.
Stone tile work 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade. for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade.
Supply and fixing WPC fluted panels to be installed in front façade with joist system ( air compressed nails )including all materials and labour scafoldings fixing to required shape and size with zero visible joints, water proof, heat resistance, eco friendly complete all as per the directiion of engineer-in-charge.
Supply and installation of 6mm thick Exterior grade F- Quality panels of standard size of one of the following: 1.3 x 2.8 m /1.854 x 2.8 m / 1.3 x 4.1 m / 1.854 x 4.1 m, with both side décor of FunderMax make or equivalent .The panels must be duromer high-pressure laminates (HPL) as per EN 438-6 type EDF with norm conformity as per EN 438-7 manufactured using NT Technology (Non-fading high performance acrylic polyurethane surface technology) conforming to norms with CE Mark. Panels are double hardened including acrylic polyurethane resin which is thermally cured under high pressure. The panel should have passed salt spray test for 24 hours, possess performance sustainability certificate for more than 25 years and proof of experience in handling similar type of work in India for more than 10 years. Material should be class B / class 1 complying with NBC 2016, ASTM E 84, BS 476 – 7 Installation of these panels must be done by MBE Rivets(with Fixed and Sliding Points) with minimum recommended Aluminum T section of 75x37x2 mm thick and L section 40x37x2.8mm thick held by Wall Bracket with Wind load and Dead load slot as per design, anchored by standard Hilti/Fischer or equivalent make anchor fasteners along with Thermal Separator. Installation of the HPL Panels will be done using Rear Ventilated Principles only which is ensured by providing gaps of 20 mm at top and bottom(for free flow of air behind the façade) for the façade and using the framework with no horizontal section for internal wall panelling.
SCHEDULE OF CREDIT B/R
Unservicable doors and windows area not exceeding 3.0 sqm each including chowkhats/frame
Dismantling tile work in floors and dados laid in cement mortar including stacking materials within 50 meters lead : for thickness of tiles 10mm to 25 mm
Removing the all kinds of sanitary fittings like EWC, Urinals,Wash hand basins, towel rail, soap dish, health faucet, pillar tap stop cock, bib taps, wall mixer, shover etc including stacking of items within 50 meters lead as per direction of Engineer-in-Charge
Unservicable water storage tanks of any description and any capacity
Unservicable GI pipes 15mm of any description
Unservicable GI pipes 20mm of any description
Unservicable GI pipes 25mm of any description
Unservicable GI pipes 40mm of any description
INTERNAL ELECTRIFICATION (TF III)
Rewiring for Supply, fixing light point / fan point,exhaust fan point call bell point, socket point with 1100 volt grade 1.5 sq.mm FRLS PVC insulated multistranded copper conductor single core cable as earth wire in Existing surface/recessed steel/PVC conduit with modular switch, Modular plate, dismaltling as required, like- taking down Old unserviceable point wiring including switches,sockets, light fittings, GI boxes, GI Earth wire, phenolic laminated sheet, and other fittings/fixers including Ceiling Fans/Exhaust Fans and kept in safe custody and transported to department stores and to be issued to contractor under Scedule of credit,( PVC Conduit if required,Modular switches, sockets any type, Call Bell, Light fitings, Ceiling Fans, Exhaust Fans etc to be measured and paid separately) including cutting and making good the disturbed surfaces, matching with the existing surfaces, complete all as specified and as directed.
a) One Light point controlled by one 6A Switch
b) One ceiling fan point controlled by one 6A Switch and regulator.
c) One Exhaust fan point controlled by one 6A Switch
d) One bell point controlled by one bell push
e) One 6Amps socket controlled by one switch in same board.
f) One 6Amps socket controlled by one switch in Independent board.
Supply, fixing and Rewiring for One Light point controlled by Two Two way 6A switches, with 1100 volt grade 1.5 sq.mm FRLS PVC insulated multiustranded copper conductor single core cable as earth wire in Existing surface/recessed steel/PVC conduit dismaltling as required, ike- taking down Old unserviceable point wiring including switches, GI boxes, GI Earth wire, phenolic laminated sheet, and other fittings/fixers and kept in safe custody and transported to department stores, cincluding cutting and making good the disturbed surfaces, matching with the existing surfaces omplete all as specified and as directed.
Supply drawing following sizes of FRLS PVC insulated copper conductor single core cable as earth wire (for 3x2.5 sq.mm single core cable Phase, Neutral and Earth wire connected to the earth dolly for Power point in Existing surface recesses steelPVC conduit including dismantling like- taking down Old unserviceable One 16Amps switch and socket, GI boxes, GI Earth wire including sub main wiring from DB to Socket in Independent board, including cutting and making good the disturbed surfaces, matching with the existing surfaces complete all as specified and as directed.
Supply drawing following sizes of FRLS PVC insilated multistranded copper conductor single core cable 1100 volt grade (for 3x4 sq.mm single core cable, Phase, Neutral and Earth wire as earth wire connected to the earth dolly, Power point in Existing surface recesses steelPVC conduit including dismantling and including taking down Old unserviceable One 32 Amps Metal clad boxes, GI Box,GI Earth wire, socket and MCB including sub main wiring from DB to AC Socket in Independent board, complete all as specified and as directed.
Supplying and fixing for Existing of following sizes medium class PVC conduit along with accessories in surface/recess including cutting thewall, chases, pinning in, making good to facings where ever required and pointing in cement mortar 1:3 ration to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc; and cutting chases for concealed conduit wiring, making good and painting as required etc, cutting not exceeding 10cm girth including cutting and making good the disturbed surfaces, matching with the existing surfacesComplete all as specified and directed.
a) 20 mm dia
b) 25 mm dia
Supply and fixing for Point Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated multistranded copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required and including cutting and making good the disturbed surfaces, matching with the existing surfaces, complete all as specified and as directed.
a) One Light point controlled by one 6A Switch
b) One ceiling fan point controlled by one 6 A Switch and electronic fan regulator of 100W step type with concealed MS Fan hook box.
c) One Exhaust fan point controlled by one 6A Switch
d) One bell point controlled by one bell push
e) One 6Amps, 3/5Pin Socket outlet for Same/Dependent Board complete all as specified and as directed.
f) One 6Amps, 3/5Pin Socket outlet for Independent board complete all as specified and as directed.
g) Staff calling bell with 16 Nos indicators with board complete all as specified and as directed..
Supply, Fixing and Point wiring for Twin control light point with 1100 volt grade 1.5 Sq.mm FRLF PVC insulated multistranded copper conductor single core cable in surface, \/ recessed medium class PVC conduit, Two two way modular switch, modular plate, suitable GI box and conduit, Two two way modular switches, modular plate, suitable GI box earthing the point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable etc. Connected to the earth dolly, as required, complete all as specified and as directed.
Supplying and fixing for Modular type Bell push switch piono 6Amp single phase one Way on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fixing for Modular type switch piono 6Amp single phase one Way on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fixing for Modular type switch piono 6Amp single phase Two Way on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fixing for Modular type Socket outlet 6Amp 3/5 pin single phase on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fixing modular Blanking plate on the existing modular plate and switch boxes excluding modular plate as required, complete all as specified and as directed.
Supply, Fixing and Wiring for circuit/ submain along with earth wire with the following size 1100V grade PVC insulated multistrand FRLS Copper conductor wires in and including suitable size medium gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs etc. including cutting and making good the disturbed surfaces, matching with the existing surfaces complete all as specified and as directed.
a) 2 runs of 2.5 Sq.mm wires with 1 run of 2.5 Sq.mm wire in and including 25 mm Dia PVC Conduit (For Lighting Circuit).
b) 2 runs of 2.5 Sq.mm wires with 1 run of 2.5 Sq.mm wire in existing PVC Conduit (For lighting circuit).
c) 2 runs of 4 Sq.mm wires with 1 runs of 4 Sq.mm wires in and including 25mm dia PVC Conduit (For 16A sockets).
d) 2 runs of 6 Sq.mm wires with 1 runs of 6 Sq.mm wires in and including 32mm dia PVC Conduit (For AC sockets).
Supply and fixing and wiring for circuit/submain wiring alongwith eareh wire with the 4 run of 10 Sq.mm with 2 run of 6 sq.mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required and including cutting and making good the disturbed surface match with the existing surface, complete all as specified and as directed. (For TPN DB).
Supply and fixing and wiring for circuit/submain wiring alongwith eareh wire with the 4 run of 16 Sq.mm with 2 run of 6 sq.mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required and including cutting and making good the disturbed surface match with the existing surface, complete all as specified and as directed. (For TPN DB).
Supplying and fixing non rigid metallic PVC conduit 25 mm dia medium grade along with accessories in surface/recess including cutting chases, pinning in, making good to facings where ever required and pointing in cement mortar 1:3 ration to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc; and cutting chases for concealed conduit wiring, making good and painting as required etc, cutting not exceeding 10cm girth. Complete all as specified and directed.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the exising surface/recessed steel/PVC conduit as required.
a) 2 runs x 2.5 Sqmm and 1R x 2.5 Sqmm
b) 4 runs x 2.5 Sqmm and 2R x 2.5 Sqmm
c) 2 runs x 1.5 Sqmm and 1R x 1.5 Sqmm
Supplying and fixing suitable size G.I box with modular plate and cover in front or surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6A modular switch, connection etc including cutting and making good the disturbed surfaces, matching with the existing surfaces, omplete all as specified and as directed.
Supplying and fixing following size / module G.I box alongwith modular base & cover plate for modular switches in recess etc as required. including cutting and making good the disturbed surfaces, matching with the existing surfaces, complete all as specified and as directed.
a) 12 Module (200 MM x 150MM)
b) 8 Module (125 MM x 125MM)
c) 6 Module (200 MM x 75MM)
d) 3 Module (100 MM x 75MM)
e) 1 or 2 Module (75mmX75mm)
Supply, Installation,Testing & Commissioning of the following type LED light fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The fixtures shall be complete with all prewired upto the terminal block. All fixtures shall be supplied with lamps. The Catalogue Numbers refers to Philips Make and taking down of the unservicebale fittings, complete all as specified and as directed.
a) 20 W Surface mounted LED 4 Feet Length Luminaire (Philips : BN308C LED 40S-6500 L120 PSU WH), complete all as specified and as directed.
b) 1 x 12 W Surface Mounted LED Luminaire (Philips Cat No : SM250C LED 12S-6500PSU WH), complete all as specified and as directed.
c) 12 W Recess Mounted down light fixture (Philips Cat No : DN195B LED 20S-6500PSU WH S2), complete all as specified and as directed.
d) 33 W Even Glow 120 LEDs/metre strip light (Each No 5 mtr Length) (Philips model No.582241), complete all as specified and as directed.
e) 10 W Surface mounted LED 1 Feet Length Luminaire (Mirror lamp), complete all as specified and as directed.
f) LED fancy fitting 5 x 12 W model No.37932-270lm/3000K (Philips) complete all as specified and as directed.
g) Spot light thin trim deep recessed COB LED dimmable spot light - 7W model No. 350lm/3000K/4000K/6500K (Philips) completed all as specified and as directed.
h) Head spot light 1 x 50W Model No. 581879 (Philips) completed all as specified and as directed.
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
a) 4 way (4 + 12), Double door
b) 8 way (4 + 24), Double door
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
100 A.30KA.FPMCCB
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing of 6A to 32A rating 230 Volt, 10KA, ‘C’ Curve miniature circuit breaker single pole suitable for inductive load of suitable capacity and including all necessary connections ,testing and commissioning etc complete all as specified and as directed.
Supply and fixing single pole blanking plate in the existing MCB DB complete etc. As required, complete all as spoecified ands as directed.
45W LED street light fitings with GI bend pipe (Philips : BRP052 LED 045 CW SLMR FG S1 PSU GR)
SCHEDULE OF CREDIT E/M
Existing Unserviceable light point wiring with all fittings and fixtures.
Existing Unserviceable Ceiling Fan point wiring with all fittings and fixtures.
Existing Unserviceable Exhaust Fan point wiring with all fittings and fixtures.
Existing Unserviceable 6A Socket point wiring with all fittings and fixtures in same board.
Existing Unserviceable 6A Socket point wiring with all fittings and fixtures in Independent board.
Existing UnserviceableTwo Way light point wiring with all fittings and fixtures.
Existing Unserviceable tube light Fittings any type and size.
Existing Unserviceable Socket 6Amp.
Existing Unserviceable Socket 16Amp.
Existing Unserviceable Switch 6A any type.
Existing Unserviceable Calling bell any type.
Existing Unserviceable Sub Main wiring 3x2.5 sq.mm
Existing Unserviceable Sub Main wiring 3x4 sq.mm
Existing Unserviceable Sub Main wiring 3x6 sq.mm, 4x10 and 2x6, 4x16 and 2x6
Existing Unserviceable DB SPN 6/8/12 way any type with MCB SP/DP/SPN.
Existing Unserviceable Earthing any type complete with platr, GI pipe/ GI wire/Funnel etc.
Existing Unserviceable DB TPN 12 way any type with MCB SP/DP/SPN/TPN etc.
Existing Unserviceable PVC Conduit any type.
Existing Unserviceable Service cable of size 16Sq.mm 4Core.
Old Unserviceable Tube Light Point any type
POWER WIRING (TF III )
Supply, Fixing and Wiring for circuit/ submain along with earth wire with the following size 1100V grade PVC insulated multistrand FRLS Copper conductor wires in and including suitable size medium gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs etc. including cutting and making good the disturbed surfaces, matching with the existing surfaces complete all as specified and as directed.
a) 2 runs of 4 Sq.mm wires with 1 runs of 4 Sq.mm wires in and including 25mm dia PVC Conduit (For 16A sockets).
b) 2 runs of 6 Sq.mm wires with 1 runs of 6 Sq.mm wires in and including 32mm dia PVC Conduit (For AC sockets).
MODULAR POWER SOCKETS
Supply, erection, testing and commissioning of the following switch sockets with anodised G.I. Box, front plate and fixing screws etc .
6/16 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 16 Amps SP Switch.
Supply and fixing of factory made 20A, 1Ph Metalclad socket with plug top & 20A SPMCB in MS box including all fixing accessories.
Providing and fixing of maintenance free earthing which consists of 40mm Dia, standrad length (as per Equipment Supplier) electrode capsule, filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancing compound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil.
Supply and laying of following size strips including all necessary inter connections with earth station and equipments.
a) 50 X 5 mm Hot dip GI strip
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (a) 50mm Dia
TELEPHONE AND LAN (TF III)
Supply and laying of 25mm dia, heavy gauge PVC. conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc.,
Supply and fixing of Telephone socket outlet (RJ11) with anodised GI box with front plate and fixing screws on the existing modular olate and switch box including connectios but excluding modular plate etc. As required, complete all as specified and as directed..
Supply and fixing of TV outlet with anodised GI box with front plate and fixing screws.
Supply and laying of 2pair 0.5mm dia PVC insulated Copper conductor Telephone wire conforming to DOT Specifications in already laid PVC Conduit including necessary interconnections.
Supplying and drawing co-axial TV Cable RG-6 grade, 0.7mm soild copper conductor PE insulated, shielded with fine tinned copper-braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required.
Supply and installation of 10 pair Krone connectors in MS junction box complete as required.
Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. (a) 50mm Dia
EXTERNAL ELECTRIFICATION (TF III)
Supply of armoured aluminium 1.1 kv grade under ground cable LT XLPE UG cable.
a) 3.5C x 150 Sqmm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
a) 3.5C x 150 Sqmm
Supply and fixing indoor type LT panel board incoming250 Amps MCCB 36KA-01 Nos with RYB indication lamps, Toggle switch voltmeter, ammeter and suitable size bus bars out going 100 Amps MCCB, 35KA - 05 Nos.
CIVIL WORKS (TF II & TF IV)
Demolishing cement concrete manually/ by mechanical means including disposal of material Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Excavation work in any type of soil by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..
1:4:8 (1 Cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate )RA).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns.
Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts.
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level Cement mortar 1:6 (1 cement : 6 coarse sand)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: (part 3) (Board with BIS certification marks)
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will not be paid for separately.
For the purpose of measurement the entire treated surface will be measured.
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Dismantling tile work in floors and dados laid in cement mortar including stacking materials within 50 meters lead : for thickness of tiles 10mm to 25 mm
Providing and laying double charged polished finish Vitrified tiles of size 600x600x 10 mm thick in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Supplying and laying approved make and shade anti skid ceramic tile of thickness upto 6mm and size 300 x 300mm for flooring laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.30 kg/Sqm, including curing and pointings with white cement and matching pigment etc., Complete all as directed by the Engineer-in-Charge
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as perish : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).
Providing and fixing 1st quality ceramic glazed wall tiles of size 300x450x7mm thick conforming to IS 15622 (thickness to be specified by the manufacturer), of approved make in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kgs per sqm , including pointing in white cement with mixed pigment of matching shade complete
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
18 mm thick cement plastering on external surfaces of brick or concrete surfaces in two layers of 6 mm thick cement mortar 1:3 ( 1 cement 3 fine sand ) top coat mixed with integral water proofing compound over a base coat 12 mm thick cement mortar 1:5 (1 cement : 5 coarse sand), finished sand face etc; complete at all levels and locations. ) for 100 sqm /100) = 0.81/Sqm rate to be added extra
15 mm thick plastering in cement mortar 1:6 (1 cement: 6 fine sand) on internal surfaces of walls finished smooth and even etc., complete at all levels and locations
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Two coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, over a coat of water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. including applying additional coats wherever required to achieve even shade and colour.
Providing and applying cement based putty of average thickness 1mm, of approved brand and manufacturer, over plastered surface to prepare the surface even and smooth complete
Removing water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Finishing walls with Acrylic smooth exterior paint of required shade : (two or more coat applied @ 1.67 kgs/10 sqm over and includig priming coat of exterior primer applied @ 2.20 kg/10 Sqm
Finishing walls with Acrylic smooth exterior paint of required shade : (two or more coat applied @ 1.67 kgs/10 sqm over and includig priming coat of exterior primer applied @ 2.20 kg/10 Sqm
Dismantling doors,windows and clerestory windows (steel or wood) shuter including chowkhats ,architrave ,holdfast etc, complete and stacking within 50 meters lead
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Providing and fixing 2nd class teak wood panelled or panelled and glazed shutters 30 mm thick for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)
Providing and fixing the following hardware fittings of approved make.
a) ISI marked oxidised MS pressed butt hinges with necessary screws etc., complete.
i) 100x58x1.9 mm
ii) 125x65x2.12mm
b) Aluminium handles, powder coated, ISI marked to required colour or shade with necessary screws etc., complete. - 125 mm
c) Powder coated ISI marked tower bolt to required colour or shade with necessary screws etc., complete.for following sizes.
ii) 150x10mm
d) Aluminium hanging floor door stopper ISI marked powder coated to required colour or shade with necessary screws etc., complete.
i) Twin rubber stopper
e) Providing & fixing Aldrop 300mm long with 16mm dia rod, required colour or shade with necessary screws etc., complete
f) Brass CP mortice lock six levers handles of Godrej / Dorset or equivalent make with necessary screws etc., complete for single door.
g) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings.
Supplying and fixing at site, Patch fitting doors with 10mm thick clear toughened glass fixed onto S.S.Patch fittings, with floor springs & all requisite hardware such as handles, lock etc, (all of DORMA /OZONE OR equivalent make).
Providing and fixing double action hydraulic floor spring with brass cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame size 65 x 125 mm
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall not be paid separately)
Providing and fixing of sliding UPVC window with Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).the colour of the profile shall be of natural (white ) colour. The profiles used for the outer frame, shutter and mullions shall be reinforced with 1.2mm galvanized iron steel. Profile of frame & sash shall be mitred cut and fusion welded at all corners, includingdrilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
Providing and fixing factory made uPVC white colour fixed glazed ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Using R1 series with frame Height upto 0.90 m)
Removing the all kinds of sanitary fittings like EWC, Urinals,Wash hand basins including stacking of items within 50 meters lead as per direction of Engineer-in-Charge
Supplying and fixing European Water closet with cistern set comprising of. White vitreous china pedestal type water closet (European type) with seat and lid, low level white vitreous china flushing cistern (Single piece) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. with15mm CP brass stop angle cock fixed between GI and PVC inlet. and15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts with washer at both ends.
Supplying and fixing in position best quality & approved make C P toilet paper roll holder with necessary C P brass screws and washers fixed to wall etc.,complete all as specified and directed.
Supplying & fixing in position best quality & approved make C P soap container necessary including C P screws and washers fixed to wall etc., complete all as specified and directed.
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.
Supplying and fixing of CP Health faucet of Parryware or equivalent make with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.
Supplying and fixing wash hand basin suit comprising of Best quality of vitrious china countertop wash basin of approved make including 15mm powder coated piller cock,stop cock , waste coupling , bottle trap etc of approved make.
Supply, installation , testing and commissioning of shower unit with Wall Mixer 3-in-1 System with Provisionfor both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange including over head shower and hand shower.
Providing and fixing in position best quality of approved make 15mm CP brass stop cock for geysers with necessary screws etc.complete.
Supplying and fixing in position best quality and approved make heavy quality screws down gun metal gate valves with hand wheel of the following sizes fixed to service lines including testing, making good the leakages, if any etc.,
Supplying and fixing in position best quality CP towel rod of length 600mm long with a pair of brackets flanges fixed to wall with necessary plugs screws , washers etc., complete.
Providing and fixing Towel Ring circular of Parryware 215 mm dia, with minimum distances of 3 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
Supplying, laying, jointing, testing and commissioning; uPVC(SWR) pipe (Type-B) as per IS : 13592/1992 including specials of best quality and approved make fixed to wall/floor including chasing, cutting, making the hole in walls/floors, cutting the pipes to the required size of length jointing the pipes and specials with suitable resin and testing etc.,complete all as specified and directed. (Specials at junctions must have access doors wherever required.)
a) 100mm dia
a) 75mm dia
Providing and fixing brass curtain rods of 25 mm diameter wall thickness 1.25 mm with two brackets fixed with brass screws and wooden plugs etc; wherever necessary complete
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per the direction of Engineer-in-Charge Ref item No 3 above
Providing and laying plinth protection with 50 mm thick PCC 1:3:6 (1 cement, 3 coarse sand and 6 graded stone aggregate 20 mm nominal size) over 75 mm thick brick ballast of 40 mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth with additional cemet mortar 1:4 a floating coat of neat cement finish and filling the construction joints with sand and bitumen etc; complete all as specified and directed
Providing and applying two coats of synthetic enamel paint of approved brand and shade over a coat of primer including preparation of surface and applying approved brand putty on following surfaces at all levels and locations etc complete
Providing and fixing at all height 12.5mm thick Gypsum board false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the angle hangers of 25 x 25 x0.55 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick botton wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @ 230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting. Note Rates are of inclusive of all the design and projections made in the ceiling will be measured flatly and will not be paid extra cost whatsoever.
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
Providing and placing on terrace (at all floor levels) polyethylene water storage of capacity 1000 ltrs tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Two or more coats of French spirit polishing of approved brand and manufacture on new works including a coat of wood filler
Providing and fixing ball valve (brass) 25 mm dia of approved quality, High or low pressure, with plastic floats complete :
Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
TV Panel cum Partition unit of 600mm deep with 2 Nos. openable shutters made of 6mm thick premium lacquer glass with automatic opening and closing , two shelves and a drawer knob openable withhydraulic soft closing mechanism kit 2 Nos verticle opening, made out of 18mm ply wood with 3.5mm thick teak veneer, machine pressed. all exposed edges to have teak wood lipping with melamine polish and lamination to internal surfaces including wall panelling/Cladding with fluted panel design for TV unit etc; all complete as per directions of engineer-in-charge.(Openable shutters and Hardware shall include brass tower bolts, 50 mm long 'C' type Antique brass handles, Magnetic catchers and locks are included in the rates
Reception Counter of 1050 mm height with granite top 20 mm thick mirror polished edges to be rounded and polished with bottom panel made out of 18mm MR grade plywood cladded with 1 mm laminate / 4 mm thick teak veneer for front, sides and one No. of storage unit to have one drawer and one shutter having shelf with locking arrangement and key board pull out tray, all exposed edges to have teakwood beading, all hardware fitting in S/S finish, all exposed surface with melamine polish etc., complete all as per drawing.
Cupboard cum dressing unit of 600mm deep with 4 Nos. openable shutters, two vertical dividers and two shelves made out of 18mm ply wood with 3.5mm thick teak veneer, all exposed edges to have teak wood lipping with melamine polish and limination to internal surfaces etc; all complete as per directions of engineer-in-charge.(Openable shutters and Hardware shall include brass tower bots, 100mm long 'C' type brass handles, Magnetic catchers and locks will not be paid separately) The rate are all inclusive fittings and fixtures.
Providing of designer wall papers digital pattern made out of High-Quality Non-woven Material: Crafted from premium non-woven material, this wallpaper non-adhesive wallpaper for wall is breathable, eco-friendly, and resistant to wear and tear. Roll Size: Measuring 53 cm x 9.5 cm (±3%), this wall paper for wall decor is ideal for covering large wall areas seamlessly.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing fancy bib tap chromium plated 15 mm dia bore complete all as directed by engr incharge.
Providing and fixing factory made single extruded WPC 12 mm thick (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall not be paid separately)
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydrarlic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolst, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall not be paid separately the contractor shall quote the rates accordingly)
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm.
Providing and fixing cuboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edege banding tape with hot glue by edege bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be included in the rates quoted)
Supply and fixing fancy type Kitchen sink tap swan neck tap half turn 15 mm bore chromium plated parryware
Providing and laying Vitrified tiles of 600 x 600 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately).
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size (Oval shape 450x350 mm) (outer dimensions) with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Providing and fixing uplasticised 15 mm dia PVC connection pipe of length 450 mm long with brass unions :
Providing and fixing C.P. brass angle valve 15 mm dia for basin mixer and geyser points of approved quality conforming to IS:8931 :
Providing Bio-Septic tank 40 users of storage capacity 3000 ltrs with treatment capacity of 2800 litre in white colour having no maintenance cost with 4 chambers round in shape, working temperature -5 degree to 50 degree. Anaeroric digestion to treat bio-degradable waste and sewage sludge as part of waste management system a technology patented from DRDO. 2.40 M x 1.20 M complete installation will be done by the vender. The cost includes installation charges.
12 mm thick Fiberglass Reinforced Plastic (F.R.P.) manhole cover of size 600 x 600 mm with frame , fire retardant grade unsaturated polyester resin, Man Hole/Chamber cover with frame /Fittings to be installed in the driveway designed for withstand heavy traffic as per load class D400 of EN-124 Heavy Load & C250 of EN-124.Top surface of cover will have to be anti-skid /anti slip with tread pattern as approved by BPCL. It should be designed for high structural performance to withstand load, fatigue and wear without eterioration. Light load. Lifetime warranty (10 years) and water tightness for at least 5 years from date of installation
Supply and fixing WPC fluted panels to be installed in front façade with joist system ( air compressed nails) including all materials and labour scafoldings fixing to required shape and size with zero visible joints, water proof, heat resistance, eco friendly complete all as per the directiion of engineer-in-charge.
Supply and installation of 6mm thick Exterior grade F- Quality panels of standard size of one of the following: 1.3 x 2.8 m /1.854 x 2.8 m / 1.3 x 4.1 m / 1.854 x 4.1 m, with both side décor of FunderMax make or equivalent .The panels must be duromer high-pressure laminates (HPL) as per EN 438-6 type EDF with norm conformity as per EN 438-7 manufactured using NT Technology (Non-fading high performance acrylic polyurethane surface technology) conforming to norms with CE Mark. Panels are double hardened including acrylic polyurethane resin which is thermally cured under high pressure. The panel should have passed salt spray test for 24 hours, possess performance sustainability certificate for more than 25 years and proof of experience in handling similar type of work in India for more than 10 years. Material should be class B / class 1 complying with NBC 2016, ASTM E 84, BS 476 – 7 Installation of these panels must be done by MBE Rivets(with Fixed and Sliding Points) with minimum recommended Aluminum T section of 75x37x2 mm thick and L section 40x37x2.8mm thick held by Wall Bracket with Wind load and Dead load slot as per design, anchored by standard Hilti/Fischer or equivalent make anchor fasteners along with Thermal Separator. Installation of the HPL Panels will be done using Rear Ventilated Principles only which is ensured by providing gaps of 20 mm at top and bottom(for free flow of air behind the façade) for the façade and using the framework with no horizontal section for internal wall panelling.
SCHEDULE OF CREDIT B/R
Unservicable doors and windows area not exceeding 3.0 sqm each including chowkhats/frame
Dismantling tile work in floors and dados laid in cement mortar including stacking materials within 50 meters lead : for thickness of tiles 10mm to 25 mm
Removing the all kinds of sanitary fittings like EWC, Urinals,Wash hand basins, towel rail, soap dish, health faucet, pillar tap stop cock, bib taps, wall mixer, shover etc including stacking of items within 50 meters lead as per direction of Engineer-in-Charge
Unservicable water storage tanks of any description and any capacity
Unservicable GI pipes 15mm of any description
Unservicable GI pipes 20mm of any description
Unservicable GI pipes 25mm of any description
Unservicable GI pipes 40mm of any description
INTERNAL ELECTRIFICATION (TF II & IV)
Rewiring for Supply, fixing light point / fan point,exhaust fan point call bell point, socket point with 1100 volt grade 1.5 sq.mm FRLS PVC insulated multistranded copper conductor single core cable as earth wire in Existing surface/recessed steel/PVC conduit with modular switch, Modular plate, dismaltling as required, like- taking down Old unserviceable point wiring including switches,sockets, light fittings, GI boxes, GI Earth wire, phenolic laminated sheet, and other fittings/fixers including Ceiling Fans/Exhaust Fans and kept in safe custody and transported to department stores and to be issued to contractor under Scedule of credit,( PVC Conduit if required,Modular switches, sockets any type, Call Bell, Light fitings, Ceiling Fans, Exhaust Fans etc to be measured and paid separately) including cutting and making good the disturbed surfaces, matching with the existing surfaces, complete all as specified and as directed.
One Light point controlled by one 6A Switch
One ceiling fan point controlled by one 6A Switch and regulator.
One Exhaust fan point controlled by one 6A Switch
One bell point controlled by one bell push
One 6Amps socket controlled by one switch in same board.
One 6Amps socket controlled by one switch in Independent board.
Supply, fixing and Rewiring for One Light point controlled by Two Two way 6A switches, with 1100 volt grade 1.5 sq.mm FRLS PVC insulated multiustranded copper conductor single core cable as earth wire in Existing surface/recessed steel/PVC conduit dismaltling as required, ike- taking down Old unserviceable point wiring including switches, GI boxes, GI Earth wire, phenolic laminated sheet, and other fittings/fixers and kept in safe custody and transported to department stores, cincluding cutting and making good the disturbed surfaces, matching with the existing surfaces omplete all as specified and as directed.
Supply drawing following sizes of FRLS PVC insulated copper conductor single core cable as earth wire (for 3x2.5 sq.mm single core cable Phase, Neutral and Earth wire connected to the earth dolly for Power point in Existing surface recesses steelPVC conduit including dismantling like- taking down Old unserviceable One 16Amps switch and socket, GI boxes, GI Earth wire including sub main wiring from DB to Socket in Independent board, including cutting and making good the disturbed surfaces, matching with the existing surfaces complete all as specified and as directed.
Supply drawing following sizes of FRLS PVC insilated multistranded copper conductor single core cable 1100 volt grade (for 3x4 sq.mm single core cable, Phase, Neutral and Earth wire as earth wire connected to the earth dolly, Power point in Existing surface recesses steelPVC conduit including dismantling and including taking down Old unserviceable One 32 Amps Metal clad boxes, GI Box,GI Earth wire, socket and MCB including sub main wiring from DB to AC Socket in Independent board, complete all as specified and as directed.
Supplying and fixing for Existing of following sizes medium class PVC conduit along with accessories in surface/recess including cutting thewall, chases, pinning in, making good to facings where ever required and pointing in cement mortar 1:3 ration to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc; and cutting chases for concealed conduit wiring, making good and painting as required etc, cutting not exceeding 10cm girth including cutting and making good the disturbed surfaces, matching with the existing surfacesComplete all as specified and directed.
20 mm dia
25 mm dia
Supply and fixing for Point Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated multistranded copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required and including cutting and making good the disturbed surfaces, matching with the existing surfaces, complete all as specified and as directed.
One Light point controlled by one 6A Switch
One ceiling fan point controlled by one 6 A Switch and electronic fan regulator of 100W step type with concealed MS Fan hook box.
One Exhaust fan point controlled by one 6A Switch
One bell point controlled by one bell push
One 6Amps, 3/5Pin Socket outlet for Same/Dependent Board complete all as specified and as directed.
One 6Amps, 3/5Pin Socket outlet for Independent board complete all as specified and as directed.
Staff calling bell with 8 Nos indicators with board complete all as specified and as directed..
Supplying ang fixing Call Bell/ Buzzer suitable for single phase, 230 volts on wall/ surface as required, complete all as specified and as directed.
Supplying and fixing for Modular type Bell push switch piono 6Amp single phase one Way on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fiing for Modular type switch piono 6Amp single phase one Way on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fiing for Modular type switch piono 6Amp single phase Two Way on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fiing for Modular type Socket outlet 6Amp 3/5 pin single phase on the modular plate including necessary connection, complete all as specified and as directed.
Supply and fixing modular Blanking plate on the existing modular plate and switch boxes excluding modular plate as required, complete all as specified and as directed.
Supply, Fixing and Wiring for circuit/ submain along with earth wire with the following size 1100V grade PVC insulated multistrand FRLS Copper conductor wires in and including suitable size medium gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs etc. including cutting and making good the disturbed surfaces, matching with the existing surfaces complete all as specified and as directed.
2 runs of 2.5 Sq.mm wires with 1 run of 2.5 Sq.mm wire in and including 25 mm Dia PVC Conduit (For Lighting Circuit).
2 runs of 2.5 Sq.mm wires with 1 run of 2.5 Sq.mm wire in existing PVC Conduit (For lighting circuit).
2 runs of 4 Sq.mm wires with 1 runs of 4 Sq.mm wires in and including 25mm dia PVC Conduit (For 16A sockets).
2 runs of 6 Sq.mm wires with 1 runs of 6 Sq.mm wires in and including 32mm dia PVC Conduit (For AC sockets).
Supply and fixing and wiring for circuit/submain wiring alongwith eareh wire with the 4 run of 10 Sq.mm with 2 run of 6 sq.mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required and including cutting and making good the disturbed surface match with the existing surface, complete all as specified and as directed. (For TPN DB).
Supplying and fixing non rigid metallic PVC conduit 25 mm dia medium grade along with accessories in surface/recess including cutting chases, pinning in, making good to facings where ever required and pointing in cement mortar 1:3 ration to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc; and cutting chases for concealed conduit wiring, making good and painting as required etc, cutting not exceeding 10cm girth. Complete all as specified and directed.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the exising surface/recessed steel/PVC conduit as required.
2 runs x 2.5 Sqmm and 1R x 2.5 Sqmm
2 runs x 1.5 Sqmm and 1R x 1.5 Sqmm
Supplying and fixing suitable size G.I box with modular plate and cover in front or surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6A modular switch, connection etc including cutting and making good the disturbed surfaces, matching with the existing surfaces, omplete all as specified and as directed.
Supplying and fixing following size / module G.I box alongwith modular base & cover plate for modular switches in recess etc as required. including cutting and making good the disturbed surfaces, matching with the existing surfaces, complete all as specified and as directed.
12 Module (200 MM x 150MM)
8 Module (125 MM x 125MM)
6 Module (200 MM x 75MM)
3 Module (100 MM x 75MM)
Supply, Installation, Testing & Commissioning of the following type LED light fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The fixtures shall be complete with all prewired upto the terminal block. All fixtures shall be supplied with lamps. The Catalogue Numbers refers to Philips Make and taking down of the unservicebale fittings, complete all as specified and as directed.
20 W Surface mounted LED 4 Feet Length Luminaire (Philips : BN308C LED40S-6500 L120 PSU WH), complete all as specified and as directed.
1 x 12 W Surface Mounted LED Luminaire (Philips Cat No : SM250C LED 12S-6500PSU WH), complete all as specified and as directed.
12 W Recess Mounted down light fixture (Philips Cat No : DN195B LED 20S-6500PSU WH S2), complete all as specified and as directed.
33 W Even Glow 120 LEDs/metre strip light (Each No 5 mtr Length)(Philips model No.582241), complete all as specified and as directed.
10 W Surface mounted LED 1 Feet Length Luminaire (Mirror lamp), complete all as specified and as directed.
LED fancy fitting 5 x 12 W model No.37932-270lm/3000K (Philips) complete all as specified and as directed.
Spot light thin trim deep recessed COB LED dimmable spot light - 7W model No. 350lm/3000K/4000K/6500K (Philips) completed all as specified and as directed.
Head spot light (Bed side lamp) model No. 581879/1x50W (Philips) completed all as specified and as directed.
Wall lantern (Bulk head fitting) model No. 1739330/12W (Philips) completed all as specified and as directed.
Supply and fixing for Fan Regulator step and modular type fix on board 230 volts single phase, complete all as specified and as directed.
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4 way (4 + 12), Double door
8 way (4 + 24), Double door
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
100 A.30KA.FPMCCB
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing of 6A to 32A rating 230 Volt, 10KA, ‘C’ Curve miniature circuit breaker single pole suitable for inductive load of suitable capacity and including all necessary connections ,testing and commissioning etc complete all as specified and as directed.
Supply and fixing single pole blanking plate in the existing MCB DB complete etc. As required, complete all as spoecified ands as directed.
45W LED street light fitings with GI bend pipe (Philips : BRP052 LED 045 CW SLMR FG S1 PSU GR)
POWER WIRING (TF II & IV )
Supply, Fixing and Wiring for circuit/ submain along with earth wire with the following size 1100V grade PVC insulated multistrand FRLS Copper conductor wires in and including suitable size medium gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs etc. including cutting and making good the disturbed surfaces, matching with the existing surfaces complete all as specified and as directed.
2 runs of 4 Sq.mm wires with 1 runs of 4 Sq.mm wires in and including 25mm dia PVC Conduit (For 16A sockets).
2 runs of 6 Sq.mm wires with 1 runs of 6 Sq.mm wires in and including 32mm dia PVC Conduit (For AC sockets).
MODULAR POWER SOCKETS Supply, erection, testing and commissioning of the following switch sockets with anodised G.I. Box, front plate and fixing screws etc .
6/16 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 16 Amps SP Switch.
Supply and fixing of factory made 20A, 1Ph Metalclad socket with plug top & 20A SPMCB in MS box including all fixing accessories.
Providing and fixing of maintenance free earthing which consists of 40mm Dia, standrad length (as per Equipment Supplier) electrode capsule, filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancing compound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil.
Fixing of copper/ G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
a) 20 X 3 mm Hot dip GI strip
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (a) 50mm Dia
TELEPHONE AND LAN (TF II & IV)
Supply and laying of 25mm dia, heavy gauge PVC. conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc.,
Supply and fixing of Telephone socket outlet (RJ11) with anodised GI box with front plate and fixing screws on the existing modular olate and switch box including connectios but excluding modular plate etc. As required, complete all as specified and as directed..
Supply and fixing of TV outlet with anodised GI box with front plate and fixing screws.
Supply and laying of 2pair 0.5mm dia PVC insulated Copper conductor Telephone wire conforming to DOT Specifications in already laid PVC Conduit including necessary interconnections.
Supplying and drawing co-axial TV Cable RG-6 grade, 0.7mm soild copper conductor PE insulated, shielded with fine tinned copper-braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required.
Supply and installation of 10 pair Krone connectors in MS junction box complete as required.
Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. (a) 50mm Dia
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.94 MB
Tender_Enquiry.pdf
Tender Documents • 0.33 MB
BOQ_942190.xls
BOQ • 1.06 MB
Annexure_I_NIT.pdf
Tender Documents • 0.37 MB
BGB_Proforma.pdf
Tender Documents • 0.24 MB
Annexure_II.pdf
Tender Documents • 0.20 MB
Annexure_II_III_V.pdf
Tender Documents • 0.69 MB
Annexure_IV.pdf
Tender Documents • 0.38 MB
Annexure_V.pdf
Tender Documents • 0.39 MB
GCC.pdf
Tender Documents • 1.22 MB
Annexure_III.pdf
Tender Documents • 0.42 MB
Download all tender documents and submit your bid