Works Services for Renovation of building No P 744 SSC at AF Stn Pune

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) as in surface channel, coping etc.

M & L for levelling & ramming,rodding the floors including watering as required to level the surface for sub base complete all as specified and directed by Engr- in- Charge.

M & L for cement concrete in sub floors, sub-bases,floors and pavings type D2, 1:4:8 75 mm thick complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring

M & L for Vetrified ceramic tiles of Dark shade10mm thick (Square/rectangular) polished , area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed complete all as specified and directed.

All as per Item No. 6 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

S&F 450x300x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed by Engineer -in- Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 15mm thick in cement motar 1:6 complete including dismantling existing kota stone skirting all as specified and directed.

M & L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10mm thick plaster in CM 1:4 including dismantling existing kota stone skirting all as specified and directed.

Providing and applying 2 mm thick Anti-static epoxy self-smoothening flooring on concrete surface having moisture content less than 5 %. Surface preparation includes grinding of concrete surface, proper cleaning, removing of loose mortar, paint residuals, curing compound residues, repairing of floor cracks and dents using epoxy putty, application of Nitoprime 25-epoxy penetrating primer for concrete surface, using brush or roller and allow to cure for 8-10 hrs(depending upon temperature). Prepare copper grid as per site condition and connect the same to earthing point. Mixing and application of Nitoflor SL Dissipative Undercoat over primed surface using suitable brush or roller as per recommended coverage as per technical datasheet. Now mixing all components of Nitoflor SL Dissipative Top Coat- Epoxy resin based static conductive self-smoothening system floor topping having Surface Resistance (BS 2050) Nitoflor SL Dissipative – 1 x 10^ 6- 1 x 10^ 9 Ohms, Compressive Strength at 7 days (ASTM C579) – 60 N/mm2, Flexural Sterngth at 7 days(BS 6319 Part 3) > 20 N/mm2, Tensile Strength at 7 days (BS 6319 Part 7) > 11.5 N/mm2, Volume Solids – 100 % using slow speed drill and poured on primed and prepared surface at 2 mm DFT. Now level the material using serrated trowel and roll the same with spiked nylon roller to remove slight trowel marks and entrapped air from the material etc. complete as per manufacturer's specification complete all as specified and directed by Engineer-in -Charge. (Note : Complete flooring work shall be executed by the authrised make Applicator.)

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

Demolition of Reinforced cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC 1:1.5:3 (type B2) using 20mm graded aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L mild steel TMT bar 10 mm dia and over cut to length bent to shape includingbbending & binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed

M&L for Mild steel TMT Bars ,8mm dia and over as in striups, spacers, lacing and binders, cut to length bent to shape required including crancking, bending spirally for hooping and including mild steel wire (annealed) not less than 0.9m dia or securing with clips complete all as specified and directed by Engineer -in-charge

M & L for Plates (plain or chequered) channels, square cut or notche (ordinary and counter sunk) forming holes, without any attachment, of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as directed by Engr-in-Charge. etc.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

M & L Rounding to edge of stone slabs one edge,such as in steps,cooking platform,and other similar situations.

Complete removal of existing roof treatment of any description and any thicknessof roof slab ,suspended floors, chajjas, landings etc,including cement mortar, bedding (But not backing ) and rubbish off premises complete all as directed by Engr-in-Charge.

Demolition of cement concrete (Unreinforced) of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended any thickness complete all as specified and directed

M & L for Brushing neat a coat of cement slurry @ 3 Kg/sqm complete all as specified and directed.

M & L for 25 mm thick PCC 1 : 3 : 6 type C-0 (using 12.5 mm graded stone aggregate) as in padding concrete for getting proper slope of roof / covering etc (using WPC 3% by wt of cement ) and it will be ensured that padding makes a proper bond with RCC slab. complete all as specified and directed. Note:-WPC shall be measured and paid seperately.

M&L for 10 mm thick in cement mortar 1:4 on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement with using WPC @200ml of WPC per 50 Kg of cement being used or by manufacturer instruction complete all as specified and as directed . Note:-WPC shall be measured and paid seperately.

M&L App based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt of reinforcement not less than 150 gms/sqm) laid on primed surface complete all as apecified and directed Engr-in-Charge.

M&L prepration of newly plastered surface and applying oil based bituminous primer @ 0.3 Ltr /Sqm complete all as specified

M&L applying Heat resisting bituminous Aluminium paint @ 0.35 Ltr/Sqm in Two coats over APP Membrane complete all as specified and directed Engr-in-Charge.

Supply only integrated liquid waterproofing compound.

M&L Providing, cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

Demolition of brick work or stone boulder masonry built in cement or cement lime mortar

M&L for Brick masonary with Fly Ash Bricks straight or curved Exc 6.00 m Mean Redius built in CM 1:6 , complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer in Charge.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Hacking out old broken glass n exc 1.5 Sqm of any thickness, size, quality or description from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3.0 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S & F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M & L for preparation of new or previously untreated surface of Steel and iron of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide,zink crome complete all as specified and directed

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including taking down metal frame etc complete all as specified and directed by Engr-in-charge

S&F of mineral fibre reinforced false ceiling tiles ( all height) of size 595X595 mm of approved texture , design and pattern . The tiles should have humidity risistance RH of 99%, Light resistance greater than 85% , thermal conductivity K=0.052-0.057 W/mK, Fire performance As per (BS476 Pt- 6&7) in true horizontal level suspended on interlockingT-grid of hot dipped all around galvanised Iron Section of 0.33 mm thick ( galvanised @120GSM) comprising of main T runner of 15 X32 mm of length 3000mm, cross T of size 15X32 mm of length 600mm to form grid module of size 600X600 mm suspended from ceiling using galvanised Mild steel item ( galvanised @ 80GSM)50mm long 8mm outer dia M-6 Dash Fastner, 6mm diameter fully threaded hanger rod upto 1000mm length and L-shaped level adjuster of size 85X25X2 mm , spaced at 1200 mm centre to centre along main T. the system should rest on perphery walls/ partition with the help of GI perimeter wall angle of size 24X24X3000mm made of 0.40mm thick sheet , to be fixed to the wall with the help of the plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S screws .The exposed bottom portion of all t- Sectionused in false ceiling support system shall be prepainted with polyster baked paints, for all height . the work shall be carried out as per specification drawing and as per the directionof of the Engr-in-charge with 16mm thick Bevelled traingular Mineral Fibre false ceiling ( NRC 0.5 to 0.6))

S & F in repair door closer hydraulically regulated of cast iron body, designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Taking down aluminium powder coated partition wall etc complete all as directed by Engineer-in-charge.(Note:-Sch of credit of Aluminium section measured & weighed at site for recovery in Kg)

Taking down Chowkats or frames exc. 1.50 Sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F for powder coated aluminium frame for doors, windows, ventilators with Powder Coating (minimum thickness of powder coating 50 micron) one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F for powder coated aluminium door shutters of any colour (Thickness or powder coating not less than 50 micron) , aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S & F 6-8 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed to aluminium doors with screws ,beads complete all as specified and directed.

S & F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Sheet glass 5.5 mm thick fixed in repair ordinary quality and glazing with oil putty,beads in square exc 0.5 sq. m in each pane including hacking out old broken glass complete all as specified and directed.

S&F almunium powder coated louvers concealed type for ventilltor of size 0.60 X0.60 having arrangement of 4/6 blades fixed to almunium frame complete all as specified and directed .

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 and is to be finished even and smooth with out using extra cement complete all as specified directed with and using IWPC @ 3% BY Wt of Cement

M & L for 5mm thick cement plaster in CM 1:3 on fair faces of brick or concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement etc complete.

M & L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth without using extra cement etc complete.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down ,applying 3mm thick wall care putty in 3 Coats and two coat of DISTEMPERING WITH 1ST QUALITY acrylic distemper (over a coat of alkali resistant primer) having VOC content less than 50 gm per ltr of approved manufacturere if reqd shed of colour complete as per manufactures specifications, all as specified and directed by Engr-in-Charge,

M & L for Preparation of newly plastered surfaces/un plastered surfaces and applying two coat of white washing on ceiling complete all specified and directed.

M&L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing to walls all as specified.

M&L for Preparation of newly plastered surfaces/un plastered surfaces and applying two coat of white washing to walls complete all as specified and directed.

M & L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on surfaces of on ceiling /soffits of slabs, chajjas all as specified and as directed at site.

M & L for prepartion of newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for complete removal of existing treatment of walls plastered or unplastered applying Two or more coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Taking up or down steel tubing 25mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F GI pipe medium grade 25 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

Taking down and refixing shutter after repair of any description n. exc 1 Sqm each in same opening complete all as specified and as directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

Taking down Chowkats or frames n exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21

S & F for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F for 200 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S & F in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. and removing to store complete all as specified and directed.

S & F in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S & F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

S & F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F Two way bib tap 15 mm size with wall flange complete all as specified and directed.Cera Cat art No F1020163

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including concrete bedding complete all as specified and directed.

S & F in repairs PVC valveless syphonic action type flushing cistern 10 ltr capacity low level white with inlet, ball valve, float and handle including brackets and 32 mm PVC flush pipe complete all as specified and directed.

S & F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete in repair

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repairs Pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

M&L15 mm bore bib tap fancy type fixed in repair for chromium plated cast copper alloy with wall flange complete all as specified and directed.

S & F Vitreous China urinals, bowl full Stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as specified and directed.

S & F for Chromium plated Urinal spreader of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F for Self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe /Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M & L For Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

Treatment of soil using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Removing demolished building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance exc 1.0 km or beyond. The rates, include transpark, loading, unloading and stacking at the destination complete all as specified and directed.(per load =0.62 Cum minimum)

S & F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Use and Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) etc for rough finished surface complete all as specified and directed by Engineer -in-charge

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontalor sloping and similar work , exc 5cm but not exc.10cm wide complete all as specified and directed by Engineer -in-charge

Dismantling ofstructural steel work in?cluding doors, gates but excluding framed truss etc. complete all as specified and directed by Engineer in Charge.

Supply and fix rolled mild steel as roof trusses (framed) purlins (angle, beam, tee channel) incl distance piece, cleats etc of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as directed by Engr-in-Charge.

Supply and fix Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as directed by Engr-in-Charge.

M & L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, (cut to ordinary lengths i.e. within 20mm of the length for the edges of duct complete all as directed by Engr-in-Charge. etc.

S&F Welded steel wire fabric of mesh size 25mm X25mm and n less than 2.00m dia and weight n exc 4.0 Kg/ SQm complete all as specified

M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MC distribution boards SPN, TPN & VTPN with porcelain cutouts etc all as directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire all as directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH in stove enamelled steel conduit 1100 Volts grade wire for continuous earthing complete in and including steel conduit with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

(a) One light point controlled by one switch .

(b) One Fan point controlled by one regulator/switch.

(c) One 3 pin socket 5 A on independent board.

(d) One 3 pin socket 5 A on the same switch board.

Ditto all as per item No 117.00 here-in-before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket outlet on independent board incl multistranded insulated copper earth contunuity conductor of size 2.5 Sqmm all as specified and directed by Engineer-in-Charge.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH in Casing & Caping 1100 Volts grade wire for continuous earthing complete in and including steel conduit with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

(a) One light point controlled by one switch .

(b) One Fan point controlled by one regulator/switch.

(c) One 3 pin socket 5 A on independent board.

(d) One 3 pin socket 5 A on the same switch board.

Ditto all as per item No 119.00 here-in-before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket outlet on independent board incl multistranded insulated copper earth contunuity conductor of size 2.5 Sqmm all as specified and directed by Engineer-in-Charge.

Supply and fix Socket out let 2in 1, 5 pin 5 Amp

Supply and fix switch socket combination 2 in 1, 5 A flush type.

Supply and fix switch socket combination 5 / 16 A, 5 in 1, flush type.

Supply and fix Piano type switch 5 A.

S & F Fan Regulator electronic step type complete as directed

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm.

Supply and fix high quality indoor Surface and wall mounted batten suitable for 20 Watt Aluminum T8 Tube rod 4 feet long , including LED retrofit Tube rod 20 Watt Aluminum T8 Tube rod 4 feet long 6000K colour temperature, having lumen output not less than 100 Lumen per watt & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply & Fixing LED luminaire 600 mm x 600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp sitable for roof ceiling including connecting up with driver three core flexible copper codctor cases of suitble size complete.

Taking down the existing street light fitting and Supply & fix (in Repalcement) energy saving and environmental friendly long life LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on pole/wall with and including suitable dia size bracket as per manufacturer recommendation, bracket complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified.

S&F Vertical double door Distribution board VTPN 4 way consisting of MCCB. 63A - 1 No including fixing on wall surface and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper/ aluminium thimbles including taking down old DBs alongwith cables, wire and connecting with existing cables with thimbles complete all as required on site and all as directed

S&F Vertical double door Distribution board VTPN 8 way consisting of MCCB. 100A/125A - 1 No including fixing on wall surface and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper/ aluminium thimbles including taking down old DBs alongwith cables, wire and connecting with existing cables with thimbles complete all as required on site and all as directed

S&F Vertical double door Distribution board VTPN 12 way consisting of MCCB. 160A - 1 No including fixing on wall surface and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper/ aluminium thimbles including taking down old DBs alongwith cables, wire and connecting with existing cables with thimbles complete all as required on site and all as directed

Supply and fix sheet metal enclosure MCB DB SPN double door 12 way 230 V with neutral including link and with 200 A bus bar including taking down old DBs alongwith cables, wire and connecting with existing cables with copper/ aluminium thimbles complete all as required on site and all as directed.

Supply and fix sheet metal enclosure MCB DB SPN double door 8 way 230 V with neutral including link and with 200 A bus bar including taking down old DBs alongwith cables, wire and connecting with existing cables with copper/ aluminium thimbles complete all as required on site and all as directed.

Supply and fix sheet metal enclosure MCB DB SPN double door 4 way 230 V with neutral including link and with 200 A bus bar including taking down old DBs alongwith cables, wire and connecting with existing cables with copper/ aluminium thimbles complete all as required on site and all as directed.

Taking down and Supply and fix in repair / replacement of MCCB FP 160 Amps Adjustable type with breaking capacity 25 KA including connections and testing for proper functioning complete all as specified and directed.

Taking down and Supply and fix in repair / replacement of MCCB FP 100 Amps Adjustable type with breaking capacity 25 KA including connections and testing for proper functioning complete all as specified and directed.

Taking down and Supply and fix in repair / replacement of MCCB FP 63 Amps Adjustable type with breaking capacity 25 KA including connections and testing for proper functioning complete all as specified and directed.

Supply and fix MCB SPN 240 V, 40 Amps. complete all as directed at site.

Supply and fix MCB SP 240 V ,6 to 32 Amps complete all as directed at site.

Disconneting & taking down ceiling fan of 1200 mm sweep / exhaust fan of 300 mm sweep for servicing, strip opening of fan including servicing and greasing complete at site. Re-assembling and refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors for complete fan including writing MES No all as required and directed by Engineer-in Charge. Testing complete after servicing and fixing for smooth and noise free operation.

M&L for sub main wiring with two runs of single core 6.0Sq mm Flame retardant in stove enamelled steel conduit insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping all as directed and specified . ( Note:- Two runs of 6 Sqmm copper cable & one run of 6 sqmm copper cable including stove enamelled steel conduit shall be measured & paid as one length )

M&L for sub main wiring with two runs of single core 4.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including stove enamelled steel conduit all as directed and specified . ( Note:- Two runs of 4 Sqmm copper cable & one run of 6 sqmm copper cable including stove enamelled steel conduit shall be measured & paid as one length )

S&F in replacement of sheet metal enclosure with socket plug top single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 06 to 32 Amps

Taking down old unserviceable existing LED Highbay light fittings and Supply & Fix in replacement LED Highbay Energy saving 80 W, environment friendly & robust High bay LED IP 65 luminaire with high efficacy along with suitable hook, clamps for hanging fitting in truss, ceiling etc complete, including provision of 3 core 1.5 Sqmm wire from ceiling rose to light fitting all as specified and directed

M & L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc.

Disconneting & taking down Air Curtains servicing, strip opening of fan including servicing and greasing complete at site. Re-assembling and refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors for complete all as required and directed by Engineer-in Charge. Testing complete after servicing and fixing for smooth and noise free operation.

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 300 Sqmm 3.5 core. Incl taking out old cables and making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

Taking out carefully unserviceable cable up to 300 Sqmm, 3.5 Core from trenches and relaying same after repairs in same or other indicated location after testing complete all as directed by Engr-in-Charge.( Note: Earth work, sand, bricks will be measured and paid separately)

Supply and fixing 100 mm dia DWC (Double Wall Corrugated) pipe (6 mtr length) in trenches for laying of under ground cable, HSN Code : 3917 and product code A0214100NEC012D etc complete all as specified and as directed

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in soft/loose soil etc complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in soft disintegrated rock complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point complete all as specified and directed by Engr-in-Charge.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 100 mm dia complete all as specified and directed by Engr-in-Charge.

Cutting of existing road not exc 1.5 mtr in depth and not exceeding 1.5 mtr wide including black top, sub base and WBM, well ramming in layers with watering after laying of RCC /GI pipe under road making good in all respect to match with the existing surface all as directed by E-in-charge.

Supply, installing and testing of Fire alarm control panel adressable fire dection and alaram type with capacity of two Loop panel with capacity from 99 detectors & 99 modules up to 200 detectors and modules per each loop,complete with all acessories and battery back up for 48 Hrs in stand by mode and 15 Minutes in alaram condition. Each loop shall support analog/addressable devices maximum capacity and have TCP/IP facility and Qwerty key pad for programming and including relay module, Control Module, Zone Module, Fault Isolator, power supply module addon modules. The panel shall be as per tech specification UL listed RS 232 communication port complete in all respect and all as specified and directed.

Supply and fix adressable smoke Detectors Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified.

Supply, install, testing and comissioning of adessable break glass manual call point including sunken boxes, with built in monitor module will all acessories and signal indicator complete as per tech specification and shall be UL listed complete.

Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of +5 DB 1000 mtrs range with starter and all connected items all as specified.

Supply & lay FRLS 4 core 1.5 sqmm (red Colour) armoured multi stranded copper conductor heavy duty cable saddled in wall/ceiling, truss etc all as specified and directed by engineer-in-charge

Supply, Installation Testing & Commissioning of Active Repeater Panel to be integrated via RS485 network card with Fire Alarm Control Panel,larger display Full colour 800 x 480 LCD with resistive touch screen and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels. The Panel shall have compliant with EN54-2, EN54-4 and complete all as specified and directed by Engr-in-Charge.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets complete all as specified and directed by Engr-in-Charge.

Taking down carefully from roof / wall of the building loose / hanging / deshaped / GI strip/ aluminium strip / copper strips of any size & type including unserviceable insulators etc complete all as specified and directed.

Supply and fix air termination single pointed aluminium 12 mm dia & 300 mm long including nuts & bolts for fixing air termination rod to pole/ pipe duly insulated by providing appropriate insulator all as required at site. complete all as specified and directed.

Refixing of serviceable air termination single pointed aluminium rod complete all as specified and directed.

M & L Test point terminal block made of gun metal or phosphorus bronze size incliding 3 Nos 8 mm dia 25 mm long hex. Head screw all as specified and directed by Engr-in-charge.

Refixing of serviceable Test point terminal block complete all as specified and directed.

M & L aluminium strip 25 x 3.15 mm with saddles amd fixing secres etc for roof conductors and down conductors all as specified and directed by Engr-in-charge

Refixing of serviceable aluminium strips of any size and fixing on porecelin insulators 'T' type placed not more than 50 cm apart & fixed with srews & nut bolts complete all as specified and directed. Note : M&L Porcelain insulators with nuts bolts and screws will measured and paid separately

S&F epoxy insulators suitable of aluminium strip of 25x3mm size with nut bolts/ screws for fixing of copper/ aluminium / GI strips on stone / PCC block walls etc complete all as specified and directed.

M & L Galvanised iron stip 32 x 6 mm burried in ground all as specified and directed by Engr-in-charge

M & L Earthing complete with galvanised steel earth plate electrode 60 x 60 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 below normal ground level, connected to galvanised earth iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completeion.

Material and labour for GI tubing light grade 40 mm bore fixed to walls or pole complete all as specified and as directed.

M & L for providing cement concrete in roof of type B1 1:2:4 20 mm graded aggregate in roof kerbs or mug stops, rounded or chamfered on deges all specified

M/s Kirti Enterprises (BID ID -3340104)

tulsani associates (BID ID -3340019)

UNIQUE ENGINEERS (BID ID -3340162)

om construction (BID ID -3335857)