Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹23.8 L
EMD Value
₹47,600
Closing Date
26 Oct 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Drilling of Two Nos. of New Bore wells and MISC in ACD
9712
TENDER NOTICE/NCP/29/24-25/08
Works
Contract Section Civil-FMD-Bangalore
₹0
₹47,600
26 Oct 2024
21 Sept 2024
21 Sept 2024
26 Oct 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Geo-Physical Survey by Geologist compartment for locating feasibility of water point including required instrument, labour, etc., all complete as directed by Engineer-in-Charge.
Drilling of 160/165mm dia bore well up to required depth with necessary drilling plants and equipment( drilling rigs, compressor etc., including site clearance if required, drilling through various ground strata necessary underground blasting of rock, tests for quantity and analysis of under ground water for quality including transportation of plant, equipment, men, materials, etc., all complete as per site condition and as directred by Engg-in charge
Drilling of bore above 0 feet – upto 100 feet
Drilling of bore above 100 feet – upto 200 feet
Drilling of bore above 200 feet – upto 300 feet
Drilling of bore above 300 feet – upto 400 feet
Drilling of bore above 400 feet – upto 500 feet
Drilling of bore above 500 feet – upto 600 feet
Drilling of bore above 600 feet – upto 700 feet
Drilling of bore above 700 feet – upto 800 feet
Drilling of bore above 800 feet – upto 900 feet
Drilling of bore above 900 feet – upto 1000 feet
Supplying, jointing and fixing to required depth 160mm /165mm dia Mild Steel casing pipe with 2.50mm thick and MS collar heavy grade of approved quality including threading, jointing to collars, welding, inserting to required depth, etc., all complete as per site condition and as directed by Engineer in Charge. (MS casing pipe and collars contractors own supply and exposed portion will be painted with anticorrosive paint)
Supplying, joining and Fixing to required depth UPVC slotted/filter pipe (borewell pipe) 125mm to 140mm dia and class II confirming to IS 4985 of approved quality, threading and jointing to collars with chemical solution, inserting to required depth with necessary fittings and fixtures, etc., complete as per site condition and as directed by the Engineer-in-Charge.
Supplying, joining and fixing to required depth PVC/UPVC Casing pipe 250mm (10") dia of heavy duty calss II confirming to IS 4985 of approved manufacture for borewell casing to avoid crack forming in surroundings / overburden area, etc., including jointing to collars, inserting to required depth, etc., all complete as per site condition and as directed by Engineer-in-Charge.
Supplying joining and Fixing High Density Polyethylene pipes (HDPE-80) of 32mm to 50mm dia of heavy duty of approved brand, laid in trenches at required depth, threading and jointing to collars with chemical solution with necessary Stainless steel end fixtures and fittings, etc., complete as per site condition and as directed by the Engineer-in-Charge.
Supplying, Fixing / connecting 3 core 4 Sq mm PVC insulted waterproof submersible flat cable ISI marked of approved brand brand with copper wire without joint, etc., all complete as directed by Engineer-in-Charge.
Supplying, Fixing / connecting 3 core 2.50 Sq mm PVC insulted waterproof submersible flat cable ISI marked of approved brand brand with copper wire without joint, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing Non Return Valve 32mm dia of approved make of ISI marked fixed to GI pipe with all required GI specials fixtures and fittings etc complete as per site condition and as directed by Engineer-in-Charge.
Supplying and fixing strong gun - metal valve of high pressure heavy duty 32mm dia gate valve of approved make of ISI marked with wheel/lever head fixed to GI/HDPE pipe specials fixtures and fittings, etc., complete as per site condition and as directed by Engineer-in-Charge.
Supplying, joining and laying/fixing 50mm dia Galvanised Iron (GI) pipe heavy grade conforming to IS 1239(Part II) laid in horizontal/fixed in vertical, cuttings, threading, including including supplying and fixing necessary heavy duty GI specials such as Bends, Unions, Tees, Nipples, Collars, Reducers, etc., complete as per site condition and as directed by Engineer-in-Charge.
Supplying and fixing of 150mm dia M.S borewell clamps and cap with adjustable nuts, bolts, etc., all complete as directed by Engineer-in-Charge.
Supplying, errection and commissioning of 5.H.P. Deepwell Submersible pumpset of 5 H.P 3 Phase having discharge and head may vary as per site condition, motor SS body Kirloskar/CRI/Texmo make or any other approved make ISI marked/approved including pannel baord suitable for 5 H.P (out Door), etc., all complete as per site condition and as directed by Engineer-in-Charge. (Pump to be got approved by HAL before procurement/ execution).
Supply and fixing of starter 3 phase on/off switch, indicator lamp, Ammeter/ Voltmeter, single phase preventer with MS angle leg painted with anti corrosive paint etc all complete as per site condition and as directed by Engg-in-charge
Supplying, of 3.H.P Deepwell Submersible pumpset of 3 H.P 3 Phase having discharge and head may vary as per site condition, motor SS body Kirloskar/CRI/Texmo make or any other approved make ISI marked/approved including pannel baord suitable for 3 H.P (out Door), etc., all complete as per site condition and as directed by Engineer-in-Charge (Pump to be got approved by HAL before procurement/ execution).
Errection and commissioning of 3.H.P Deepwell Submersible pumpset, etc., all complete as directed by Engineer-in-Charge.
Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)/Bitominoue concrete manually / by mechanical means including disposal of material within 50 metres lead, etc., aal complete as per direction of Engineer- in-Charge
Excavating trenches of required width for pipes, cables no exceeding 80mm dia includingexcavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.50m, including getting out the excavated soil, and then returningthe soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by Engineer-in-Charge.
Supplying, mixing and placing in position plain cement concrete M20 grade (1:1.5:3) (1 cement : 1.5 Fine aggregate : 3 graded stone aggregate of 20mm nominal size) including consolidation and curing, thickness as required including formwork if any to make good by filling mass concrete in patches of Cement Concrete/Bitominous concrete in ground floors and pavings of any thickness, etc., complete for filling and mass concrete including providing proper slopes to the finished concrete surface, etc., all complete as directed by Engineer-in-Charge.
Removing/Carting the Surplus Excavated earth and demolished debries of any kind and in any description away from LCA - ARDC/MCSRDC/ACD campus at contractor own risk by mechanical means including loading, unloading, etc., all complete as directed by Engineer-in-Charge. Note: Rate considered up to 10.0KM distance.
Cutting holes up to [30 x 30]cm through SSM/Brick Work built in cement mortar for GI pipe, etc., including making good the walls in CM 1:4, removing out the debris & depositing, etc., all complete as directed by Engineer-in-Charge.
Cutting holes up to [15 x 15]cm through Plain/Reinforced cement concrete for GI/HDPE pipe line connections, etc., including making good with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), removing out the debris & depositing, etc., all complete as directed by Engineer-in-Charge.
Half brick masonry Cement mortar 1:4 (1 cement :4 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level, etc., all complete as directed by Engineer-in-Charge.
Plastering to external brick/block wall with 20mm cement plaster with cement mortor 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Providing corrugated G.S. sheet roofing 0.80mm thick with zinc coating not less than 275gms/m² including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing enclosed type water meter of 80mm dia nominal bore (bulk type) conforming to IS : 2373 and tested by Municipal Board with bolts, nuts, rubber insertions, etc., all complete as directed by Engineer-in-Charge.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) 25mm dia pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, unions, collars, bends, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing 25mm dia gun metal gate valve with C.I. wheel of approved quality (screwed end), etc., all complete as directed by Engineer-in-Charge.
Supplying of brass gold gun metal foot valve of size 50mm dia, etc., all complete as directed by Engineer-in-Charge. complete as directed by eic.
Fixing of brass gold gun metal foot valve of size 50mm dia, etc., all complete as directed by Engineer-in-Charge.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN29.pdf
TENDER_DOCUMENT • 1.33 MB
61TB.pdf
TENDER_DOCUMENT • 2.57 MB
61PQ.pdf
TENDER_DOCUMENT • 0.21 MB
61DraftTenderDrawing.pdf
TENDER_DOCUMENT • 0.25 MB
61PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
61Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
61PB.pdf
TENDER_DOCUMENT • 0.32 MB
61ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
61Undertaking.pdf
TENDER_DOCUMENT • 0.57 MB
61PBF.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .