Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹90.1 LAccepted-AOC 5 KEDAR APARTMENTS 484 60 PARVATI MITRAMANDAL COLONY PARATI PUNE 411 009 | PUNE | PUNE | MAHARASHTRA | 411009 | 1 | Accepted-AOC Being L1 | |
| 2 | 2₹92.5 L+₹2.4 L (2.66%)Rejected-Finance | 2 | Rejected-Finance Since not L1 | |
| 3 | 3₹93.3 L+₹3.2 L (3.55%)Rejected-Finance | 3 | Rejected-Finance Since not L1 | |
| 4 | 4₹95.4 L+₹5.3 L (5.91%)Rejected-Finance KRISHNA S NO 15 6A PLOT 26 KALPATARU COLONY B WARJE NAKA PUNE 411 052 | PUNE | MAHARASHTRA | 411052 | 4 | Rejected-Finance Since not L1 | |
| 5 | 5₹1.0 Cr+₹10.5 L (11.7%)Rejected-Finance | 5 | Rejected-Finance Since not L1 |
Tender Value
₹96.9 L
EMD Value
₹1.7 L
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer RnD Secunderabad
Chief Engineer RnD Opp Jubilee bus station Picket Secunderabad
ADDITION/ALTERATION TO BLDG NO 103 OF TEG DIVISION AT HEMRL PASHAN
2023_MES_595237_1
81374
Open Tender
Civil Works
Item Rate
270 days
Pashan pune
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE I RnD Pashan
₹1.7 L
Yes
9 Aug 2023
13 May 2023
26 Jun 2023
13 May 2023
19 Jun 2023
5 Jun 2023
Amount
Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced and disposal of debris to distance exc 250 metre and not exc 500 metre out of MoD land complete all as specified and directed. Note: i) The rates are inclusive of removal for any type old water proofing treatment over to Main RCC slab. Bidders is advised to visit the site and ensure before quoting rates. ii) All the dismantled debris are required to be removed from HEMRL premises right after demolition so that process of user should not get obstructed.
Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coving, roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in benching, string, lacing courses,coping,kerbs and the likes including weathering slightly rounded or chamfered angles and throating as directed including necessary use and waste of form work complete all as specified and directed.
Material and labour for rendering of 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound (ISI marked) of approved make as per manufacturer's instructions over RCC roof slab and finished fair and even without using extra cement complete all as specified and directed. Note :Liquid water proofing compound shall be measured and paid seperately as 'Supply only rates onder relavent item of BOQ'.
Material and labour for mechanical cleaning of surface to make it free from any bituminous residue/ dirt, oil , Greece or similar material. Thereafter crack treatment by cutting open cracks and cleaning based sealent including application of Pu based primer all as directed Garrison Engineer/Engr-in-Charge.
Material and labour for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of epoxy primer @ .15 Kg per Sqm followed by two coats of polyurethane coating with 1.5 Kg per sqm in two coats etc complete per manufacturer specification and as directed by Garrison Engineer/Engr-in-Charge.
Notes : For sr item no 5 & 6 1. Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic and shall have crack bridging ability of upto 3mm as per AS NZ 4548 (ii) UV Resistance. (iii) Adhesion to concrete and shall resist 7 bars of hydrostatic pressure. (iv) Tensile strength should not less than 2.0 N/sq.mm for free film & 60 % solid content as per ASTM C 1250 (v) Elongation should not less than 300% as per ASTM D2370 (vi) Solid content by weight should not less than 60%. (vii) Air/water permeability BSEN 12390 AT 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm. (viii) Accelerated weathering (ASTM453) should Pass 1000 hours. (ix) Reaction to fire – non inflammable. 2. The work shall be executed thru auth applicator of manufecturer only. Contarctor has to provide manufecturer test certificates for the above mentioned technical parameters and PVs 3. The conractor has to submit the guarntee for 10 Years against the water proofing treatment. Make:- Bostic, Berger,Fosroc, sika, Asian
Supply only integral liquid WPC of approved make.
Taking down rolling shutter any type including top covers complete of sizes of Shutter area upto 15 Sqm all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S & F Mild Steel framed work as in doors or gates, grills, gratings, Railing of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed.
Supplied and fixed Steel rolling shutters, Thickness of laths in 1 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle.complete all as specified & directed.
Taking down rolling shutter any type including hood covers, top covers for carrying out repairs/ replacement of worn out parts such as brackets, guide, shaft, pulleys, gear wheels, gear boxes and straightning partition, side patti, press button, rails, tightening end clips, cleaning and greasing the parts in good condition and refixing for Shutter area upto 15 Sqm complete all as specified and directed. Note :- Spares replaced will be measured and paid separately as "Supply only".
Supply only the following items As per existing ( to be replaced against Ser Item No 13 here -in- before) complete all as specified and directed
(a) Heavy duty spring n.exc 45 cm long.
(b) Gear box set.
(c) Gear wheel (steel/CI).
(d) Gear worm.
(e) Shaft wheel with bearing.
(f) Gear box handle.
(g) Press button rail unit.
(h) Side guide (12 guage).
(i) End clips.
(j) Safety lever lock MS.
(k) Partition patties 75 mm wide (mild steel strip).
(l) Heavy duty shaft pipe mild steel of 40 mm dia.
(m) Heavy duty shaft pipe mild steel of 50mm dia.
(n) Top Cover (18 gauge).
(o) Mild steel flat 18 x 5mm.
S & F in repair projecting type hinges / steel handle/ and steel peg stay/ brackets for steel windows fixed with screw bolts or with welding all as specified and directed
Dismantling structural steel work including doors, gates but excluding framed truss etc.all as specified and directed
Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe290 Gde E165 all as specified and directed
Dismantling Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings all as specified and directed
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip ,fixed with self tapping screws all as specified and directed
S and F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 Thickness in 1mm all as specified and directed
Taking down cement plaster on brick or stone walls or concrete surfaces etc incld raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer in CM 1:4 mixed with integral water proofing compound finished as sand plaster complete all as specified and directed. (WPC shall be measured and paid separately)
Rendering 15 mm thick in CM 1:6 on internal surfaces of brick wall finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm thick plastering in CM 1:3 on ceiling and finished even and smooth without using extra cement complete all as specified and directed.
Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.
Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 3mm thcik wall interior wall care putty and a coat of primer.complete all as specified and directed
Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior parimer on wall complete all as specified and directed
M & L for preparation of old ceiling surfaces and applying two coats of white wash all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed
Complete removal of exisiting treatment on wall / ceiling surfaces and preparation of old wall surfaces by filling holes etc and applying two coats of acryalic weather proof exterior emulsion paint over a coat of exterior parimer on wall complete all as specified and directed
M&L for complete removal of existing treatment (Paint / distamper) on walls and applying 3 mm thick wall care putty after that applying two coat of distemper oil emulsion over a coat of alkali resistance primer on wall complete all as specified and directed.
Taking down Chowkats or frames any type exceeding 1.5 Sqm and n. exc 4 sqm each (Without taking off shutters from the frame) complete all as specified and directed
Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed
Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and refixing in the same opening. complete all as specified and directed.
M&L pressed steel frame for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed
M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete all as specified and directed.
Supply & Fix solid PVC door frame of size 50mmX47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube all as specified and directed.
Supply & Fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement all as specified and directed
Supply & Fix 125mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed
Supply & Fix 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed
Supply & Fix 125mm long Extruded aluminium alloy handles, fabricated type., anodised all as specified and directed
S&F 35mm thick factory made flush shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed.
Supply & Fix 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed.
Supply & Fix 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed all as specified and directed
Supply & Fix 125mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 all as specified and directed
Supply & Fix 150mm long Extruded brass handles, fabricated type polished all as specified and directed
Supply & Fix 150mm long Floor door stopper of brass body and tongue, with hard drawn steel spring. Fixed in floor all as specified and directed
Material and labour fo preparation of new wooden surfaces of width or girth over 10 cm and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.
Material and labour fo preparation of new or previo-usly un painted steel surfaces of width or girth over 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down chowkhats / frame incl shutterrs or Steel windows / ventilators incl shutterrs (without taking off shutters from the frame) any type and size complete all as specified and directed.
S&F aluminium sliding windows three track with two glass shutters using 5.5 mm thick tinted glass (Modi Guard) and on shutter with stainless steel wire gauge of 0.31 mm dia, 1.61 mm average aperture using powder coated aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading , screws etc complete all as specified and as directed. Note : 5.5 mm thick tinted glass and stainless wire cloth shall be measured and paid separately. Size of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.
Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.
Supply and fix stainless steel wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads all as specified and directed.
Rough cast wired glass n exc 0.5 sqm, 6.4mm thick and glazing with oil putty in square all as specified and directed
Dismantling existing tanks and removing to store of capacity exc 500 ltr n.exc 1000 ltrs complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical verticla with closed top) hoised and fixed in position all as specified in SSR Part I of capacity 1000 ltrs complete all as specified and directed.
Welding in repairs thikness of metal exc 6mm but n exc 9mm, exc 2.5cm but n exc 5cm in length all as specified and directed
Supply & Fix 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed in reapairs all as specified and directed
Supply & Fix in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210 grams)all as specified and directed
Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed
Supply and Fix 15mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed
Supply and Fix 20 mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.
Cutting chases, pinning in, making good to facings of stone / brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed
Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required all as specified and directed.
M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed
M&L for 100mm dia cast iron Bends all as specified and directed.
Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store all as specified and directed.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level all as specified and directed .
S&F 110 mm dia PVC (SWR) bend all as specified and directed
Salt glazed stone ware gully trap 150mm square type 'P' includng MS gratings suitable to 150 x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover set in CM 1:6 complete all as specified and as directed.
Supply & Fix in repairs Vitreous China wash basin, white, flat back, size 580x450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) all as specified and directed.
Supply and fix in repair long body 15mm bore chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed
Supply & Fix in repair 15mm bore fancy type long(swan) neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 650 grams) all as specified and directed
Supply & Fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed. Note: Model and design as approved by GE
Supply & Fix in repairs brass chromium plated tabular towel rail 20mm dia all as specified and directed.
Supply & Fix in repairs angular stop cock copper alloy, screwed down, high pressure, screwed both ends fancy type chromium plated for 15mm bore Min wt 400 grams all as specified and directed. Note: Model and design as approved by GE
Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed
S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket all as specified and directed.
Supply and Fix in repairs PVC connection pipe 15mm dia and 450mm long.complete all as specified and directed
S/F Vitreous China Urinal, Half stall type, white excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings. complete all as specified and directed
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) of n exc 15 cm thickness (unreinforced) all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc, laid, bedded and pointed in any mortor complete all as specified and directed
M&L for Double charged vitrified ceramic light shade tiles 10mm thick (square/Rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including and over 15mm thick screed bed CM 1:6 laying floor finishes etc complete all as specified and directed.
M&L for Double charged vitrified ceramic light shade tiles 8-9mm thick (square/Rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surface like skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 10 mm thick back coat CM 1:3 laying in vertical surface finishes etc complete all as specified and directed.
M & L Granite slab 20mm thick machine cut,in cooking platform laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types as in urinal partition etc all as directed by Engg in Charge all as specified and directed.
M & L Rounding to edges of Granite slab 20 mm th on one edge, such as in , cills, cooking platform,etc and other similar situations all as specified and directed.
M & L machine cut kota stone slab flooring 18-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6.complete all as specified and directed.
M&L 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and incliding 10mm thick backing coat in CM 1:4 all as specified and directed.
M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and incliding 15mm thick screed in CM 1:6 all as specified and directed.
M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling sub base as in floors, sub floor etc finished even and smooth all as specified and directed.
M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair all as specified and directed.
S & F glazed Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with grey cement and pigment to match the tiles shade all as specified and as directed by engineer in charge
M&L for grit cushioning below interlocking paver block incl spreading and levelling complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.
M&L providing reinfoced cement concrete (nominal mix) in cement concrete 1:2:4 Type B1(20mm graded aggregate) as chajjas etc and similar work complete all as specified and directed by Engineer-in-Charge. (Note : The rate quoted shall be deemed to include use and waste of necessary form work)
M&L TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.
M & L for Aluminium Powder coating section for door frames & hutters/partition etc including joining cleat, mullion, grills etc.sliding/openable type complete of standard sections all as specified and as directed by E-in charge.
S & F Prelaminated particle board, exterior grade,prelaminated both side with decorative choice laminations fixed with screws to timber frame work 12 mm thick all as specified and directed by Engineer-in-Charge.
M&LCement concrete type B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in flooring all as specified and directed by Engineer-in-Charge.
M&L Providing and applying 3 to 3.5mm thick, anti-static, self smoothening flooring on concrete surface having moisture content less than 5%, Electrical resistance of floor surface to earth between 50 Kilo Ohms to 2 Mega Ohms measured with wet electrode. Surface preparation includes grinding of concrete surface, proper cleaning, removing of loose mortar, paint residuals, curing compound residues and existing joints shall be open & joint edges shall be repaired by Epoxy putty followed by application of NITOPRIME 25- Epoxy Resin Based Primer for concrete surface using brush or Rooller and allow curing for 8-10 hours (Depending upon Temperature). Mixing of base, hardner, and filler components of NITOFLOOR EU5- High stength sel smoothening Epoxy underlay using slow speed Drill and poured on prepared surface at 1.5mm DFT all as specified over copper strip grid work made out of using 25mmx0.5mm thick. copper strips forming One Square Metre grid jointly of surface by pasting suitable adhesive and connect the same to earthing point complete all as specified and directed.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) of n exc 15 cm thickness (unreinforced) all as specified and directed by Engineer-in-Charge.
M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100 mm thick as in sub base all as specified and directed by Engineer-in-Charge..
M&L Cement concrete type B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstanding all as specified and directed by Engineer-in-Charge..
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' thickness of slab 100mm all as specified and directed by Engineer-in-Charge.
Demolition of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exe 1.5m wide and not exe 1.5m wide and not exe 1.5m in depth and getting out in hard/dense soil completeall as specified and directed by Engineer-in-Charge.
Material and labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in fondation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
M & L Walling of random rubble, uncoursed stone masonary built in cement mortar 1:6 all as specified and directed by Engineer-in-Charge..
M & L extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses20 mm deep in granite or trap stone all as specified and directed by Engineer-in-Charge..
M&L Cement concrete in surface channel and drain in type B-2 1:2:4 (12.5mm graded aggregate) all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick in CM 1:4 on fair faces of stone masonry surfaces finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge.
Removing excavated material to a distance upto 250m and depositing where directed at a level not exe 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge..
Returning filling in including spreading ,levelling , watering & well ramming in layers not exe 25cm complete all all as specified and directed by Engineer-in-Charge..
Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc.all as specified and directed by Engineer-in-Charge.
Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in fondation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
Dismantling fencing wire mesh, any type all as specified and directed by Engineer-in-Charge.
Demolition of stone masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles
M & L Walling of random rubble, uncoursed stone masonary built in cement mortar 1:6. but except stone
M & L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:3) all as specified and directed by Engineer-in-Charge.
M & L Joist, channel, angle, or tee sections, fixed independently, without connection plate,as in fencing post etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)
S&F of mild steel angles,bars, flats etc as in supports for posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc, flat iron fillets (For securing wire mesh etc.,) including all necessary drilling,bolting or riveting,etc., and similar work conforming to fe 410-0 or Fe 310-all as specified and directed by Engineer-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed by Engineer-in-Charge.
Supply only Chain link MS galvanised fencing, any size or type all as specified and directed by Engineer-in-Charge.
Mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm & n exc 10cm long all as specified and directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces any description over 10 cm width /girth and applying two coats of synthetic enamel paint all as specified and directed by Engineer-in-Charge..
Taking down copper/aluminium normal / flame proof point wiring Steel conduit pipe (light, fan, socket or power) complete, including switches, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc.all as specified and directed by Engineer-in-Charge.
Taking down copper/aluminium normal / flame proof sub main wiring in Steel conduit pipe any type complete, including etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etcall as specified and directed by Engineer-in-Charge.
Taking down unservicable FLP tube light fitting / wellglass fittings all as specified and directed by Engineer-in-Charge.
Taking down flameproof SSC single phase / three phase completeall as specified and directed by Engineer-in-Charge.
Supply and fix PVC FRLS Armoured Copper cable of 1.5 sqmmx 3 core including saddling on wall / surface all as specified and directed by Engineer-in-Charge.
Supply and fix PVC FRLS Armoured Copper cable of 2.5 sqmmx 3 core including saddling on wall / surface all as specified and directed by Engineer-in-Charge.
Supply and fix PVC FRLS Armoured Copper cable of 4 sqmm x4 core including saddling on wall / surface all as specified and directed by Engineer-in-Charge.
Supply and fix PVC FRLS Armoured Copper cable of 6 sqmmx 4 core including saddling on wall / surface all as specified and directed by Engineer-in-Charge.
Supply and fix PVC FRLS Armoured Copper cable of 10 sqmmx 4 core including saddling on wall / surface all as specified and directed by Engineer-in-Charge .
S&F Flameproof switch of LM 6 body, rotary switch, SP, 16 Amps for ON / OFF light / fan point to operate on single phase 230 Volts, AC with termination box certified by CIMFR and PESO certified IS-2145 all as specified and directed by Engineer-in-Charge..Make:- Shyaam Switchgear Cat Part No-SSPL/2C/1010 / Flexpro / Baliga
S&F flameproof switch socket combination suitable for 2P+E (3 Pin)16 Amps, 250 volts including plug and top, LM-6 body, certified by CIMFR and PESO, ISI marked all as specified and directed by Engineer-in-charge Make:- Shyaam Switchgear Cat Part No SSPL/2C/1010 / Flexpro / Baliga
Supply and fix flameproof switch socket combination suitable for 3P+E 25 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked all as specified and directed by Engineer-in-charge. Make:- Shyaam Switchgear Cat Part No SSPL/2C/1010 / Flexpro / Baliga
S&F flameproof switch socket combination 4P+E (5 Pin) suitable for 32 Amps, 415 volts including plug and top, LM-6 body, certified by CIMFR and PESO , ISI marked all as specified and directed by Engineer-in-charge. Make:- Shyaam Switchgear Cat Part No SSPL/2C/1010 / Flexpro / Baliga
Supply and fix flameproof switch socket combination suitable for 4P+E 40 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked all as specified and directed by Engineer-in-charge. Make:- Shyaam Switchgear Cat Part No SSPL/2C/1010 / Flexpro / Baliga
S&F Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 80 Watt with lumen out put not less than 8000 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with LED COB / SMD (Bridge, Cree, Citizen) including suitable electronic including necessary fixing arrangments and connecting up complete all as specified and directed by Eng-in charge.Make:- Shyaam Switchgear Cat Part No SSPL/1251 / Flexpro/ Baliga
S & F Flameproof LED Well Glass Light Fitting suitable for 40 Watt, product in Aluminum Die casted alloy LM6 IP rating - IP66 of Gas Gr. IIA, IIB Certified by CIMFR Dhanbad with ISI marking with and including all accessories, Led chip, lamp, Driver holders Heat Resistant Clear Toughened ‘Type‐ A’ Glass etc internally prewired complete all as directed and specified.Make:- Shyaam Switchgear Cat Part No SSPL/1233 / Flexpro/ Baliga
S&F Flameproof / Weatherproof LED 2 x 20 W Tube light fitting with lumen out put not less than 8000 Lumens, body made out of cast alluminium alloy LM6 Construction certified by CIMFR and PESO , ISI marked including suitable electronic including necessary fixing arrangments and connecting up complete all as specified and directed by Engineer-in-charge Make:- Shyaam Switchgear / Flexpro / Baliga.
M & L for taking down ceiling fan / flame proof exhaust fan of any sweep and servicing and refixing at same place after painting of ceiling fan / wall mounted fan / exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed by Engineer-in-Charge..
Supply and fix flameproof-weatherproof ceiling fans 48'' size single phase in cast aluminium LM6 with fan regulator complete all as specified and directed.Make:- Shyaam Switchgear Cat Part No SSPL/CF/193-ceiling fan & SSPL/2C/1010-regulator / Flexpro/ Baliga
M & L for point wiring with 1.5 sqmm size, PVC insulated, unsheathed 1100 volts grade, single core multi stranded copper conductor cable ( FRLS) drawn into and including PVC conduit medium grade 20 mm dia with all fittings and accessories fixed concealed (incl cutting & chases in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface ) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 1.6 mm thick sheet suitable for fixing including one continuous run of PVC insulated ( green colour ) 1.5 sqmm size solid copper conductor cable earth wire and connected to earth dolly complete all as specified and directed. Note : Verticle PVC pipe should be concealed from ceiling to switch board all as requires at site of the following
a) One light point controlled by one switch one way
b) One exhaust/ fan point controlled by one switch.
c) One 5 Amps socket outlet point on independent board controlled by one switch.
All as per item No.152 above but power point wiring with 4.0 Sqmm single core PVC insulated unsheathed cable with stranded copper conductor for one switch socket outlet, 5/15 Amps multi purpose on independent board including PVC unsheathed copper conductor of 4.0 sqmm as earth wireall as specified and directed by Engineer-in-Charge.
M & L for point wiring with 1.5 sqmm size, PVC insulated, unsheathed 1100 volts grade, single core multi stranded copper conductor cable ( FRLS) drawn into and including PVC conduit medium grade 20 mm dia with all fittings and accessories fixed on ceiling surface/ concealed in wall and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 1.6 mm thick sheet suitable for fixing including one continuous run of PVC insulated ( green colour ) 1.5 sqmm size solid copper conductor cable earth wire and connected to earth dolly complete all as specified and directed. Note : Verticle PVC pipe should be concealed from ceiling to switch board all as requires at site of the following (a) Two light point controlled by one way switch
S/F Switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed by Engineer-in-Charge.
S/F for switch socket combination 2 in 1, 3 pin, 5 Amp, flush type all as specified and directed by Engineer-in-Charge.
S/F for switch socket combination 5 in 1, 6 pin, 5A/16A flush type all as specified and directed by Engineer-in-Charge.
S/F Ceiling rose surface Bakelite, 65x50mm three terminals 230 Volts, AC Single phase all as specified and directed by Engineer-in-Charge.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed by Engineer-in-Charge.
Sub main wiring with 2 runs of 4 sqmm single core, multistranded PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including PVC conduit pipe of suitable size with one run of 1 X 4.0 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and directed. Note: 2 runs of 4 sqmm and 1 run of 4sqmm single core pvc insulated copper conductor and 1 run of pvc conduit measured as one unit.
Sub main wiring with 4 runs of 6 sqmm single core, multistranded PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn in existing conduit pipe with one run of 2 X 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and directed. Note: 4 runs of 6 sqmm and 2 run of 6sqmm single core pvc insulated copper conductor and 1 run of pvc conduit measured as one unit.
Supply & fix LED 20 W light fitting 4 feet x 1 complete with all accessories including internally prewired all as specified and as directed
Supply and fix Energy saving and environmental friendly long life LED street light 45 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10 kV Built-in Surge Protection Device all as specified and directed by Engineer-in-Charge.
Supply and fix new generation, IP 65 LED 15 watt post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications all as specified and directed by Engineer-in-Charge..
S&F Suitable shape street light fitting bracket made out of GI Pipe 40 mm dia med grade or of suitable size as per requirement and shape, clamps made out from MS flat of size 40 mm x 6 mm with nuts and bolts (length of pipe should not less than 1.5 m ) and applying single coat of aluminium paint over a coat of red primer painting complete all as specified and directed .
Supply and fix GI pipe light grade 50mm dia insert in PCC/Brick work at entrance/exist gate column for fixing of gate light fitting complete all as directed.
Supply and fix environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 28 watt of Make Havells or equivalent make all as specified and directed
Supply and fix Double compression Brass gland Chromium plated of 3/4 inch size all as specified and directed by Engineer-in-Charge..
Supply and fix Double compression Brass gland Chromium plated of 1 inch size all as specified and directed by Engineer-in-Charge. .
Supply and fix Double compression Brass gland Chromium plated of 11/4 inch size all as specified and directed by Engineer-in-Charge.
Supply and fix 16 SWG HOT DIPPED GALVANISED/ POWDER COATED with coupler plates cable tray size 100x 50mm of 2 RM Each length including with nuts, bolts, washers (9G1) and all accessories for mounting and supporting the cable tray system, alongwith vertical bends, bends, , if required through wall cutting and making good surface of disturbed area all as specified and directed. Note : Cost of fittings such as vertical supports , tees , elbows , nut bolts and supporting clamps / angle channel etc is deemed to be included in the quoted rates .
Supply and fix 16 SWG HOT DIPPED GALVANISED/ POWDER COATED with coupler plates cable tray size 150x 75mm of 2 RM Each length including with nuts, bolts, washers (9G1) and all accessories for mounting and supporting the cable tray system, alongwith vertical bends, bends, , if required through wall cutting and making good surface of disturbed area all as specified and directed. Note : Cost of fittings such as vertical supports , tees , elbows , nut bolts and supporting clamps / angle channel etc is deemed to be included in the quoted rates .
Supply and fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps , 10KA, 415 volts complete all as specified and directed.
Supply and fix wall fans 300 mm size single phase complete all as specified and directed.
S&F in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 10 KA, 415 volts from wall surface and fixing (AC Socket) for Split AC all as directed and specified.
Supply and fix non metallic exhaust fan of size 250 mm sweep with louvers single phase 240 volt with louvers including cutting hole of suitable dia for fixing of exhaust fan and making good to the disturbed surfaces to match with the existing complete all as specified and directed by Engineer-in-Charge
Supply and fix FLP Exhaust fan of size 300 mm with louvers single phase 240 volt , 0.5 HP, 1414 RPM including cutting hole of suitable dia for fixing of exhaust fan and making good to the disturbed surfaces to match with the existing complete all as specified and directed by Engineer-in-Charge
Taking down / dismantling all existing cable from old panel board carefully and remove old panel bard, tracing incoming cable in ground , excavate from ground without any damage , clean it properly and connect cable to new panel board with cable gland and new lugs and restore the power supply to building.
Out going a) MCB TPN, 40 Amps, 50 Hz, 10 KA 'C' curve-6 Nos b) MCB TPN 63 Amps, 50 Hz, 10KA 'C' curve -6 Nos c) MCB SP 20 A -16 Nos.'C' curve d) MCB SP 10 A -8 Nos.'C' curve
Out going a) MCB TPN 40 Amps, 50 Hz,10 KA 'C' curve -10 Nos b) MCB TPN 63 Amps, 50 Hz,10 KA 'C' curve -03 Nos c) MCB SP 32 A -10 Nos. 'C' curve d) MCB SP 20 A -10 Nos. 'C' curve e) MCB SP 10 A -8 Nos.' C' curve
M&L for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip 32 x 6 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 chamber cover slab, GI funnel, with GI watering pipe 20 mm bore med gde, wire mesh,with protection pipe 40 mm bore GI pipe light gde for earth lead upto 7.50 m long including testing complete all as specified and directed .
Supply & fix Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground level fixed on walls / roof with all necessary fixing arrangements complete all as specified and directed including dismantling taking out old aluminium strip. Note :- Epoxy base insulator and PCC block only will be measured and paid seperately.
S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including, 3 NOS, 8mm dia 25mm long hex, head screw complete all as specified and directed including dismantling taking out old inspection box.
Supply & fix galvanised iron of strip 32 x 6 mm burried in ground or fixed on wall with all necessary fixing arrangements complete all as specified and directed including dismantling taking out old galvanised iron strip. Note :- 1) Epoxy base insulator only will be measured and paid seperately. 2) All GI strip joints should be butt welded atleast 50 mm long.
Supply & fix Air termination, single pointed aluminium rod 12mm dia and 300mm long including dismantling taking out old air termination all as specified and directed by Engineer-in-Charge.
Supply & fix air termination single pointed aluminium rod of 12mm dia 1200mm long complete all as specified and directed by Engineer-in-Charge including dismantling taking out old air termination.
S & F earth pit indicator made out of MS sh\eet of 16 SWG of size 30 x 20 cm welded to angle of size 25 x 25 x 3 mm at a height 1 M above ground including dismantling taking out old earth pit indicator all as specified and directed by Engineer-in-Charge.
M & L epoxy base insulator of suitable size, 35mm height fixed on PCC blocks/ wall or MS angle/ Pipe or on towers with and including nut bolts and washers etc complete all as specified and directed by Engineer-in-Charge including dismantling taking out old insulator.
S & F inspection boxes / test point boxes 250 x 150 x 100 mm made out of 16 gauge MS sheet with top cover including provision of fixing of 2 Nos epoxy insulator with and including insulating PVC sheet for incoming and outgoing copper strip for proper insulation etc complete all as specified and directed.
Material & labour for PCC block of size 150 x 150 x 150mm in PCC (1:3:6) type C-1 with 20mm stone graded aggregate including necessary form / mould for fair and even surfaces, air termination rod / GI strip etc., complete all as specified and directed by Engineer-in-Charge
Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 star rated with cord less remote control and inbuilt air ioniser and plasma filter for better indoor air quality with copper condensor green gas complete all as specified and as directed by Engr-in-Charge. Make - Daikin/Hitachi/Carrier/Bluestar/Voltas. Note : Copper tubiong with insulation, core cutting and west water pipe etc or any other accessories required at site during installation to be deemed fit in the quoted rates. No any other extra cost will be entertained.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA. all as specified and directed by Engineer-in-Charge Make: V guard/Vintec/Volina
Mehta and Co.
Mourya Construction
M/S.J.V.Datar
sagar construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .