WBPHE/AE/BMSD(D)/NIeT-07 of 2025-26/1

Amount

Supply, delivery and storage of the following Pumping machinery and electrical accessories at site :

Submersible pumping machinery directly coupled with Set water proof suitable size motor having following specification :- Duty condition -233-100 LPM, Head- 44-99 Mtr Shaft-stainless steel, Impeller- S.S / GM, Outlet Size: 50/65 mm., Motor, Submersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM, Motor must be suitable for operation with star delta starter.(Test certificate along with characteristic curve should be submitted at the time of delivery). CORA 12C/17G+UMAI100-3.7/22/ others (KSB or approved make)

2.5Sq. Mm. 3 core copper water proof flat submersible cable 1100V PVC insulated & Sheathed with Bare Annealed Copper Conductor as per IS:694-2010 (Make: Finolex/ Havells/ Mescab/ Any approved)

10 Sq. Mm. 3 core Al armoured cable 1100V PVC insulated & Sheathed with Bare Al Conductor as per IS:694-2010 (Make: Finolex/ Havells/ Mescab/ Any approved)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

50 mm dia. Heavy type 26 kg/cm2 UPVC standard type column pipe (cream color) with both side threaded and one end side socketed with registered KPMG. Make: Ashirbad

3 Mtr Long

1.5 Mtr Long

50mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

50 mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve). (Make: Approved vendor list of PHED)

50 mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve). (Make: Approved vendor list of PHED)

CIDF 90°bend- 1no., CI flanged tee- 1no., blank ange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1mtr.- 1 no. etc (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Heavy type 200 mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

100 Amps 415V rewireable type porcelain base Kit-kat Fuse (Make - Havells/Other approved make of PHED )

Star-Delta Starter(with single phase preventor) having relay range of 13-21 Amps [Make:- L&T MU-G 10 FASD /Havell’s/any other approved make]

Suitable heavy type Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 6 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Making brick pillar 0.25 x 0.25 x 0.75 Mtr/Suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete.

Making brick pillar of 7 ft * 8 ft Mtr/Suitable for platform with 12mm thick plaster and net cement finish complete.

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC.

Supply & Making necessary AS PER ASTM –D-1785 & THREADED TO MATCH GI PIPE & FITTINGS AS PER IS-1239 (PART-I) Medium pipe pipe 1½" inch) protection for submersible cable from kiox box to submersible pump-motor set including supply of all specials and complete the job

Making earthing arrangement as per following -

Excavation of soil for installation of Earth electrode and filling and ramming for soft soil.

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long with TATA-Medium GI pipe with a provision to connect 25mm X 6mm GI flat strip complete with GI bolts, nuts, washers etc as required.

Supplying & fixing of earth Busbar of galvanized (Hot dip) MS flat 25mm X 6mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulator etc as required.

Connecting the equipments body to earth busbar including S&F 20mm X 3mm galvanized (Hot dip) MS flat on wall/floor with GI saddles as required and connection of equipments incld. drilling holes, with bolts, nuts, washers etc as required.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36cm X 86.36cm X 46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plaster with cement morter (inside) CI hinged inspection cover of size 36.56cm X 35.56cm with locking arrangement, GI reducer including drilling of 46nos. 12mm dia holes on the GI pipe

Extra treatment of soil by using salt and charcoal or coke for plate electrode.

Incresseing the existing tube well Casing height up to a standard level as per direction of EIC.

Supply and delivery at site of GI octagonal street light pole conical type 7 mtr. Length, Top dia 70mm, bottom dia 130mm, thick 3mm base plate 220x220x12 mm, foundation bolt M20x 700 with template and anchor plate, bracket single arm bracket 1500mm long on single side with 48.3 OD GI pipe & internal junction box (6A, SPMCB & 4-Way connector). [Make: Bansal/Utkarsh/PHED Approved]

Single arm pole

Supply and delivery at site of energy efficient LED Smart Bright street light fixture with IP66 and IK06 protected LM high pressure alluminium di cast housing with polycarbonate cover capable of delivery standard lumen output as follows .The lens plate should be bolted to the metal core PCB should not be glued . The driving current should be more than 700 mA . It should have internal surge protection of minium 4kv , lumen /watt >100, Drivier efficiency > 85% ,PF >0.95, THD<10%

Philips BRP033 LED90 CW SLR GR PSU

Erection of GI pole of length of 7 meter in RCC(1:2:4) Each foundation of 400x400mm of depth of 1300 mm below GL and 200 mm just above GL. 4 nos "J" type foundation bolt of 20 mm dia and 600 mm long grouted into RCC foundation as per base plate of pole.Projected length of 100 mm also considered for fitting with the base plate of the pole.There should be a provision of two number flexible pvc pipe of 63mm dia for cable entry as per supplied drawing.Also the foundation along material will be made as per departmental drawing and design

Supply and delivery at site of 1.1 KV grade 2 core 4 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988 for outdoor lighting along with manufactures test certificate. [Make:Gloster/Havells/Polycab/PHED Approved]Supply of cable as per actual requirement at site.

Fitting fixing above supplied LED light fitting complete with all accessories to be fixed with S&F length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required complete

Withdrawing of installed Submersible pump 2 hp (including above all system) by using chain pulley derric as per direction and satisfaction of EIC

Supply, delivery and storage of the following Pumping machinery and electrical accessories at site :

Submersible pumping machinery directly coupled with Set water proof suitable size motor having following specification :- Duty condition - 90 -17 LPM, Head- 26-118Mtr Shaft-stainless steel, Impeller- S.S / GM, Outlet Size: 65 mm., Motor, Submersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM, Motor must be suitable for operation with star delta starter.(Test certificate along with characteristic curve should be submitted at the time of delivery). CORA 3C/20+UMAI100-1.5/22/ others (KSB or approved make)

2.5 Sq. Mm. 3 core copper water proof flat submersible cable 1100V PVC insulated & Sheathed with Bare Annealed Copper Conductor as per IS:694-2010 (Make: Finolex/ Havells/ Mescab/ Any approved)

50 mm dia. Heavy type 26 kg/cm2 UPVC standard type column pipe (cream color) with both side threaded and one end side socketed with registered KPMG. Make: Ashirbad

3 Mtr Long

1.5 Mtr Long

50mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

50 mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve). (Make: Approved vendor list of PHED)

50 mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve). (Make: Approved vendor list of PHED)

Making wire net fencing of the pump platfrom(6.5 ft * 7.5 ft) by supplying and fitting fixing of Galvanised MS Angle of approved quality which will be grouted in the earth by cement concret as per dieection of EIC including an arrangement for a get with lock and key facility as per direction of EIC.

Add GST @ 18%

Add Cess @ 1%

SUNIL RABIDAS (BID ID -7601610)

SATYAJIT GHOSH (BID ID -7601552)