Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹20.7 L
EMD Value
₹41,300
Closing Date
13 Nov 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTG
57 conditions · 13 needing a document upload
Whether Document verification certificate as per standard format uploaded
Whether electrical contractor's license, supervisor's license along with PAN Card of both contractor and supervisor uploaded.
Whether documents related to all mandatory requirements as mentioned in Clause no 5 & 6 of GCC part -I, Clause no 10, 11, 14, 15 & 16 of tender form 2nd sheet have been full filled and uploaded.
Whether documents relating to exemption of payment of EMD enclosed
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer should upload copy of the following documents self-attested / digitally signed by the tenderer or authorized representative of the tendering firm along with the tender. Tenderer(s) can use Standard formats available in the tender documents.
The list of personnel / organization on hand and proposed to be engaged for the tendered work. (Please refer Para-11(iii) of tender form 2nd sheet). Standard format attached as form no.5 in tender documents.
The list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (Please refer Para- 11(iii) of tender form 2nd sheet).
The tenderer should upload the supportive documents against the i)'Type of Firm' as mentioned below: *Sole Proprietorship firm: Notarized affidavit claiming the firm to be a sole proprietor firm * Company: MOA, AOA, Power of Attorney, *Partnership Firm: Deed of Partnership, POA and ii) an undertaking for not being Blacklisted / debarred as per Annexure-A. NOTE: In case of partnership firm, they should submit individual declaration of all partners not being Blacklisted / Debarred as per Annexure-A, otherwise the offer of the tenderer will be summarily rejected.
Each partner of the partnership firm should duly submit the filled in Annexure-V separately as per IRGCC-2022; Otherwise, the offer of the tenderer will be summarily rejected. Firms other than the partnership firm have to submit it as before.
Please upload certificate (Annexure - V(A)) and is to be given by attorney/authorized signatory/ each member of Partnership firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc).
The tenderer should upload Declaration regarding "Employment / partnership etc. of Retired Railway Employees" (please refer to Para 16(a) of tender form 2nd sheet). (Use standard "Form no. 2", available in tender booklet).
The tenderer has to upload Declaration regarding relation with any Railway Employees. (Please refer to Para 16 (c) of tender form 2nd sheet). (Use standard "Form no. 6", available in tender booklet).
Should a tenderer or contractor being an individual, have member(s) of his family or in the case of partnership firm / Company / Joint Venture(JV) / registered Society / registered trust etc. one or more of his partner(s) / share holder(s) or member (s) of the family of patterner(s) / share holder (s) having share of more than 1 % in the tendering entity employed in gazetted capacity in the engineering or any other department of the Railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons.
The tenderer should upload certificate of familiarization as per Chapter -4. (Use standard "Form no. 7", available in tender booklet).
The tenderer should upload GST registration certificate and PAN card.
For all tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter or credit (LC arrangement. The tenderer shall affirm having read over and agreed to the terms and condition of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, therafter, during execution of contract (The tenderer have to submit the option take payment fro Railway through a Letter of Credit arrangement).
The tenderer should upload the bank details i.e. Name of Bank along with Bank Branch Code, Account Number as appearing in the cheque book, IFSC Code and PAN Number, dully certified by the Authorized official of of the bank to facilitate payment through ECS/NEFT/RTGS. In lieu of the bank certificate photocopy /scanned copy of a cancelled cheque and PAN card may be attached for verification of the above particular.
ELECTRICAL WORKS IN CONNECTION WITH "DEVELOPMENT OF HEAVY REPAIR SHOP AND AUGMENTATION OF SBP COACHING DEPOT".
SBP-ELECT-2026-T-300-W~ECOR
SBP-ELECT-2026-T-300-W
Open
Works - General
6 Months
Sambalpur, Odisha
₹0
₹41,300
22 Oct 2026
22 Oct 2026
30 Oct 2026
80 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 20,66,941.2 | ||
| — | 400.00 | — | — | ||
| Surface wiring of sub main with 2(1x 6 sq.mm) + 1x (2.5 sq. mm) PVC Cu. FRLS Wire from DB in PVC pipe/casing capping to AC starter points. | — | — | — | 69,004 | |
| — | 40.00 | — | — | ||
| Supply and fixing of Ceiling rose on square junction box | — | — | — | 2,856.4 | |
| — | 40.00 | — | — | ||
| Supply of 120-watt LED high bay light | — | — | — | 5,46,285.6 | |
| — | 40.00 | — | — | ||
| Fixing of 120-watt LED high bay flood light | — | — | — | 43,891.6 | |
| — | 10.00 | — | — | ||
| Supply & erection of 4 Way sheet metallic enclosure for MCB fitted with Din Rail | — | — | — | 6,687.7 | |
| — | 20.00 | — | — | ||
| SITC of 6-32Amp MCB DP, 10KA. | — | — | — | 10,748.4 | |
| — | 8.00 | — | — | ||
| Supply of AC distribution box with industrial 5 pin socket & plug with 3P MCCB-63A. | — | — | — | 46,056.56 | |
| — | 8.00 | — | — | ||
| Erection of AC distribution box with industrial 5 pin socket & plug with 3P MCCB-63A. | — | — | — | 4,946.08 | |
| — | 16.00 | — | — | ||
| SITC of Industrial plug& socket 32Amp(2P+E), | — | — | — | 36,432 | |
| — | 80.00 | — | — | ||
| Supply of Indoor LED tube light Fitting 20 watt. | — | — | — | 23,620.8 | |
| — | 123.00 | — | — | ||
| Erection, fitting/Down lighter. | — | — | — | 6,066.36 | |
| — | — | — | Light/bulkhead | ||
| — | 80.00 | — | — | ||
| Surface wiring of Light/fan/6Amp plug point in separate switch boards with 1.5 sq.mm PVC cable | — | — | — | 33,637.6 | |
| — | 40.00 | — | — | ||
| Concealed wiring of light/fan/call bell/Exhaust fan points/6Amp plug point on separate board with Flush type switch | — | — | — | 18,372 | |
| — | 15.00 | — | — | ||
| Concealed wiring of socket point 5/3 pin 6 amp with copper wire and flush type switch and socket with supply of materials. | — | — | — | 1,776.45 | |
| — | 4.00 | — | — | ||
| Concealed wiring of socket point 5/3 pin 16 Amp with copper wire and flush type switch and socket with supply of materials. | — | — | — | 1,444.56 | |
| — | 80.00 | — | — | ||
| Concealed wiring of sub main with 2(1x2.5 sq.mm) + 1x (1.5 sq.mm) PVC Cu. FRLS Wire | — | — | — | 8,793.6 | |
| — | 40.00 | — | — | ||
| Concealed wiring of sub main with 2(1x4 sq.mm) + 1x (2.5 sq.mm) PVC Cu. FRLS Wire | — | — | — | 4,865.6 | |
| — | 20.00 | — | — | ||
| Concealed wiring of sub main with 2(1x6 sq.mm) + 1x (2.5 sq.mm) PVC Cu. FRLS Wire | — | — | — | 3,363 | |
| — | 8.00 | — | — | ||
| SITC of 6-32Amp MCB, SP, 10KA. | — | — | — | 1,886 | |
| — | 4.00 | — | — | ||
| Supply & erection of 2 Way sheet metallic enclosure for MCB fitted with Din Rail. | — | — | — | 1,368.24 | |
| — | 3.00 | — | — | ||
| Supply of 9-watt LED Bulkhead fitting. | — | — | — | 2,827.44 | |
| — | 8.00 | — | — | ||
| Supply of 1200 mm sweep 5 star rated BLDC fan. | — | — | — | 19,651.2 | |
| — | 8.00 | — | — | ||
| Fixing and testing of AC ceiling fan. | — | — | — | 346.96 | |
| — | 2.00 | — | — | ||
| Supply of Exhaust fan 300mm sweep. | — | — | — | 3,299.72 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of Exhaust fan. | — | — | — | 452.18 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of outdoor type distribution feeder pillar box consisting of copper bus bar 400 Amp, I/C: 1X400A MCCB 4P,36kA, with multifunction energy meter O/G:2x100Amp 4P MCCB 25KA, 2x 200Amp 4P MCCB 25KA & 2X63A MCCB FP,18kA. | — | — | — | 2,47,800 | |
| — | 1.00 | — | — | ||
| SITC of wall mounted panel Board I/C: 1x63A MCCB ,4P,18kA with multifunction energy meter, copper bus bar, O/G:3x32A 4P MCB 10KA Curve C & 3x32A DP MCB 10KA Curve C. | — | — | — | 34,220 | |
| — | 800.00 | — | — | ||
| Supplying and laying of 160 mm dia (OD-160 mm & ID-135 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. | — | — | — | 2,70,008 | |
| — | 100.00 | — | — | ||
| Laying of HT/LT single cable across the road/Track as per Railway appd drawing. | — | — | — | 44,873 | |
| — | 150.00 | — | — | ||
| Laying of cable on hard surface on platform/any cement concrete. | — | — | — | 51,055.5 | |
| — | 900.00 | — | — | ||
| Laying of cable in air/on wall/pole / through GI Pipe/culvert/cable trench/HDPE pipe etc. | — | — | — | 24,165 | |
| — | 24.00 | — | — | ||
| Supply & fixing of 100 mm inner dia (medium grade) GI pipe. | — | — | — | 25,462.8 | |
| — | 10.00 | — | — | ||
| Provision of G.I pipe earthing as per CEE approved drawing | — | — | — | 32,277.6 | |
| — | 50.00 | — | — | ||
| Supply & fixing of GI Flat | — | — | — | 3,836.5 | |
| — | 75.00 | — | — | ||
| Fabrication, Supply, Installation, testing & commissioning of APFC panel. | — | — | — | 60,204 | |
| — | 4.00 | — | — | ||
| Supply of 150-Watt LED Flood light | — | — | — | 10,909.52 | |
| — | 4.00 | — | — | ||
| Erection, testing & commissioning of LED outdoor fitting on SST/GI pole | — | — | — | 1,095.88 | |
| — | 40.00 | — | — | ||
| Supply of outdoor type LED light fitting 22W,48V of standard size along with LED light confirming with IP 65 & IK 10 water & dust proof for catwalk light (Model IR GOLDB1 of Goldwyn make or similar | — | — | — | 3,52,733.2 | |
| — | 1.00 | — | — | ||
| Supply of rain proof outdoor type Step down transformer of capacity 2 kVA,230V/ 48V, 50Hz, AC with MCB(DP) of 16A,230V on incoming side and 40A DP MCB on outgoing side. | — | — | — | 9,620.15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRGCC2022WorkscompressedLatest.pdf
ATTACHMENT
T-300-W-TenderBooklet.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .