Repair and renovation and upgradation of refurbishing physical health infrastructure and strengthening basic patient amenities at Bisoi PHC New under Bisoi block for the year 2025-26 (2nd phase

12mm thick cement plaster (1:6) to even surface of brick work.

16mm thick cement plaster (1:6) to uneven surface of brick work.

6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment

Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2" - 0" with 6mm thick plain A.C.Sheet of 125mm thick. etc. complete.

Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2" - 0" with India Gypsum board of 125mm thick. etc. complete.

Providing for Supplying,fitting & fixing of high Abrasion resistant Industrial Mat vitrified tile having size 1200mm x 600mm of approved make & shade manufactured by reputed manufacturer like Johnson S & P Ivory mat (General) and S & P Pastel brown (contrast)/Somany Neo Grandstone Crema mat/ RAK Coarstone Crema Mat / Kajaria Delphi Crema mat. on 25mm thick bed of cement mortar (1:1) filling joints with epoxy grout of approved quality to match the shade of the tiles including rubbing and polishing including cost of tile and all materials, labours, T&P etc. required for the work complete in all respect in all respect as per directed by Engineer-in-Charge.

Fixing vertified tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Fixing vertified tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Providing for Supplying,fitting & Fixing of 600mm x 600 mm polished Glazed vitrified tile of approved make & shade manufactured by reputed manufacturer like Somany Glacier White/ Johnson Super White/RAK Jazz White/Kajaria Pulido balnco wall tiles in dados, skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of all materials,labours,T&P etc. required for the work complete in all respect as per directed by Engineer-in-Charge.

Fixing glazed Ceramic tiles in floors,treads (400mm x 400mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Fixing glazzed wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Fixing Vetrified industrials floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size (300mm x 300mm) in floor and in rises of steps on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-30 grade made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete

Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)

Providing and fixing Granite tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Supplying and fixing MS doors and windows including cost conveyance taxes etc. complete.

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Providing & fixing 30mm thick Flush door shutters conforming to IS 2002 (Part I) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos stainless steel butt hinges (100mm x 60mmX 2.5mm) 40mm stainless steel screws . Cyllindrical lock ( Godrej-9843) tower bolt SS 10x300 stainless steel ( Bathroom) ( Godredge 3264) PVC door Buffer with SS screw ,teak wood lipping around the edges and paste with 1.5mm thick laminate on both side of the flush door ,etc.including the cost of all materials hardware fittings cost of all labour ,conveyance ,loading , unloading ,T & P etc, complete as per the EIC.Providing supplying, fitting fixing of UPVC openable doors including all fitting cost. (SR page- 234, sl no-9)

Providing fitting, fixing of Al. Door with OEL anodized Al. door section 9202 as vertical member, 9201 as top member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1885 including all cost of labour, T&P hire charges of drilling machine, labour charges etc.complete

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Ref.-DSR-Page-549, Item-9.147D.3)

Providing and fixing of fixed ventilators of approved value to be fabricated from rolled formed made of Pre-plasticized steel etc.complete

Providing fitting and fixing up partition walling aluminum anodized section NO. 9210 and 9207 as single groove and double groove resepctively as horizontal and vertical member and section 4660 as Tapered clup and jointing angle No. 1855 etc as per direction of Engineer in charge. including cost of laminated board of standard type I.S.I.

Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel etc. complete. (S/R page 249, item No. 14)

Supplying fitting fixing of 2'-0" wide Almirah made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm including all fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge

Supplying,fitting and fixing of office Table,camputer Table made out by of 19mm B.W.R ply wood and 2mm thick centuri sunmica of approved make on side,middle,Top and front side wall with foot rest and computer key board draw including cost, conveyance taxes of all fitting and materials cost of all labour T&P etc

Providing for Supplying, fitting and fixing of Wall Panelling made out by of 25mm B.W.R ply woodwith decorative laminate (Sunmica) one side including, jointing and finishing to a flush finish bonded with adhesives,anti-termite(Terminator) etc.

Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete.

Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as window frame Section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc.

20mm thick grading Plaster (1:4) with water proofing cement compound etc complete.

2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard granite chips including watering, curing etc.complete

4cm thick grading concrete (1:2:4) on roof slab using 12mm & downgraded size hard granite chips for old work

Providing Plastic Emulsion two coatsover a coat of primer & over a coat of putty wall surface to make an even shade including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer-in-charge.

Wall painting 2 coat with Weather coat of approved shade to give an even shade including cost of paint including cost of primer

Painting two coats to doors and windows with approved paint over a coat of primer including a cost of primer and paint etc. complete.

Multi colour Branding as per norm & specification of HWC with approved quality weather paint including cost of materials, labour charges, T & P, etc. in complete

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Providing and fixing 65mmx125mm factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, srew withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strenth of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (A) Column Base

(B) Grade Beam

(C ) Column

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Providing supplying fitting and fixing of Blue scope colour G.I. Sheet including etc.complete

Iron work wrough and put up in trusses and record racks , cow catcher (Labour & Material only)

Painting two coats to doors and windows with approved paint over a coat of primer including a cost of primer and paint etc. complete.

Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-30 grade made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Providing and applying of Post construction Anti-termite treatment by drilling 12mm dia. holes at distance of 30cm @ junction of wall and floor about 300mm aprt deep enogh to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5 ltr water) pumped these holes to soak the soil @ 1 ltr soulation of each hole as per manufactures specification and the holes should be pluged with filling materials including cost of all material, labour conveyance and hiring charges of machinaries all taxes as per direction of EIC.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (A) Column Base

(B) Grade Beam

(C ) Column

(D) Lintel

(E) Chajja (65mm thick)

(F ) Beam

(G ) Roof Slab

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Super structure .

Brickwork with Fly Ash bricks in cement mortar (1:4) in Super structure

12mm thick cement plaster (1:6) to even surface of brick work.

16mm thick cement plaster (1:6) to uneven surface of brick work.

6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment

Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)

Fixing glazzed wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Providing and fixing Granite tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Supplying and fixing MS doors and windows including cost conveyance taxes etc. complete.

Providing and fixing 65mmx125mm factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, srew withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strenth of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S

Providing & fixing 30mm thick Flush door shutters conforming to IS 2002 (Part I) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos stainless steel butt hinges (100mm x 60mmX 2.5mm) 40mm stainless steel screws . Cyllindrical lock ( Godrej-9843) tower bolt SS 10x300 stainless steel ( Bathroom) ( Godredge 3264) PVC door Buffer with SS screw ,teak wood lipping around the edges and paste with 1.5mm thick laminate on both side of the flush door ,etc.including the cost of all materials hardware fittings cost of all labour ,conveyance ,loading , unloading ,T & P etc, complete as per the EIC.Providing supplying, fitting fixing of UPVC openable doors including all fitting cost. (SR page- 234, sl no-9)

Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel etc. complete. (S/R page 249, item No.14)

Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete.

Providing Plastic Emulsion two coatsover a coat of primer & over a coat of putty wall surface to make an even shade including cost, conveyance, royalties, taxes of all materials, labour, T&P etc. Complete as per direction of Engineer-in-charge.

Wall painting 2 coat with Weather coat of approved shade to give an even shade including cost of paint including cost of primer

Painting two coats to doors and windows with approved paint over a coat of primer including a cost of primer and paint etc. complete.

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (A) Column Base

(B) Grade Beam(Excluding Column)

(C ) Column up to G.B

(D) Lintel

(E) Chajja (65mm thick)

(F ) Beam

(G ) Roof Slab

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Super structure .

12mm thick cement plaster (1:6) to even surface of brick work.

16mm thick cement plaster (1:6) to uneven surface of brick work.

6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment

Fixing vertified tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Fixing vertified tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Providing and fixing Granite tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Supplying and fixing MS doors and windows including cost conveyance taxes etc. complete.

Supplying, fitting fixing of two track UPVC Sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures. (SR page- 235, sl no-12)

Wall painting 2 coat with Weather coat of approved shade to give an even shade including cost of paint including cost of primer

Painting two coats to doors and windows with approved paint over a coat of primer including a cost of primer and paint etc. complete.

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

25mm damp proof course with cc (1:2:4) using 12mm size hard granite chips

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (A) Column Base

(B) Grade Beam(Excluding Column)

(C ) Column

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Super structure .

12mm thick cement plaster (1:6) to even surface of brick work.

Wall painting 2 coat with Weather coat of approved shade to give an even shade including cost of paint including cost of primer

Earth work for embankment in hard soil.( with mechanical means)

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (A) Column Base

(B) Grade Beam

(C ) Column

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Providing supplying fitting and fixing of Blue scope colour G.I. Sheet including etc.complete

Iron work wrough and put up in trusses and record racks , cow catcher (Labour & Material only)

Painting two coats to doors and windows with approved paint over a coat of primer including a cost of primer and paint etc. complete.

Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-30 grade made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

Cement Concrete (1:2:4) with 12mm size hard granite chips etc complete.

RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying (a ) Drain Slab

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor

Earth work for embankment in hard soil.( with mechanical means)

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-30 grade made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

25mm damp proof course with cc (1:2:4) using 12mm size hard granite chips

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Super structure .

12mm thick cement plaster (1:6) to even surface of brick work.

Wall painting 2 coat with Weather coat of approved shade to give an even shade including cost of paint including cost of primer

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-30 grade made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

25mm damp proof course with cc (1:2:4) using 12mm size hard granite chips

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Super structure .

16mm thick cement plaster (1:6) to uneven surface of brick work.

Fixing Vetrified industrials floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size (300mm x 300mm) in floor and in rises of steps on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Providing and fixing Granite tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

Dismentling and removing Brick or stone massonary up tp 3.0M. height and removing the debries away from site.

Dismentling and removing wrought and roof frame and removing the debries away from site.

Dismentling and removing A.C. sheet roofing and removing the debries away from site.

Dismantling and removing old tile flooring including removing the base coarse and stacking the usful materials for reuse etc.coomplete (A/R Page-223 , item No.28)

Dismantling and removing doors, windows & ventilators including removal of frame,hinges,fastenings and stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50 m lead etc complete

Removing old lime or cement plaster from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling and removing old tiled flooring including removing the old base and stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C

Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor

Providing for Supplying, fitting & Fixing of 600 mm x 600 mm polished Glazed vitrified tile of approved make & shade manufactured by reputed manufacturer like Somany Glacier White/ Johnson Super White/RAK Jazz White/ Kajaria Pulido balnco wall tiles in dados, skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including including cost of all materials, labours, T &P etc. required for the work complete in all respect as per directed by Engineer-in-Charge.

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/ Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C

Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe

110mm dia PVC'P' trap

110mm dia.PVC S/J/D

110mm dia.PVC H.R.Bend

110mm dia.PVC Door Bend

110mm dia PVC Plain Bend

110mm dia PVC offset

110mm dia PVC Cowl

75mm dia PVC pipe

75mm dia.PVC Door Bend

75mm dia PVC Plain Bend

75mm dia PVC Plain Tee

125mm dia CP greatings

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H. specification and direction of E.I.C. (a) 250mm to 375mm thick wall

Supplying all materials,labour,T&P for fixings water closet, squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 580mm Orissa Pan(White)

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC low level flushing cistern with a pair of C.I/MS brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle,unions and couplings for connection with inlet, outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 10 lit PVC L/L Cistern

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. Vitrous China-Flat back Standing urinal (Hindware/Parryware/Cera/Equivalent)

Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (450x355x100) mm with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing wash basin of ISI mark of with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C . (Hindware/Parryware/Cera/Equivalent) (a) 550mmx400mm size WHB

Pedestrial for WHB

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 600x450x250 mm stainless steel kitchen sink (Good Quality)

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type)

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 20mm dia PVC (ASTM) Pipe (Internal)

25mm dia (ASTM )PVC Pipe

32mm dia (ASTM )PVC Pipe

15mm dia PVC inlet Connection Pipe

32mm dia PVC Waste Pipe

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. a)upto 300mm wide

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber). 15mm dia C.P Bib Cock(L.B)

15mm dia C.P Bib cock(S.B)

15mm dia C.P Twin Bib cock

15mm dia C.P Health Fuccet

15mm dia C.P Pillar cock

15mm dia Angle Stop Cock

15mm dia CP Wall Mixture (2-in-1)

15mm dia Concealed Stop Cock

15mm dia CP Flange

15mm dia CP Extension Piece

25mm dia PVC Ball valve

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Glass self

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a) 20mmx450mm long CP towel rail

CP towel ring

Supplying all materials,labour,T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C. (a) 15mmx100mmlong

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 2000 lits capacity on the roof of ground floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 2000 lits capacity on the roof of ground floor Rain water Harvesting

Supplying all materials, labour, T&P and constructing Rain water Harvesting Pit of the following size with precast R.C.C rings, with 1st class KB brick work in CM (1:4) from bottom to top, 12mm thick Cement Plaster (1:4) with punning inside wall and Cement flush pointing at the outside of the wall over masonry brick work, packing Sand at Bottom and gravel at top in the rear of well steining for filteration of rain water, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (A) Gully Trap Chamber (0.25 x 0.25 inside Size)

Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe 110mm dia PVC Plain Bend

Liquid Waste Management

Supplying all materials labour T&P and providing, fitting and water storage tanks for Liquid waste treatment including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing to the required position, including cost of tank conveyance and taxes of all materials to work site involves managing and treating liquid waste generated from various medical procedures, patient care and laboratory testing to prevent contamination and to esure safe disposal fixing etc all complete as per direction of Engineer in Charge. Hot and Cold Drinking water

Supplying all materials labour T&P and providing, fitting and fixing Aquaguard Thermapure 120 PSS RO ACH, Approximate external dimention (WxDxH) 750x690x1465, Operating power supply -230V AC(5Hz) power rating (Max) Total-1580(+/-)10%, heating coil-1000W, water storage tank capacity Total-120liters, Cold-80L, Hot-20L, Ambient-20L, Cooling capacity at comfort label 60LPH, water outlet temperature at rated condition Cold-15 Deg C +/-1, Hot-50 Deg C+/-1, Regrigerant HFC R 134-a, Thermal insulation for storage tank-PUF, No of faucets-03 (1 hot, 1 Cold, 1 Ambient) , No of stages for filter cum purifier-07, RO membrance rating -4 No x80 GPD or equivalent permeate (Purified water) production capacity -50LPH, % of purified water recovery -40%, %Rejection of DS-90% Approx storage tank material -SS 304, Outer body material-front SS 304, Type of product product construction-concealed, Type of Installation-Indoor, Weight-92KG etc all complete as per direction of Engineer in Charge.

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) 1st depth-

2nd depth-

Supplying all materials,labour,T&P and filling in F&p with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C

Supplying all materials,labour, T&P and providing PCC(1:1.5:3) with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8%in cm(1:4) including watering, curring, conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of E.I.C. (a) In Foundation and Plinth in C:M (1:4)

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C

Supplying all materials, labour, T&P and providing MS reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing RCC (1:1:5:3) with 12mm size HG chips for RCC works including hoisting, laying, watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C 1x 2.50 m x 1.40 m x 0.10 m=0.35 cum

Supplying all materials,labour,T&P and providing 12mm thick CP(1:3)on brick work with punning for skirting including watering,curing,conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of E.I.C

Supplying all materials,labour,T&P and providing cement flush pointing (1:3)to brick masonry including watering, curing, conveyance of all materialsto worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C.

Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of MH/ Septic tank dullyembedded as per direction of E.I.C.

Supplying all labour T&P and providing 50mm thick pre cast RCC baffle walls in cc(1:1.5:3)with 12mm size bhg chips fitted and fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast MH cover in cc (1:1.5 :3) using 12mm size hbg chips, placing the cover on the MH/S.Tank & finishing smooth etc all complete including watering, curing, conveyance of all materials to worksite, payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing, fitting and fixing of 110mm dia PVC Tee in wall of S.Tank including filling the recess with cc(1:1.5:3)with 12mm size BHG chips including watering,curing, conveyance of all materials to worksite, payment of royalty,taxes etc all complete as per the direction of E.I.C.

Filling in F&P with excavated materials,including watering and ramming as per the direction of the E.I.C.

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 1.20m dia x 1.80m deep RCC Ring Soak Pit

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3: 6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6), moulding & shapping the channel inside&benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick cp(1:3) with punning to inside, cement flush pointing(1:3)to outside,RCC coverslab in cc(1;1.5:3) using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C. Size (760mmx760mmx460mm)

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches(to level or slope) and jointing with supply of approved rubber lubricant by nonheat application method using 40mm bhg metals on bed of the trenchand hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc.and testing all complete as per approved drawing,design,specification and direction of E.I.C. (A)110mm dia PVC pipe with allround encasing

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ KEI / Havels /Polycab ) Group A

Group B

Group C

Recessed wiring to Fan Point inGroup B

Recessed wiring to Fan Point inGroup C

Recessed wiring to Call Bell Point inGroup C

Recessed wiring to Exhaust Fan Point inGroup C

S/F of Angle holder replacing Ceilling Rose

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 1 nos 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)

S/F of C series TPN MCB of 63 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box(2.6.4)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 6 way Single door (2.3.1(a) + 2.3.1(b))

S/F of MCB 8 way Single door (2.3.2)

S/F of MCB 12 way Double door (2.3.7)

S/F of 4 way (4+12) TPN MCB DB double door (2.5.5)

S/F of Type 1+2 TPN SPD (3-phase) with I max 50 KA with remote signalling(Make-Havells,L&T)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

Supply, Installation, Testing & Commissioning of exhaust fan upto 225 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL

Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-HS/Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS )

S/F step type modular fan regulator

S/F of 400mm A.C. wal fan with 5A socket & switch on a 2 nos of 2 mod MS box with cover (Make:Usha-Max air ultra/Polycab-Aery HS/Crompton-wmhiflo wave /Havels-Accelero HS/Anchor-Altrix HS/Orient- Wall 43/ Great white- WYNO Pro HS)

Supply & Fixing of 45-48 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

S/F of 15w Watt LED Bulb

S/F of 1.5T 3Star split type AC Machine, Make-Carrier/Daikin/Hitachi

S/F of 4KVA Automatic Voltage Stabilizer(90-300V), Make-Microtek/V-Guard

S/F of 2000 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtek/ Luminous

S/F of 18W LeD Squre (12"×12") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic)

Supply & Fixing of 25 Watt Garden light fitting including all accessories and connections (Make:Crompton/Polycab/Havells)

S/F of 4 sqmm twin core unbonded aluminium service connection wire with no.8 G.I. Guard wire to support the aluminium wire

Provision of Armoured cable size 2x6sqmm (15)

Provision of Armoured cable size 4x16sqmm (39)

Laying of MV cable upto 25sqmm in ground (5.1.1)

Laying of MV cable upto 25sqmm on surface (5.5.1)

S/F of 40mm dia HDPE Pipe for cable laying and Protection

Supply & fixing of 63A TPN Panel board 1. 63A MCCB (Make- Legrand/Seimens/L&T/C&S/) 2. 63A kitkat & bus bar 3. 32A DP MCB- 4 nos 4. 63 A 4P load changeover switch (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad)

Supply & Instalation of 6 meter HDG octagonal Pole (Top 70 mm & Bottom 130mm of 3 mm thick) with double arm detachable ring type Bracket suitable to hold the light fitting on 1500mm long beacket . The Base Plate (220X220X12mm) with 4 nos of plinth Foundation bolts(20 mm dia 600mm Length) to be mounted on concrete Foundation (1.5'X1.5'X4' high) usng HYSD steel reinforced for errection of Pole firmly as per direction of Engineer in Charge.Make-(Bajaj,Utkarsh,RR)

Supply and Installation of 4 feet GI-PU Painted Post top landscape pole with foundation accessories and inbuild JB Material with concrete foundation as per direction of Engineer-in -Charge as per drawing

SITC of 8 Channel SMART NVR (Or Above) support 8MP(4K),S+265/H.265,,Support SATA HDDs (upto10TB Each),Support Multi-brand network cameras, Bandwidth Incoming 320Mbps,Outgoing-180Mbps, HDMI & VGA Simultaneous video support,Al by Camera: Face detection and recognition, perimeter protection; SMD Plus; ANPR; people counting; stereo analysis; heat map,detecon alarm is supported, Support cloud upgrade. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/ CP Plus

Supply & fixing of 4MP Bullet IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict . Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/ CP Plus

Supply & fixing of 4MP Dome IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/ CP Plus

Supply of 10TB HK-HDD10T,Audio/Video-24/7 Continuous Operation. Make: Toshiba/Segate

SITC of 8-Port Gigabit Switch 10/100/1000T ,8EP+2G+1SFP Al PoE Switch,Networking standard: IEEE802.3af/at/bt PoE Watchdog Al Function: Detection front-end PoE cameras and PD, Automatic detection, Automatic restart,Upload port automatic flip (Auto MDI/MDIX),FE ports can support 250 meters long distance transmission automatically,6KV lightning protection,8KV surge protection, anti-reverse connection, over-current protection, over-voltage protection, over-temperature protection, Short circuit protection,The port Max power Output is 60 watts, it is convenient for high-power device,Power Budget 300W,Energy-Efficient Ethernet, Operating Environment Temperature: 0 ~ 50°C Storage Environment Temperature: -10 ~ 70°C Operating Humidity Relative Humidity: 5 ~ 95% (non-condensing) Storage Humidity Relative Humidity: 5~95% (non-condensing)

Supply of 4U Wall Mount Rack loaded with one no 3Skt 6/16A power distribution unit, 1no cable manager, 1no 90 CFM FAN, one pkt H/W screw.Basic frame: CRCA (MS SHEET) 0.6mm thick,Construction-Welded,Top & Bottom cover: cable entry cut-outs,Front Door: Lockable-Toughened glass with Lock & Key,Toughened Glass used as an excellent thief deterrent,Standard finish: Powder coated,Dual-Tone Gray Color - fits in well with all indoor /outdoor aesthetics,Differentiator Quality,Load Bearing Capacity - 15kg,Industry leading design. Including all other materials & as directed by site-incharge Make: D-link/Dgisol

Supply CAT6 Armoured Cable,Generally confirming to EIA/TIA 568-C.2 and IEC/ISO11801,Excellent Margin with suppression of Cross Talk (NEXT),4 Pair Separator Design,23 AWG cable,For Outdoor installation. Including all other materials & as directed by site-incharge Make: D-link/Finolex

Supply and laying of 20mm pvc conduit in complete as per the direction of engineer incharge . Make: AKG

Supply of HDMI cable Extender.

Supply and fixing of 32" IPS HD Display with 440 NITS, 1200:1 Contrast Ratio, android professional display in complete as per the direction of engineer incharge.with 3yeras warranty.Supply,installation,testing & commissioning of Tv Wall Mount Bracket. Make: Sony ,Samsung,LG

Supply of Wireless mouse

Supply,installation of Rj 45 Connectors Make: Tyco-AMP/ Schneider/ Digisol .

Supply and installation of professional gooseneck microphone for podium/table-top use.Microphone Element: Condenser typePolar Pattern: Uni-directional / CardioidFrequency Response: 50-16,000 HzSensitivity: 5.5mV/PaImpedance: 200 \(\Omega \)Overall Length: 585mm (23") or longerFeatures: Sleek, high-quality audio reproduction, high front-to-back rejection for feedback reduction.GOSENECK MICKROPHONE MAKE-Ahuja,mx,studio master

Supply and installation of a sturdy, heavy-duty gooseneck microphone base.Construction: Die-cast aluminium with anti-skid feet Connectors: Female XLR for microphone, Male XLR outputPower: Requires 9V-52V DC phantom power or compatible power supply Features: On/Off switch, LED indicator for status.MAKE-Ahuja,mx,studio master

Supply and installation of connection cable. 3-core shielded low-noise microphone cable Length: 10 meters or as specified. Connectors: XLR male to 6.3mm (1/4) phone plug. MAKE-Ahuja,mx,studio master PVC Duct Pipe Size: 25mm or specified size Fittings: Ebco Circular Fittings or make AKG, POLYCAB,PRICESSION -ONLY FRLS WITH HMS GRADE PIPE

200 WATT AMPLIFIER Public address (PA) amplifier, 200 WattsType: Multi-input mixer amplifier for public address (PA) system applications. Rated output power: 200 W minimum, at 100V and 4 16 output. Power source: 220 240 V AC, 50/60 Hz mains supply, with an option for 24 V DC battery operation for emergency backup. Amplifier Class: High efficiency Class-D design is preferred. Frequency response: 50 Hz to 15,000 Hz (3 dB). Total Harmonic Distortion (THD): Less than 2 at rated output power. Signal-to-Noise (S/N) ratio: 60 dB or more (for microphone inputs); 70 dB or more (for auxiliary inputs). Output regulation: Less than 2 dB (no load to full load at 1 kHz). Input channels: Minimum of 4 microphone inputs (with phantom power capability on at least one channel) and 2 auxiliary inputs. MAKEAhuja,mx,studio master

WALL SPEAKER2 way flush mount speaker suitable for indoor PA systems. Rated Power: 20W RMSPower Taps (on 100V line): 20W, 10W,5W Frequency Response: 90 ,18,000HzSPL (1W/1m): 91dB at 1kHz Speaker Components: 150mm (5) woofer, 25mm (1) tweeter Dimensions: 200 × H85 mmConstruction: Moulded plastic frame withmetal mesh grill Features: Wide frequency response, adjustable tweeter, and built in 100V line matching transformer. MAKE Ahuja,mx,studio master

1.5 Twin, multi-strand speaker cable for connecting low-impedance speakers to amplifiers.High-purity, 99.99% Oxygen-Free Copper (OFC) to ensure high conductivity, low distortion, and corrosion resistance..1.5 sq.mm (approx. 16 AWG) or higher, as required by the system design andycabable run length.MAKE - finolex ,polycab,mx PVC Duct PipeSize: 25mm or specified sizeFittings: Ebco Circular Fittings or make AKG, POLYCAB,PRICESSION -ONLY FRLS WITH HMS GRADE PIPE

INSTALLATION OF CH&DE UNIT AND WIRING OF SPEKER,SOLDERING AND JOINTING

SITC of 6 Kg Fire Extinguisher ABC Compound Make (AGNI ,Fire Shield ,GSK,Kanex)

Please Enable Macros to View BoQ information