CANOPY ROOFING CEILING WORKS_HISAR RO

FALSE CEILING — roviding & fixing false ceiling system of Trac 150 F exterior grade or approved equivalent of 0.5mm thick galvanised steel with stov enameled coil coated finish inter locking ceiling panels, carriers, suspension system and edge closure as per the following specific ion. Supplying and installation of exterior grade 150 F ceiling system comprising of 150 mm x 17 mm deep panels roll formed out of 0 mm galvanised steel with stove enameled coil coated finish. The panels shall be pre-treated and coil coated on one side in manufact ers standard colour shades as approved by the Architect/ Engineer in charge. The rear side of the panel shall be given a coat of pri r and a wash coat while the finished side shall be given a coat of primer and finish colour coat in polyster paint for a min. dry fi thickness of 20 microns, fixed on to the roll formed carriers 34.5 mm x 488 mm deep out of 6 mm thick Galvanised steed with prongs hold panels in the module of 150 mm at maximum 1.2 mts. C/C. The carriers to be suspended from roof truss by rigid suspension angle as per manufacturer's recommendation. Panels shall be supplied in custom length upto maximum of 5 mts. Job also includes providing c ling flashing using factory formed 0.5 mm thick Polyster coated galvanised steel material. Rate shall be including providing flashin to cover gap if any between illuminated banding and false ceiling.

MS FASCIA — pplying and fixing 20 SWG GI sheet facia including painting with one coat of zinc chromate primer and two coats of 1 st quality synt tic enamel paint on front side . Necessary facia framework for fastening the sheet to the canopy securely shall be paid separately.

AL GUTTER — oviding and fixing 2 mm thick Aluminum Sheet Gutters of required shape in slope with 40 mm x 3 mm MS. Brackets at 1000 mm maximum sp ing and 8 mm dia G.I. J or L hooks, boltsand nuts, GI Limpet and bitumen washers, providing nut bolt joint , sealing the joints with ilicon sealant testing the gutter for leakage by filling water etc. Complete.(Refer attached Drawing .For allowable tolerance refer IS codes

6" PVC PIPES OF 6 KG/SQCM — oviding and fixing 6" dia PVC pipes of 6 Kg/sqcm of approved Make as per IS 4985 for rain water pipes including all fittings like ba s , shoes etc., MS fabricated bracket as per requiment etc. All complete as directed by the EIC.

LED FIXTURE 80 W — 0 W LED Fitting as mentioned in IS standards IS 16101 to 16107:Supply and fixing of 80 W LED housed by Single piece Pressure Die Cas Aluminum body, recess mountable fitting with guaranteed burning hours of 50000 .Make Philips/Havells/Bajaj/Wipro/Osram/Crompton/GE/B er Innovations. IP Protection of minimum IP 65 andabove, suitable for canopy lighting at retail outlets (Petrol station) .The bidde should submit copy of certified photometric report as per IESNA LM-79(Approved method for the Electrical and Photometric Measurement of Solid-State Lighting Products) from a UL/ ERTL /ERDA or any NABL accredited laboratory to validate the photometric claims as & wh asked by HPC. A minimum 3 years warranty from manufacturing defects for the luminaire by manufacturer.i) With high lumen efficacy L s from CREE, Seoul Semi- Conductor, Lumiled Philips, Osram, Nichia (Japan), Tridonic (Austria), GE and Bridgelux . Efficiency of mor than 90 lumens per watt . LEDs used in the fixture should be from the same bin and certified as per LM-80 (IESNA: Approved Method fo Measuring Lumen Maintenance of LED Light Sources and LED lumen depreciation time to L70 based on LM-80 data). by any UL/ ERTL /ERDA any NABL accredited laboratory to validate the photometric claims as & when asked by HPC.ii) Bottom open able for easy maintenance. i)High Quality Polycarbonate Opal Diffuser for Optimum uniformity and Glare free light output.iv) General electrical protection agai t High Voltage and Surges up to3 KVv) Power factor > 0.95vi) Range allowed for total system wattage 80 W with +2W or -2W vii) Driver perating Voltage Range: 140 V- 270 V viii) Operating Temperature 0 to +45 Deg Centigradeviii) CRI more than 70 ix) Colour temperatu 5650K±500K (to be mentioned in LM 79 certificate) x)Wide beam angle for spread of light 120 degrees or more xi)Luminaire Performance omplies to IS10322 (Part 5/Sec 3) & IEC 60598-1,IEC 60529, ROHS"

4CX2.5SQMM COPPER CABLE — pply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 4CX2.5SQMM OPPER CABLE

4CX2.5 SQMM END — D TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 4CX2.5 SQMM END TERMINATION

ROOFING TRACDEK HI RIB 100 7018-HISSAR RETAIL RO — oviding and installing roofing Ribbed roofing system manufactured with high strength steel grade of G550( 550MPa) of ZINCALUME steel r approved equivalent bare Galvalume high tensile cold rolled steel as per ASTM 117 A792M /AS 1397 Coating class AZM 150 ( minimum 1 gm/sqm Zinc-Aluminium alloy coating mass total of both sides),of Yield strength 550 Mpa Thickness of bare metal (BCT): 0.40mm ,Tota coated thickness(TCT) : 0.45 mm .Approximate mass of roofing sheet shall be 4.17 Kg/sqm. Panels shall be of Min. 900 mm wide and Min corrugation depth of 38 mm with varying lengths as per Site requirements Rate shall be including laying of sheets with approved fast ers and also all weather sealant tape as per Mfr's recommendationsand also providing ribbed galvalueme ridge pieces of the same clas as of the matching corrugation profile of the roofing system as recommended by the Mfr.and , horizontal/vertical flashing near illum ated banding.

4"PVC PIPES OF 6 KG/SQCM — oviding and fixing 4" dia PVC pipes of 6 Kg/sqcm of approved Make as per IS 4985 for rain water pipes including all fittings like ba s , shoes etc., MS fabricated bracket as per requiment etc. All complete as directed by the EIC.

INSTALLING SUPPLIED — O INSTALL SUPPLIED LED FIXTURE OF CANOPY OR YARD LIGHT AT RETAIL OUTLETS OR OTHER PREMISES AS DECIDED BY HPCL. WORK INCLUDES PICKING P OF FIXTURES, ACCESSORIES, CUT OUTS, CONTROLLERS ETC. FROM REGIONAL OFFICE, TRANSPORTING, STOCKING AT RETAIL OUTLETS. COST TO INCLU INSTALLATION OF FIXTURE AS PER MANUFACTURER RECOMMENDATION, WITH CHAIN OR GI WIRE HOLDING STRAPS, ACCESSORIES, MATERIAL, LABOR ETC. VENDOR TO FOLLOW INSTRUCTIONS OF EIC FOR DECIDING THE LOCATION OF FIXTURE. CABLE, GLANDS WILL BE PAID EXTRA IF PROVIDED BY VENDOR.