REPAIR TO CERTAIN INTERNAL ROAD AND ROAD FURNITURE AT MD ACCN UNDER AGE B/R-II AT GE KAMPTEE

Amount

Material and labour for repair to potholes any depth, not exc 1 sqm each including sweeping, with mechanical equipment, and making the surface free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc.by using pressure air, cutting around edges to at least 25mm in depth making good by applying tack coat at 5 kg per 10sqm, putting in premix as specified for thin bituminous carpet (2cm thick), well rammed and sealed with 5.5% binder content (paving bitumen any penetration of grade VG 30) by weight of total mix, rolled and compacted (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm using paving bitumen complete all as specified and as directed.

Material and labour for for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 Sqm for receiving Bituminous Macadam using paving bitumen grade VG-10 and premix bituminous macadam laid/ rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving bitumen any penetration of grade VG-30) of 4% by weight of total mix complete all as specified and directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 Sqm for receiving Bituminous Macadam using paving bitumen grade VG-10 using mechanical sprayer and providing premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content (using paving bitumen of grade VG-30) by weight of total mix and 2% cement filler, rolled and compacted to required camber and gradient using power roller 8 to 10 tonne capacity complete all as specified and directed. Note for Ser No 2 and 3: The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Material and Labour for painting lines, dashes, arrows etc by applying 2.5mm thick thermoplastic road marking compound of white/yellow colour of approved make and shade for road marking not exc 10cm width on new/old surfaces of bituminous roads/ pavements or on cement concrete surfaces using HOT Processor Plant as as per manufacturer's specifications complete all as specified and directed.

Supply and fixing in repairs delineators ABS round body fitted with 2 Nos 50mm or 65mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 65mm duly powder coated, anti rust and anti theft steel net and providing cement concrete as in foundation filling complete all as specified and as directed. Make: ALCOlite /GREENLITE / 3M / DARKEYE.

Supply and fix in repairs solar road stud of size 125mm x 125mm x 20mm aluminium alloy & polycarbonate stud (red/yellow LEDs) 3+3 LEDs with shank in tough aluminium diecast body with MS zinc coated nails of size 12mm dia and 120mm long as per MORTH's specifications complete all as specified and directed. Make: ALCOlite /GREENLITE / 3M / DARKEYE.

Supply and fix in repairs ABS road colour cat eyes having dual direction (both sides) of size 100mm x 100mm x 18mm having body ABS filled with epoxy, quartz & sand with PMMA lens with load capacity greater than 50Kg with visibility 800m etc complete all as specified and directed. Make: ALCOlite /GREENLITE / 3M / DARKEYE.

Material and labour for approved Moorum/red bajri filling in floors or pavings, laid in layers not exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing 100mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-40 Grade with grey cement and pigment complete all as specified and directed.

Material and labour for 50mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

NOTE : SCHEDULE OF CREDIT (Amount on page No 33 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

Raut Construction (BID ID -3309875)

M/s SHREE SAIBABA CONSTRUCTION (BID ID -3311121)

Bidder Name

Raut Construction

LAL AND SONS

M/s SHREE SAIBABA CONSTRUCTION