Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.1 LAWARDED | AWARDED |
Tender Value
₹4.0 L
EMD Value
₹5,100
Closing Date
25 Jun 2025, 10:28 pmClosed
Public Works Department
Providing painting polishing, waterprofing, vitrified tiles and other allied works to Reception Room in LH-4 Bangalore ( Reserved For CAT II (A)).
PWD/2024-25/BD/WORK_INDENT21057/CALL-2
PWD/2024-25/BD/WORK_INDENT21057/CALL-2
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
₹500
₹5,100
18 Jun 2025
18 Jun 2025
26 Jun 2025
21 Jun 2025
Providing painting polishing, waterprofing, vitrified tiles and other allied works to Reception Room in LH-4 Bangalore
Treating Active leakage from Concrete walls - Providing and grouting with single component Polyurethane Foam injection grout at dripping leakage locations, grout mixed at ratio of 10:1 (10 part...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Crackfilling - Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1:1 and then preparing Cement Mortar of 1:3 admixed with SBR latex...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .