Construction of CC Road and Drain in Khanjar Galli and construction of CC Road in Kotwal Galli Tegginkar Galli Near Urdu School in Ward No.1 Belagavi. (Reserved for Schedule Caste (SC) Contractors Only)

Construction of CC road and Drain in Khanjar galli and construction of CC road in Kotwal galli Tegginkar galli near Urdu school in ward no 1 Belagavi

Dismantling of Cement Concrete Pavement - Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stoc...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 10 m3)

Cost of Haulage Excluding Loading and Unloading - Case-1 : Surfaced Road - Taking output 10 t load and lead 10 km = 100 t.km

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work s...

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

OTHER ITEMS - (CC Pavement, PMGSY Boards & Innovative Technology) - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base,...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work s...

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

Providing and constructing of Machinehole chambers conical in shape at

top with CC 1:3:6 foundation using 40mm and down size graded metal of

approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at

top with CC 1:3:6 foundation using 40mm and down size graded metal of

approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at

top with CC 1:3:6 foundation using 40mm and down size graded metal of

approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at

top with CC 1:3:6 foundation using 40mm and down size graded metal of

approved quality and with an offset of 0.15m alround the ch...

Providing and constructing of Machinehole chambers conical in shape at

top with CC 1:3:6 foundation using 40mm and down size graded metal of

approved quality and with an offset of 0.15m alround the ch...