SPL REPAIR OF BLDG NO P-213 AT JAK LI REGT CENTRE SRINAGAR UNDER GE 970 EWS

Amount

Demolition of cement concrete (un-reinforced) as in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantiling of floor, hearth or wall tiling including cement mortar bedding (not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Screed bed or bedding layer of mortar, 15mm thick in cement mortar 1:4 for laying for rough finish to receive tiles in top layer, complete all as specified and directed.

M&L coloured non skid ceramic tiles not less than 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:3 on fair faces of brick wall or concrete surfaces to receive tiles, complete all as specified and directed.

M&L for coloured glazed ceramic tiles (Size 350x250x7mm/ 450x350x7mm) as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms/WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slabs and tiles of any description or thickness in floors, aprons extra laid/ bedded in any mortar, complete all as specified and directed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 20mm thick CM 1:4 cement screed and jointed complete all as specified and directed

M&L for 50mm thick PCC 1:3:6, type C-1, (using 20 mm graded crushed stone aggregate) as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A", complete all as specified and directed.

M&L for sand filling 25 mm thick for sand cushioning for laying of interlocking paver blocks under floors/path including watering and consolidation as required complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in floors and subbase without using extra cement complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Preparing surfaces of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall be then cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level including ponding test and GI pipe spout to receive top flooring, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate) as in sunken floor complete all as specified and directed .

M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains complete all as specified and directed .

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

Demolition of cement concrete in reinforced (reinforced cut as required to faciliitate demolition) roofs, floors beams ,stair cases,landings,chajja and similar suspended work complete all as specified and directed .

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed .

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L For RCC Type B1,1:2:4 (using 20mm graded crushed stone aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, complete all as specified and directed.

M&L framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed .

Dismantling boarding, any description, fixed in any position with nails.

S&F 8mm thick Non asbestos fibre cement building boards fixed or laid /inserted to existing timber/GI /Aluminium frame/flat iron frame work with screws all as directed .

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed .

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 20 mm thick 1st class softwood eaves board with nails in any situation (except flooring and skirting) planed one side with butt joints complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

All as per item No 33 above but except bricks complete all as specified and directed

M & L brickwork with subclass b bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1.4) complete all as specified.

Taking down cement plaster any description on brick or stone masonry walls incl racking out joint , Hiking for key ,scrubbing down with water complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finishing the surface even and smooth (without using extra cement) in two layers with WPC complete all as specified. Note : WPC shall be measured & paid for separately

M & L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement morar 1:6 finishing the surface even and smooth (without using extra cement complete all as specified and as directed.

M&L for Rendering 5mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound compete all as specified.

M&L for preparation of new plaster surface of wall and applying 2 to 3mm thick layer of wall care putty , complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed .

M&L for preparation of new plastered surfaces of ceiling and applying three coats of oil bound distemper complete all as specified and directed.

M&L Preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) complete all as specified and directed.

M&L for applying one coat of wall putty of minimum 2 to 3mm thick over & above complete surface treated under item No. 45 complete all as specified and directed.

M&L for applying two coats of oil bound distemper over item No 46 complete all as specified and directed.

M&L for applying two coats of exterior emulsion over a coat of chalk whitening and finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over item No 46 above complete all as specified and directed.

M&L for applying two coats of oil bound distemper over item no 45 on ceiling complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm and n. exc .4 .00 Sqm each all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, in opening as per specification and drawing, complete all as specified and as per sample approved by GE.

S&F Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing, complete all as specified and as per sample approved by GE.

S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in filling in door frames complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as per sample approved by GE.

S&F 2nd class hard wood 35 mm thick factory made glazed and gauzed skelton shutters, (two panel) open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as per sample approved by GE.

M&L for Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for Preparing old wood and wood based materials of any description and girth, not otherwise described and treated with one coats of synthetic enamel etc, complete all as specified and directed .

S&F Box type steel window (Factory made) outer frame made out ERW tube 'P' section 65mmX45mmX25mm and shutters of ERW tube 'P' section 50mmX35mmX20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (internal side) with steel pintal hinges, steel handle 100mm long, mild steel tower bolt 02 Nos on each shutter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.36mm dia nominal dia of stainless steel wire cloth average width of aperture 1.4mm dia and 3mm thick sheet glass window and 3mm figured glass for ventilators with 8 mm MS Grill bars all as specified and as per sample approved by GE. Note: The quoted rate against the above item shall also include:- (i) For provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contract with bricks/concrete surface. (ii) 04 Nos MS steel Lugs of 20mmX5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs (iv) 0.36 mm dia SS wire mesh (v) 3 mm thick sheet glass- for window (vi) 3 mm thick figured glass- for ventilator (v) 8mm square MS grill bars

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for Preparation of old steel painted surfaces and applying one coats of synthetic enamel paint complete all as specified and directed .

S&F Butt hinges medium weight cold rolled stainless steel 75 mm size, complete all as specified and directed .

S&F extruded aluminium alloy D type handles,anodised of 75mm size ISI marked complete all as specified and directed.

S&F Aluminium handles, D type, anodized 150 mm long ISI Marked, complete all as specified and directed.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section ISI Marked, complete all as specified and directed

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long dia 16 mm complete.ISI Marked, complete all as specified and directed

S&F Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. ISI Marked,complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq.m in each pane, complete all as specified and directed.

S&F 0.36 mm dia nominal dia of stainless steel wire cloth average width of aperature 1.40 mm and fixed with SS wire staple etc,complete all as specified and directed .

S&F in repair 25 mm dia Stainless Steel curtain rods including fixing arrangements, complete all as specified and directed .

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 20 mm outer dia pipe of bore 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 25 mm outer dia pipe of bore 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or infloors etc., complete all as specified and directed .

M&L for lagging to 20 mm outer dia pipe of bore 3-layer PP-R polyprophylene random copolymer) pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01 mm aluminium foil complete all as specified and directed .

M&L for lagging to 25 mm outer dia pipe of bore 3-layer PP-R polypropylene random copolymer) pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01 mm aluminium foil complete all as specified and directed .

Dismantling existing water tank n exc 1000 ltr and removing from site including necessary connected accessories, complete all as specified and directed.

S&F Rotational moulded PVC water tanks of 1000 Ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position, complete all as specified and as per sample approved by GE.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight- 455 gms) complete all as specified and directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe including PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed.

S&F UPVC traps 'P' or 'S' of 110mm dia complete all as specified and directed

S&F in repair Vitreous China urinals, full stall bowl type (back or corner wall type),complete including providingand fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs withand including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repairs for Soap dish, vitreous China white, approximate size 160x160x90mm, complete all as specified and directed.

S&F in repairs 100 mm dia CP shower rose, with or without swivel joints any size including fixing to steel pipes or unions etc, complete all as specified and directed.

S&F in repairs 25 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F in repairs 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed, complete all as specified and directed.

S&F in repairs chromium plated fancy type wall mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fancy type high pressure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fancy type high pressure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions , but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repairs PTMT grating doom 125 mm dia with waste hole.(Min.weight 40gms), complete all as specified and directed .

S&F in repairs for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed .

S&F in repair Low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.

Taking up or down 100/ 75mm bore of CI/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100/75mm dia pipe, complete all as specified and directed.

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor, complete all as specified and directed.

Ditto- all as per item no.96 above but 75mm bore pipe, complete all as specified and directed.

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall, complete all as specified and directed.

Ditto- all as per item No 98 above but 75mm bore pipe, complete all as specified and directed.

S&F UPVC bends (any radius) of 110mm dia complete all as specified and directed

S&FUPVC bends (any radius) of 75mm dia complete all as specified and directed.

S&F 110 mm dia UPVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc, complete all as specified and directed.

All as per item No 102 above but 75 mm dia bore complete all as specified and directed.

S&F UPVC cowls of 75mm dia complete all as specified and directed.

S&F UPVC cowls of 110mm dia complete all as specified and directed.

S&F in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F in repairs for 75/100 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementt, complete all as specified and directed .

S&F in repairs Brass chromium plated tubular towel rail 20mm dia `D' type 60 cm long between flanges, complete all as specified and directed .

S&F in repair Sheet glass shelf assembly consisting of 6mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Supply, laying, commissioning & testing XLPE LT cable, 1100 volts grade, PVC insulated, heavy duty, armoured, multistranded aluminium conductor cable of size 25 Sqmm 3.5 Core, laid in trenches, fixing on wall/ poles, under road crossing etc, complete all as specified and directed. Note :- (i) Earth work, sand cushioning and brick covering shall be measured and paid separately under respective items of this BOQ. (ii) The cost of AIuminium thimbles/ lugs and cable gland etc is including in quoted rate and no extra payment will be made for it.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out in any type of soil for taking or laying of cables, pipes, erection of pole etc, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and laying dry river sand laid in trenches as cable cushioning and covering complete all as specified and directed. Note : Punned thickness only measured and paid.

M&L for brick well brunt locally available sub class 'B' laid over sand cushioning to cable in trenches keping width of brick parallel to the length of cable complete all as specified and directed.

Taking down/ taking out old unserviceable damaged GI/ PPR pipe of following sizes from excavated trenches including removing of fittings all as directed for necessary replacement/ relaying serviceable GI pipe of size 50mm dia, complete all as specified and directed.

Description all as per Srl item No. 116.00, but for 32/40mm dia pipe.

Description all as per Srl item No. 116.00, but for 25mm dia pipe.

Supply and laying of PPR pipes 3 layer SDR 7.4 of outer 25mm diameter, laying of PPR pipes 3 layer SDR 7.4 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR & brass threaded polypropylene random fittings laid in trenches including fittings and testing, complete all as specified and directed.

Description all as per Srl item No. 119.00, but for outer dia 32mm.

Description all as per Srl item No. 119.00, but for outer dia 50mm.

M&L for construction of Brick masonry valve chamber of size 600x600x600mm (Internal dimentions) with PCC 1:4:8 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in hard/dense soil, MS sheet cover 4mm thick and MS equal angle iron 50mmx50mmx6mm frame as per existing size with locking arrangement embedded in PCC suitable for 20/40/50mm gate valve and painting to MS cover with two caots of synthetic enamel paint over one coat of red oxide primer etc complete including dismantling old/ damaged valve pits.

Making connection of PPR distribution branch with PPR main of sizes 50mm to 75mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

Taking out unserviceable gate valves from water pipe line for necessary replacement all as directed for valve size 15mm to 32mm

Taking out unserviceable gate valves from water pipe line for necessary replacement all as directed for valve size 40mm to 80mm

Supply and fixing PPR gate valve (Brass insert) of size 25mm dia including connection and testing complete alll specified and directed.

Supply and fixing PPR gate valve (Brass insert) of size 50mm dia including connection and testing complete alll specified and directed.

S&F GI flat strip clamps of size 25mm x3mm duly bended as per the size of GI tubing and site condition, drilled complete alll specified and directed

Supply and fixing of heavy rust proof passivated bolts made of steel of size 8mm dia 75mm long including necessary drilling on wall for fixing of steel frame complete alll specified and directed.

M&L lagging on pipes used in external water supply or plumbing all round with, 40mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauze 20mm mesh and finally covering with plaster of paris including taking down old, complete all as specified and directed for the size of 25mm bore tubing.

All as per item No. 130.00 above but 32mm bore pipe.

All as per item No. 130.00 above but 50mm bore pipe.

Taking down carefully any type of copper/ aluminium point wiring (light, fan, socket or power) complete including conduits/ casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debries and making good the disturbed surface of wall match with the original existing finish all as specified and directed.

Taking down existing ceiling and exhaust fans with all connected items and removing from site/ store and making good the disturbed surface on ceiling/fan hook and refixing on same position complete all as specified and directed.

Taking down unserviceable any type of main switch DB's icluding MCBs incl wooden/GI/MS Sheet board etc and removinf from site and making good the disturbed surface of wall etc complete all as specified and directed.

Taking down unserviceable any type of copper/aluminium sub main wiring of any size/core/type complete including conduits/casing caping etc, removing the materials/debries and making good the disturbed surface of walls, floors and ceiling etc to match with the original existing finish all as directed.

M&L for concelaed point wiring with FRLS-H, PVC insulated, unsheated multistranded copper consdutor cables 1100 volts grade of 1.5sqmm size (Phase and Neutral) alongwith one earth continuity conductor with FRLSH PVC insulated unsheated multistranded copper conductor cable 1100 volts grade of 1.5Sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated and suitable for modular metal flush box as per sire requirement for fixing of switches , sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit piping in making good to facing and pointing in using cement morter 1:3 and making good to disturbed surface complete all as specified and directed. Notes : (a) Rate of modular cover plates shall be paid seperately in respected items. (b) Rate for any type of way connector to fix fittings are deemed in rate quoted.

All as per item No 137 here in above but one 3 pin socket outlet 5 amps on the same board with cable 1.5 sqmm size complete all as directed.

All as per item No 137 here in above but one 3 pin socket outlet 5 amps independent modular board with cable 1.5 sqmm size complete all as directed.

All as per item No 137 here in above but one light point controlled by 2- way switches with cable 1.5 sqmm size complete all as directed.

M&L for point wiring to one 3 pin 15/16 amps socket outlet independent switch board, using FRLS-H PVC insulated unsheated, multistranded copper conductor cable 2.5 sqmm drawn through and including PVC conduit of min 20mm dia by cutting chases for conduits and sinkings for boxes and making good to walls, floors etc for concealed conduit wiring suitable for moduler flush box metal of GI sheet minimum 1.2 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and moduler cover plate with support frame white in colour of required modules,3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for power point controlled with cables, 2.5 sqmm size, cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete. (2.5 Sqmm for phase and neutral and 2.5 Sqmm for earthing).

S&F in repairs ceiling rose surface bakelite 65x50mm, three terminals, 240 volts all as specified and directed.

S&F repairs of tube light fitting 1x22 watts 4 feet with LED bettan with aluminium housing and integrated electronic driver including LED tube light white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells Cat Part No ENDURALINEARNEOBS22WLED865SPCWH or equivalent in Bajaj/Crompton/Philips.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for betten fitting of LED lamp 9 watt complete all as specified and directed.

S&F LED lamp 9W LED lamp suitable for B-22 holder complete all as specified and directed Make : Bajaj Cat Part No 9WCDL B22 or equivalent in Havells/Crompton/ Philips.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed.

S&F modular white cover plate with frame 2 module complete all as specified and directed.

S&F modular white cover plate with frame 3 module complete all as specified and directed.

S&F modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular white cover plate with frame 8 module complete all as specified and directed.

S&F modular white cover plate with frame 12 module complete all as specified and directed.

S&F modular switch 1 way10 Amps, 1 module complete all as specified and directed

S&F modular socket 6A 2/3 pin combined 2 module complete all specified and directed

S&F modular switch 1 way 16 Amps, 1 module complete all as specified and directed

S&F modular socket 6A/16A 2/3 pin conbined 2 module complete all specified and directed

S&F modular switch 2 way 10 Amps, 1 module complete all as specified and directed

S&F modular fan regulator 120W 2 module complete all specified and directed

S&F sheet metal enclosure double door for DBs TPN-4 way 415 volt with 200 Amp rated bus bar complete all specified and directed.

S&F DB with sheet metal enclosure 240 volts, 8 way with 200 Amp rated bus bar single pole & neutral double door type for MCBs including mounting work as required in position complete all specified and directed.

S&F DB with sheet metal enclosure 240 volts, 12 way with 200 Amp rated bus bar single pole & neutral double door type for MCBs including mounting work as required in position complete all specified and directed.

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of TP 63 Amp complete all specified and directed

S&F MCB SPN 40 amps 230V C Curve, 50HZ AC 10KA complete all specified and directed

S&F MCB SP 6 to 32 amps 230V C Curve, 50HZ AC 10KA complete all specified and directed

M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) connected to galvanised earth lead wire 4.0mm dia by mens of nuts, bolts & washers of GI as shown in electrical plate no 5 of SSR part-I connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, ewatering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed including demolish existing earth pit taking out old material and testing on completion.

M&L for sub main wiring using FRLS-H insulated unsheathed, multistrand copper conductor FRLS-H PVC cable 2 runs of size 2.5sqmm for phase and neutral and one run of 2.5 sqmm for earthing drawn through rigid PVC conduit of suitable size fixed on wall/ground/ceiling etc, amd complete all specified and directed. Note : Phase should be Red/yellow/Blue, Neutral should be black and earthing wire should be green in colour. Two runs of cable for Phase/neutral and one run of cable for earth including conduit will be measured and paid as one unit length.

M&L for sub main wiring using FRLS-H insulated unsheathed, multistrand copper conductor FRLS-H PVC cable 2 runs of size 4sqmm for phase and neutral and one run of 4 sqmm for earthing drawn through rigid PVC conduit of suitable size fixed on wall/ground/ceiling etc, amd complete all specified and directed. Note : Phase should be Red/yellow/Blue, Neutral should be black and earthing wire should be green in colour. Two runs of cable for Phase/neutral and one run of cable for earth including conduit will be measured and paid as one unit length.

M&L for sub main wiring using FRLS-H insulated unsheathed, multistrand copper conductor FRLS-H PVC cable 2 runs of size 6 sqmm for phase and neutral and one run of 6 sqmm for earthing drawn through rigid PVC conduit of suitable size fixed on wall/ground/ceiling etc, amd complete all specified and directed. Note : Phase should be Red/yellow/Blue, Neutral should be black and earthing wire should be green in colour. Two runs of cable for Phase/neutral and one run of cable for earth incl conduit will be measured and paid as one unit length. Note for item No 166 to 168 cost of cutting chases for conduit pipe will be included in the quoted rate.

S&F in energy efficient LED street light Luminaire 35 watts capacity comprises a die-cast aluminium housing including connections with 2 run of 2.5sqmm aluminium unsheated wire multistranded from LT over head line / junction box to the connector of fitting , complete all as specified and directed.

S&F street light bracket made out of GI tubing 32/40 mm dia, light grade of approx length 1.2mtr long bend to shape suitable for security light fittings with necessary MS clamps-02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolts, washers etc all as specified and directed.

Notes :- An amount of Rs. 3,36,203.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/S Abdul Ahad Rather (BID ID -3191151)

M/S GHULAM AHMAD WANI (BID ID -3191617)

M/S LATIF AHMED MIR (BID ID -3193786)

M/S BASHIR AHMAD TANTARY (BID ID -3191726)

M/S B A Traders (BID ID -3197287)

M/S SUHEEL CONSTRUCTIONS (BID ID -3191176)