Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC HOUSE NO 172 A CANAL ROAD SUJANPUR TEH DISTT PATHANKOT 145001 PUNJAB | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹14.8 L+₹4,593.92 (0.31%)Rejected-Finance 58 1ST FLOOR PATEL NAGAR BATHINDA | BATHINDA | BATHINDA | PUNJAB | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹15.5 L+₹81,888.76 (5.56%)Rejected-Finance C O 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Higher side quoted amount | |
| 4 | L4₹16.0 L+₹1.2 L (8.33%)Rejected-Finance LADO CHACK COLONY PO TEH DISTT PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
1 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Pathankot
GE West Pathankot
CERTAIN REPAIR TO BLDGS OF OTM ACCN AND MD ACCN IN AOR OF AGE B/R-I UNDER GE(WEST)PATHANKOT
2024_MES_670768_1
GE/PKT-37/2024-2025
Open Tender
Miscellaneous Works
Item Rate
270 days
GE West Pathankot
CERTAIN REPAIR TO BLDGS OF OTM ACCN AND MD ACCN IN AOR OF AGE B/R-I UNDER GE(WEST)PATHANKOT
8 documents required · 8 mandatory
₹500
GE West Pathankot
₹60,000
5 Nov 2024
3 Sept 2024
7 Oct 2024
3 Sept 2024
1 Oct 2024
17 Sept 2024
Amount
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.
Demolition of cement concrete (unreinforced) etc in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.
Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises
Taking down cement plaster/ including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed
Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.
Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.
Taking down shutters of any description n exc. 1 sqm each, complete all as specified & directed.
Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the same or other opening completa all as specified and directed.
M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.
All as per srl item No. 11 here-in-before but except brick complete all as specified.
S&F Pressed steel frames of size 125mmx60mm made of MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate.incl tarring/black bituminous paint to unexposed surface, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
S&F Pressed steel frames of size 105mmx60mm made of MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl tarring/black bituminous paint to unexposed surface, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
M&L for PCC 1:3:6 nominal mix, type C-1 using 20 mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkats, complete all as specified & directed.
S&F 35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.
S&F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.
S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet.complete all as specified and directed.
S&F 35 mm thick single piece factory made wire gauge door shutter and incl of wire cloth ( steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement.complete all as specified and directed.
S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 Sheet 1/2 including taking out old windows complete all as specified & directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Charge.
Repair to Old steel window not exc 2.00 Sqm each incl replacement of hinges, Handle, and necessary oiling ,welding to shutter and chowkhat for making window in serviceable condition, the quoted rate deemed to be included for replacement of minor parts as mentioned in item discription Complete all as specified
M&L for Hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws.
S&F factory made 18mm(+ 0.7mm) thick PVC sheet one side prelam sheet for cupboard shutter of density 600 kg /Cbm bent 90° and finish at all edges at level for making edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape etc. Complete as per direction of Engr-in-charge, Manufacture specification..
S&F in repair Prelaminated particle board, interior grade, 18/19 mm thick prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work
S&F for continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 30 mm all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed . complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed. complete all as specified and directed.
S&F Aluminium, anodised, handles 125 mm of extruded section and fixed.complete all as specified and directed.
S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame.
S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples.
S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm with statinless steel wire staples.
Hacking out old broken glass (any thickness, size, quality or description) from matel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onces exc 1.5 Sqm
S&F, 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane , complete all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each complete all as specified & directed.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 guage with stainless steel brackets near to ends with stainless steel funnels with adopter for 25 mm dia drapery rod at both ends complete all as specified and directed.
Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.
S&F steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling and floor. complete all as specified.
Disconnecting existing water tanks of capacity 1000 litres, any description, setting aside for repair, cleaning etc and hoisting reconnecting and refixing in same or other position incl cleaning with bleaching powder removing scaling etc ,provn of new GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer etc complete all as specified & directed.
Disconnecting existing water tanks of capacity 500 litres, any description, setting aside for repair, cleaning etc and hoisting reconnecting and refixing in same or other position incl cleaning with bleaching powder removing scaling etc ,provn of new GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer etc complete all as specified & directed.
S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.
S&F Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.
S&F in repair Concealed Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore
S&F in repair Bib tap 15 mm bore long body, Brass CP, fancy type , with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule complete all as specified.
S&F in reapir Bib tap 15 mm bore short body, Brass CP, fancy type, with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule, complete all as specified.
S&F in reapir Stop valve /Angle valve, fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and complete all as specified.
S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete.
S&F in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complete all as specified and as directed.
S&F in reapir , Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and as directed.
S&F in repair floor mounting single piece Vitreous china wash down water closet pan , light colour complete including fixing to trap , alongwith PP soft close seat cover, hinges and accessories complete all as specified and directed.
S&F in repair CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.
S&F in repair CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed.
S& F in repair chromium plated brass central hole single lever WHB Mixture 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed.
S&F in repair CP wall mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.
S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.
S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.
S&F in repairs Vitreous china wash basin, flate back white of,size 550 x 400 mm, including cutting for and pinning in ends of brackets or erecting stand including 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe incl fixing of taps all as spd and directed.
S&F in repair ,Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and cp brass spreder all necessary fittings, complete all as specified and directed.
S&F in repair PVC connection 15 mm bore with PTMT nuts of length 450 mm long.
M&L for Non skid ceramic jointfree coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .
M&L for Non skid ceramic jointfree coloured tiles, 7 to 8 mm thick (square/ rectangular) as in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed .
M&L for Non skid ceramic jointfree coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .
M&L for Glazed ceramic coloured tiles of size 450mmx350mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for Vitrified light shade ceremic tiles 600mmx600mmx 10 mm thick (Square/rectangular) polished in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.
M&L for Vitrified light shade ceremic tiles 600mmx 600mmx 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for 18-20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.
M&L for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.
M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching,floor by maintaing required gradient/undulation etc slightly rounded or chamferred angles and throating, complte all as specified and directed.
M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in Sub-base to floor finishes complte all as specified and directed.
M&L for Rendering 5 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified.
M&L for rendering 10mm thick in CM 1:6 on other than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in two layers(5mm +10mm) in CM 1:4 mixing with WPC on top layer @ 200ml/bag ,on fair faces of brick work concrete surface of wall, finished surface even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid separtely.
Supply only liquid water proofing compound.
M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.
M&L for Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade with and including priming surface with chalk whitening , complete all as specified.
M&L for Complete removal of existing treatment of wall surfaces and applying two coat of oil bound distemper, white or tinted shade with and including priming surface with chalk whitening , complete all as specified.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M&L for Complete removal of existing treatment of wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.
M&L for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc.
M&L for preparing of old plastered surfaces of ceiling, old decorated surfaces and applying one coats of white wash.
M&L for two coat of white wash on old plaster surface of wall including preparation of surface complete all as specified & directed
M&L for preparing of Old painted surfaces of steel or iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint.
M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L for preparing of Old painted surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint.
Taking down existing Aluminium door/window and refixing to the same opening after repairing, easing and adjusting incl replacement of damaged hinges, brass mortice lock, Elco Panel, glazing clips and SS screws complete all as specified and directed.
S&F in repair Aluminium( extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified and directed.
S&F in repair Sheet glass 4.8mm thick ,ordinary quality fixed with aluminium beading and rubber neoprene packing, gaskeet exc 0.50 sqm each. all as specified and directed.
S&F in repair 8 mm thick transparent toughened sheet glass with rubber packing fixed to metal frame including hacking out old glass complete in all respect as specified and directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. all as specified and directed.
M&L for 5mm thick Coloured/ printed Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing at site incl demolition of existing lining of any description complete all as specified and directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S&F for 3mm thick PVC sheet fillet/ Corner strip of width upto 35mm above wall paneling work, complete all as specified and directed.
M&L for Reinforced concrete 450mm bore pipes, class NP2, laid and jointed complete with collars complete all as specified and directed incl demolition of existing reinforced concrete pipes complete.
M&L for Cement concrete 1:4:8, type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 44,170.00 and any other reduction if any from quoted amount.
M/S RUDRA CONSTRUCTION CO (BID ID -3110388)
VAISHNAVI BUILDERS (BID ID -3106001)
DABGOTRA BUILDERS (BID ID -3122036)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .